We report the first observation of interference in the light scattered from two trapped atoms ({sup 198}Hg{sup +} ions localized in a linear Paul trap). The visibility of the interference fringes can be explained in the frame-work of Bragg scattering by a harmonic crystal, but with important differences compared to the case of a large crystal. Comparison of the experimental data with theory shows that the interference pattern offers another method to determine ion temperatures and separations. Furthermore, by exploiting the atom`s internal structure we have found a way to obtain {open_quotes}which path{close_quotes} information without invoking the position-momentum uncertainty relation. If the light scattered by the atoms is detected in a polarization-sensitive way, then it is possible to selectively demonstrate either the particle-nature or the wave-nature of the scattered photons.

Young`s interference experiment with light scattered from two atoms

We present a quick, simple and accurate digital holographic characterization of the Bessel beams produced by polymeric microaxicons. This technique allows the numerical reconstruction of both intensity and phase of the beam at whichever point starting from a single acquired hologram. From these data, it is possible to go back to the axicon structure, and to gather information about their characteristics. In particular, the focal length and the depth of focus of the axicon lens are experimentally measured, and the full width at half maximum of the beam is obtained too. The depth of focus, very large for a Bessel beam with respect to a Gaussian one, is successfully exploited for optical trapping of micrometric objects.

https://iopscience.iop.org/article/10.1088/0957-0233/23/6/065204/pdf

Characterization of Bessel beams generated by polymeric microaxicons

A new laser differential reflection-confocal focal-length measurement (DRCFM) method is proposed for the high-accuracy measurement of the lens focal length. DRCFM uses weak light reflected from the lens last surface to determine the vertex position of this surface. Differential confocal technology is then used to identify precisely the lens focus and vertex of the lens last surface, thereby enabling the precise measurement of the lens focal length. Compared with existing measurement methods, DRCFM has high accuracy and strong anti-interference capability. Theoretical analyses and experimental results indicate that the DRCFM relative measurement error is less than 10 ppm.

Laser differential reflection-confocal focal-length measurement

A compact, fiber-coupled, six degree-of-freedom measurement system which enables fast, accurate calibration, and error mapping of precision linear stages is presented. The novel design has the advantages of simplicity, compactness, and relatively low cost. This proposed sensor can simultaneously measure displacement, two straightness errors, and changes in pitch, yaw, and roll using a single optical beam traveling between the measurement system and a small target. The optical configuration of the system and the working principle for all degrees-of-freedom are presented along with the influence and compensation of crosstalk motions in roll and straightness measurements. Several comparison experiments are conducted to investigate the feasibility and performance of the proposed system in each degree-of-freedom independently. Comparison experiments to a commercial interferometer demonstrate error standard deviations of 0.33 μm in straightness, 0.14 μrad in pitch, 0.44 μradin yaw, and 45.8 μrad in roll.

Development of a compact, fiber-coupled, six degree-of-freedom measurement system for precision linear stage metrology

A ring-shaped random laser in momentum space is designed by directly coupling a random laser with a commercial optical fiber. By using a simple approach of selectively coating the random gain layer on the surface of the fiber, red and yellow random lasers are respectively achieved with low threshold values and a good emission direction due to the guiding role of optical fibers. The unique coupling mechanism leads to a random laser with a ring shape in momentum space, which is an excellent illuminating source for high-quality imaging with an extremely low speckle noise. More importantly, a triple-state color-switchable random laser with yellow, red and yellow-red dual-colors can be flexible, and is obtained by simply moving the pump position. The results may promote the practical applications of random lasers in the fields of sensing, in vivo biological imaging, and high brightness full-field illumination.

A ring-shaped random laser in momentum space.

A technique for fabrication of Nd-glass laser rods from raw laser glass slab is presented. Cylindrical laser glass rods are prepared by using custom made glass sawing, milling and edging machines. A square section bar of laser glass, which is sawn from the slab, is converted to that with octagonal section by flat milling of the four corners of the square section bar. The rod with octagonal section is then transformed to a rod with right circular section in a glass edging machine. A ball-bearing based setup, which can be attached to the oscillatory arm of a conventional polishing machine, for simultaneous polishing of the flat end faces of a number of laser rods fixed in holders, is described. The method is suitable for fabrication of both large and small diameter laser rods.

Sanjib Chatterjee

Papers

Simple technique for fabrication of Nd-phosphate laser glass rods for high power lasers