Various types of onboard atomic clocks such as rubidium, cesium and hydrogen have different frequency accuracies and frequency drift rate characteristics. A passive hydrogen maser (PHM) has the advantage of low-frequency drift over a long period, which is suitable for long-term autonomous satellite time keeping. The third generation of Beidou Satellite Navigation System (BDS3) is equipped with PHMs which have been independently developed by China for their IGSO and MEO experimental satellites. Including Galileo, it is the second global satellite navigation system that uses PHM as a frequency standard for navigation signals. We briefly introduce the PHM design at the Shanghai Astronomical Observatory (SHAO) and detailed performance evaluation of in-orbit PHMs. Using the high-precision clock values obtained by satellite-ground and inter-satellite measurement and communication systems, we analyze the frequency stability, clock prediction accuracy and clock rate variation characteristics of the BDS3 experimental satellites. The results show that the in-orbit PHM frequency stability of the BDS3 is approximately 6 × 10−15 at 1-day intervals, which is better than those of other types of onboard atomic clocks. The BDS3 PHM 2-, 10-h and 7-day clock prediction precision values are 0.26, 0.4 and 2.2 ns, respectively, which are better than those of the BDS3 rubidium clock and most of the GPS Block IIF and Galileo clocks. The BDS3 PHM 15-day clock rate variation is − 1.83 × 10−14 s/s, which indicates an extremely small frequency drift. The 15-day long-term stability results show that the BDS3 PHM in-orbit stability is roughly the same as the ground performance test. The PHM is expected to provide a highly stable time and frequency standard in the autonomous navigation case.

Performance of the BDS3 experimental satellite passive hydrogen maser

Since November 2017, eight BeiDou global navigation system (BDS-3) satellites equipped with Ka-band inter-satellite link (ISL) payloads have been launched into medium earth orbit. We present the precise orbit determination (POD) for BDS-3 satellites using both L-band satellite-ground and Ka-band ISL observations. The satellite-ground tracking data are collected from the international GNSS Monitoring and Assessment System stations. The data period is DOY (day of year) 127---156, 2018. The BDS-3 ISL measurements are described by a dual one-way observation model. After transforming the dual one-way observations to the same epoch, clock-free and geometry-free observables can be obtained by the addition and subtraction of dual one-way observations. Using the geometry-free observables, the ISL measurement noise is analyzed and confirmed to be less than 10?cm. Using the clock-free observables and ground tracking data, the precise orbits are determined together with combined ISL hardware delays. For the estimates of hardware delays, the mean STD is 0.08?ns. For the satellite orbits, the ground-only POD solutions are also computed for comparison. When using 16 globally distributed ground stations, the addition of the ISLs improves the POD performance. For example, the 3D RMS of orbit overlap differences is reduced from 15.9?cm to 9.2?cm, yielding an improvement of 42% compared to ground-only POD. When only 6 stations in China are used for POD, the addition of ISLs enables the 3D RMS to be reduced from 85.4?cm to 14.8?cm with a greater improvement of 83%.

Precise orbit determination for BDS-3 satellites using satellite-ground and inter-satellite link observations

BeiDou Global Navigation Satellite System (BDS-3) not only performs the normal positioning, navigation and timing (PNT) functions, but also provides featured services, which are divided into geostationary orbit (GEO) and medium earth orbit (MEO) satellite-based featured services in this paper. The former refers to regional services consisting of the regional short message communication service (RSMCS), the radio determination satellite service (RDSS), the BDS satellite-based augmented service (BDSBAS) and the satellite-based precise point positioning service via B2b signal (B2b-PPP). The latter refers to global services consisting of the global short message communication service (GSMCS) and the MEO satellite-based search and rescue (MEOSAR) service. The focus of this paper is to describe these featured services and evaluate their performances. The results show that the inter-satellite link (ISL) contributes a lot to the accuracy improvement of orbit determination and time synchronization for the whole constellation. Compared with some other final products, the root mean squares (RMS) of the BDS-3 precise orbits and broadcast clock are 25.1 cm and 2.01 ns, respectively. The positioning accuracy of single frequency is better than 6 m, and that of the generalized RDSS is usually better than 12 m. For featured services, the success rates of RSMCS and GSMCS are better than 99.9% and 95.6%, respectively; the positioning accuracies of single and dual frequency BDSBAS are better than 3 and 2 m, respectively; the positioning accuracy of B2b-PPP is better than 0.6 m, and the convergence time is usually smaller than 30 min; the single station test shows that the success rate of MEOSAR is better than 99%. Due to the ISL realization in the BDS-3 constellation, the performance and capacities of the global featured services are improved significantly.

Featured services and performance of BDS-3

Abstract Since the first pair of BeiDou satellites was deployed in 2000, China has made continuous efforts to establish its own independent BeiDou Navigation Satellite System (BDS) to provide the regional radio determination satellite service as well as regional and global radio navigation satellite services, which rely on the high quality of orbit and clock products. This article summarizes the achievements in the precise orbit determination (POD) of BDS satellites in the past decade with the focus on observation and orbit dynamic models. First, the disclosed metadata of BDS satellites is presented and the contribution to BDS POD is addressed. The complete optical properties of the satellite bus as well as solar panels are derived based on the absorbed parameters as well the material properties. Secondly, the status and tracking capabilities of the L-band data from accessible ground networks are presented, while some low earth orbiter satellites with onboard BDS tracking capability are listed. The topological structure and measurement scheme of BDS Inter-Satellite-Link (ISL) data are described. After highlighting the progress on observation models as well as orbit perturbations for BDS, e.g., phase center corrections, satellite attitude, and solar radiation pressure, different POD strategies used for BDS are summarized. In addition, the urgent requirement for error modeling of the ISL data is emphasized based on the analysis of the observation noises, and the incompatible characteristics of orbit and clock derived with L-band and ISL data are illuminated and discussed. The further researches on the improvement of phase center calibration and orbit dynamic models, the refinement of ISL observation models, and the potential contribution of BDS to the estimation of geodetic parameters based on L-band or ISL data are identified. With this, it is promising that BDS can achieve better performance and provides vital contributions to the geodesy and navigation. 

/pdf/precise-orbit-determination-for-bds-satellites-3q2hxple.pdf

Precise orbit determination for BDS satellites

/pdf/precise-orbit-determination-for-bds-satellites-12uveuqo.pdf

Shanshi Zhou

Papers

Time synchronization of new-generation BDS satellites using inter-satellite link measurements