抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Uniform, spherical-shaped TiO2:Eu nanoparticles with different doping concentrations have been synthesized through controlled hydrolysis of titanium tetrabutoxide under appropriate pH and temperature in the presence of EuCl3·6H2O. Through air annealing at 500°C for 2 h, the amorphous, as-grown nanoparticles could be converted to a pure anatase phase. The morphology, structural, and optical properties of the annealed nanostructures were studied using X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy [EDS], and UV-Visible diffuse reflectance spectroscopy techniques. Optoelectronic behaviors of the nanostructures were studied using micro-Raman and photoluminescence [PL] spectroscopies at room temperature. EDS results confirmed a systematic increase of Eu content in the as-prepared samples with the increase of nominal europium content in the reaction solution. With the increasing dopant concentration, crystallinity and crystallite size of the titania particles decreased gradually. Incorporation of europium in the titania particles induced a structural deformation and a blueshift of their absorption edge. While the room-temperature PL emission of the as-grown samples is dominated by the 5D0 - 7Fj transition of Eu+3 ions, the emission intensity reduced drastically after thermal annealing due to outwards segregation of dopant ions.

/pdf/effects-of-crystallization-and-dopant-concentration-on-the-1axbmxo1at.pdf

Effects of crystallization and dopant concentration on the emission behavior of TiO2:Eu nanophosphors

Phosphor-converted white light-emitting diodes (pc-WLEDs) are emerging as an indispensable solid-state light source for the next generation lighting industry and display systems due to their unique properties including but not limited to energy savings, environment-friendliness, small volume, and long persistence. Until now, major challenges in pc-WLEDs have been to achieve high luminous efficacy, high chromatic stability, brilliant color-rending properties, and price competitiveness against fluorescent lamps, which rely critically on the phosphor properties. A comprehensive understanding of the nature and limitations of phosphors and the factors dominating the general trends in pc-WLEDs is of fundamental importance for advancing technological applications. This report aims to provide the most recent advances in the synthesis and application of phosphors for pc-WLEDs with emphasis specifically on: (a) principles to tune the excitation and emission spectra of phosphors: prediction according to crystal field theory, and structural chemistry characteristics (e.g. covalence of chemical bonds, electronegativity, and polarization effects of element); (b) pc-WLEDs with phosphors excited by blue-LED chips: phosphor characteristics, structure, and activated ions (i.e. Ce 3+ and Eu 2+ ), including YAG:Ce, other garnets, non-garnets, sulfides, and (oxy)nitrides; (c) pc-WLEDs with phosphors excited by near ultraviolet LED chips: single-phased white-emitting phosphors (e.g. Eu 2+ –Mn 2+ activated phosphors), red-green-blue phosphors, energy transfer, and mechanisms involved; and (d) new clues for designing novel high-performance phosphors for pc-WLEDs based on available LED chips. Emphasis shall also be placed on the relationships among crystal structure, luminescence properties, and device performances. In addition, applications, challenges and future advances of pc-WLEDs will be discussed.

Phosphors in phosphor-converted white light-emitting diodes: Recent advances in materials, techniques and properties

Photovoltaic (PV) technologies for solar energy conversion represent promising routes to green and renewable energy generation. Despite relevant PV technologies being available for more than half a century, the production of solar energy remains costly, largely owing to low power conversion efficiencies of solar cells. The main difficulty in improving the efficiency of PV energy conversion lies in the spectral mismatch between the energy distribution of photons in the incident solar spectrum and the bandgap of a semiconductor material. In recent years, luminescent materials, which are capable of converting a broad spectrum of light into photons of a particular wavelength, have been synthesized and used to minimize the losses in the solar-cell-based energy conversion process. In this review, we will survey recent progress in the development of spectral converters, with a particular emphasis on lanthanide-based upconversion, quantum-cutting and down-shifting materials, for PV applications. In addition, we will also present technical challenges that arise in developing cost-effective high-performance solar cells based on these luminescent materials.

Enhancing solar cell efficiency: the search for luminescent materials as spectral converters

A review of some properties of chalcogenide glasses and the current status of their applications is given. Techniques to characterize the linear and non-linear properties of these glasses are introduced and used to measure the optical constants of chalcogenide glasses in the form of bulk, thin film and fiber. Different techniques for the fabrication of gratings and waveguides in these glasses are described. Achievable efficiencies of gratings, as well as propagation losses of fabricated waveguides, are presented. The possibilities of fabricating active devices, such as fiber amplifiers and lasers, are presented. Finally, a novel application of chalcogenide glasses, namely all-optical switching for the fabrication of efficient femtosecond switches, is introduced.

Optical properties and applications of chalcogenide glasses: a review

The Judd-Ofelt intensity parameters, ${\mathrm{\ensuremath{\Omega}}}_{\mathit{t}}$ (t=2,4,6) for f-f transitions of ${\mathrm{Er}}^{3+}$ ions doped in ${\mathrm{B}}_{2}$${\mathrm{O}}_{3}$-${\mathit{R}}_{2}$O (R=Na,K) glasses were determined from optical-absorption measurements, and their compositional dependence was investigated systematically. The values of ${\mathrm{\ensuremath{\Omega}}}_{2}$ exhibited a maximum around 25 mol % ${\mathit{R}}_{2}$O, while those of ${\mathrm{\ensuremath{\Omega}}}_{4}$ and ${\mathrm{\ensuremath{\Omega}}}_{6}$ decreased monotonically with an increase in ${\mathit{R}}_{2}$O content. The compositional dependences of ${\mathrm{\ensuremath{\Omega}}}_{4,6}$ were consistent with those of the isomer shift in $^{151}\mathrm{Eu}$ M\"ossbauer spectroscopy, which gives information about the 6s-electron density of ${\mathrm{Eu}}^{3+}$ ions. The variation of ${\mathrm{\ensuremath{\Omega}}}_{2}$ against ${\mathit{R}}_{2}$O content was related to the change in asymmetry of the rare-earth ligand due to the structural mixing of borate groups, while those of ${\mathrm{\ensuremath{\Omega}}}_{4,6}$ were related to the local basicity of rare-earth sites in the glass.

Compositional dependence of Judd-Ofelt parameters of Er3+ ions in alkali-metal borate glasses.

Properties of transparent Ce:YAG ceramic phosphors for white LED

Persistent luminescence instead of phosphorescence: History, mechanism, and perspective

Y3Al5O12(YAG):Ce3+ is the most widely applied phosphor in white LEDs (w-LEDs) because of strong blue absorption and efficient yellow luminescence combined with a high stability and thermal quenching temperature, required for the extreme operating conditions in high-power w-LEDs. The high luminescence quenching temperature (∼600 K) has been well established, but surprisingly, the mechanism for temperature quenching has not been elucidated yet. In this report we investigate the possibility of thermal ionization as a cause of this quenching process by measuring thermoluminescence (TL) excitation spectra at various temperatures. In the TL excitation (TLE) spectrum at room temperature there is no Ce3+:5d1 band (the lowest excited 5d level). However, in the TLE spectrum at 573 K, which corresponds to the onset temperature of luminescence quenching, a TLE band due to the Ce3+:5d1 excitation was observed at around 450 nm. On the basis of our observations we conclude that the luminescence quenching of YAG:Ce3+ at ...

/pdf/insight-into-the-thermal-quenching-mechanism-for-y3al5o12-xom1er6ef1.pdf

Setsuhisa Tanabe

Papers

Compositional dependence of Judd-Ofelt parameters of Er3+ ions in alkali-metal borate glasses.

Properties of transparent Ce:YAG ceramic phosphors for white LED

Persistent luminescence instead of phosphorescence: History, mechanism, and perspective

Insight into the Thermal Quenching Mechanism for Y3Al5O12:Ce3+ through Thermoluminescence Excitation Spectroscopy

Fluorescence properties of Er3+ ions in glass ceramics containing LaF3 nanocrystals