Energy and buildings

In recent years, many scholars have dedicated their research to the development of low-cost sensors for monitoring of various parameters. Despite their high number of applications, the state of the art related to low-cost sensors in building monitoring has not been addressed. To fill this gap, this article presents a systematic review, following well-established methodology, to analyze the state of the art in two aspects of structural and indoor parameters of buildings, in the SCOPUS database. This analysis allows to illustrate the potential uses of low-cost sensors in the building sector and addresses the scholars the preferred communication protocols and the most common microcontrollers for installation of low-cost monitoring systems. In addition, special attention is paid to describe different areas of the two mentioned fields of building monitoring and the most crucial parameters to be monitored in buildings. Finally, the deficiencies in line with limited number of studies carried out in various fields of building monitoring are overviewed and a series of parameters that ought to be studied in the future are proposed.

https://www.mdpi.com/2075-5309/11/8/336/pdf

Application of Low-Cost Sensors for Building Monitoring: A Systematic Literature Review

Nowadays, low-cost accelerometers are getting more attention from civil engineers to make Structural Health Monitoring (SHM) applications affordable and applicable to a broader range of structures. The present accelerometers based on Arduino or Raspberry Pi technologies in the literature share some of the following drawbacks: (1) high Noise Density (ND), (2) low sampling frequency, (3) not having the Internet’s timestamp with microsecond resolution, (4) not being used in experimental eigenfrequency analysis of a flexible and a less-flexible bridge, and (5) synchronization issues. To solve these problems, a new low-cost triaxial accelerometer based on Arduino technology is presented in this work (Low-cost Adaptable Reliable Accelerometer—LARA). Laboratory test results show that LARA has a ND of 51 µg/√Hz, and a frequency sampling speed of 333 Hz. In addition, LARA has been applied to the eigenfrequency analysis of a short-span footbridge and its results are compared with those of a high-precision commercial sensor.

/pdf/low-cost-wireless-structural-health-monitoring-of-bridges-1dbjlf0d.pdf

Low-Cost Wireless Structural Health Monitoring of Bridges

This paper reviews recent advances in sensor technologies for non-destructive testing (NDT) and structural health monitoring (SHM) of civil structures. The article is motivated by the rapid developments in sensor technologies and data analytics leading to ever-advancing systems for assessing and monitoring structures. Conventional and advanced sensor technologies are systematically reviewed and evaluated in the context of providing input parameters for NDT and SHM systems and for their suitability to determine the health state of structures. The presented sensing technologies and monitoring systems are selected based on their capabilities, reliability, maturity, affordability, popularity, ease of use, resilience, and innovation. A significant focus is placed on evaluating the selected technologies and associated data analytics, highlighting limitations, advantages, and disadvantages. The paper presents sensing techniques such as fiber optics, laser vibrometry, acoustic emission, ultrasonics, thermography, drones, microelectromechanical systems (MEMS), magnetostrictive sensors, and next-generation technologies.

/pdf/a-systematic-review-of-advanced-sensor-technologies-for-non-1k9cqxt7.pdf

A Systematic Review of Advanced Sensor Technologies for Non-Destructive Testing and Structural Health Monitoring

The building materials of Cultural Heritage monuments are subjected to continuous degradation throughout the years, mainly due to their exposure to harsh and unexpected weather phenomena related to Climate Change. The specific climatic conditions at their vicinity, especially when there are local peculiarities such as onshore breeze, are of crucial importance for studying the deterioration rate and the identification of proper mitigation actions. Generalized models that are based on climate data can provide an insight on the deterioration but fail to offer a deeper understanding of this phenomenon. To this end, in the context of the EU-funded HYPERION project a distributed smart sensor network will be deployed at the Cultural Heritage monuments in four study areas as the solution to this problem. The developed system, which is demonstrated in this paper, includes smart IoT devices, called Smart Tags, designed to provide environmental measurements close to monuments, a middle-ware to facilitate the communication and a visualization platform where the collected information is presented. Last but not least, special focus is given to the device’s NB-IoT connectivity and its power efficiency by conducting various tests and extract useful conclusions.

/pdf/smart-tags-iot-sensors-for-monitoring-the-micro-climate-of-ceqphzjw.pdf

Smart Tags: IoT Sensors for Monitoring the Micro-Climate of Cultural Heritage Monuments

Nowadays, engineers are widely using accelerometers to record the vibration of structures for structural verification purposes. The main obstacle for using these data acquisition systems is their high cost, which limits its use to unique structures with a relatively high structural health monitoring budget. In this paper, a Cost Hyper-Efficient Arduino Product (CHEAP) has been developed to accurately measure structural accelerations. CHEAP is a system that is composed of five low-cost accelerometers that are connected to an Arduino microcontroller as their data acquisition system. Test results show that CHEAP not only has a significantly lower price (14 times cheaper in the worst-case scenario) compared with other systems used for comparison but also shows better accuracy on low frequencies for low acceleration amplitudes. Moreover, the final output results of Fast Fourier Transformation (FFT) assessments showed a better observable resolution for CHEAP than the studied control systems.

Development of a Low-Cost System for the Accurate Measurement of Structural Vibrations.

Direct simulation of the tensioning process of cable-stayed bridge cantilever construction

Owing to the high energy consumption in the building sector, appraising the thermal performance of building envelopes is an increasing concern. Recently, a few in situ methodologies to diagnose the thermal parameters of buildings have been considered. However, because of their limitations such as low accuracy, limited number of measurements, and the high cost of monitoring devices, researchers are seeking a new alternative. In this study, a novel hyper-efficient Arduino transmittance-meter was introduced to overcome these limitations and determine the thermal parameters of building envelopes. Unlike conventional methodologies, the proposed transmittance-meter is based on synchronized measurements of different parameters necessary to estimate the transmittance parameter. To verify the applicability of the transmittance-meter, an experimental study was conducted wherein a temperature-controlled box model was thermally monitored, and the outputs of the transmittance-meter employed were compared with those captured by a commercial device. The results revealed a high level of reduction in cost and a low range of difference compared with the latter, thereby validating the applicability of the proposed thermal monitoring system.

/pdf/a-novel-data-acquisition-system-for-obtaining-thermal-g31uyw0a.pdf

A Novel Data Acquisition System for Obtaining Thermal Parameters of Building Envelopes

Structural damage detection using inclinometers is getting wide attention from researchers. However, the high price of inclinometers limits this system to unique structures with a relatively high structural health monitoring (SHM) budget. This paper presents a novel low-cost inclinometer, the low-cost adaptable reliable angle-meter (LARA), which combines five gyroscopes and five accelerometers to measure inclination. LARA incorporates Internet of Things (IoT)-based microcontroller technology enabling wireless data streaming and free commercial software for data acquisition. This paper investigates the accuracy, resolution, Allan variance and standard deviation of LARA produced with a different number of combined circuits, including an accelerometer and a gyroscope. To validate the accuracy and resolution of the developed device, its results are compared with those obtained by numerical slope calculations and a commercial inclinometer (HI-INC) in laboratory conditions. The results of a load test experiment on a simple beam model show the high accuracy of LARA (0.003 degrees). The affordability and high accuracy of LARA make it applicable for structural damage detection on bridges using inclinometers.

/pdf/a-novel-wireless-low-cost-inclinometer-made-from-combining-26thz5a5.pdf

Seyedmilad Komarizadehasl

Papers

Development of a Low-Cost System for the Accurate Measurement of Structural Vibrations.

Low-Cost Wireless Structural Health Monitoring of Bridges

Direct simulation of the tensioning process of cable-stayed bridge cantilever construction

A Novel Data Acquisition System for Obtaining Thermal Parameters of Building Envelopes

A Novel Wireless Low-Cost Inclinometer Made from Combining the Measurements of Multiple MEMS Gyroscopes and Accelerometers