Dye and its removal from aqueous solution by adsorption: A review

Dye effluents released from numerous dye-utilizing industries are harmful towards the environment and living things. Consequently, existence of dye effluent in environmental water bodies is becoming a growing concern to environmentalists and civilians. A long term sustainable and efficient dye effluent treatment method should be established to eliminate this issue. Dye wastewater should be treated first before release to minimize its negative impacts towards the environment and living things. However, due to lack of information on efficient dye removal methods, it is difficult to decide on a single technique that resolves the prevailing dye effluent issue. Therefore, this paper reviews existing research papers on various biological, chemical and physical dye removal methods to find its efficiency through percentage of dye removal. Although there are numerous existing tried and tested methods to accomplish dye removal, most of them have a common disadvantage which is the generation of secondary pollution to the environment. This paper highlights enzyme degradation (biological) and adsorption (physical) dye removal as these are known as one of the most efficient dye removal techniques these days. This paper also suggests the usage of a combined adsorbent as it is envisioned that this technique has better efficiency and is able to remove dyes at a faster rate.

Efficiency of various recent wastewater dye removal methods: A review

Guidelines for the use and interpretation of adsorption isotherm models: A review.

https://cyberleninka.org/article/n/638974.pdf

Characteristics and adsorption capacities of low-cost sorbents for wastewater treatment: A review

A review on heavy metal pollution, toxicity and remedial measures: Current trends and future perspectives

The kinetics and mechanism of methylene blue adsorption onto raw pine cone biomass (Pinus radiata) was investigated under various physicochemical parameters. The extent of the methylene blue dye adsorption increased with increases in initial dye concentration, contact time and solution pH but decreases with the amount of adsorbent, salt concentration and temperature of the system. Overall the kinetic studies showed that the methylene blue adsorption process followed pseudo-second-order kinetics among various kinetic models tested. The different kinetic parameters including rate constant, half-adsorption time and diffusion coefficient are determined at different physicochemical conditions. Equilibrium data were best represented by Langmuir isotherm among Langmuir and Freundlich adsorption isotherm. The maximum monolayer adsorption capacity of pine cone biomass was 109.89 mg/g at 30°C. The value of separation factor, R
 L, from Langmuir equation and Freundlich constant, n, both give an indication of favourable adsorption. Thermodynamic parameters such as standard Gibbs free energy (∆G
 0), standard enthalpy (∆H
 0), standard entropy (∆S
 0) and the activation energy (A) were calculated. A single-stage batch absorber design for the methylene blue adsorption onto pine cone biomass has been presented based on the Langmuir isotherm model equation.

Equilibrium, Kinetics and Mechanism of Removal of Methylene Blue from Aqueous Solution by Adsorption onto Pine Cone Biomass of Pinus radiata

Agricultural solid wastes either in natural or in modified forms have been successfully used for decades as non-conventional cost-effective adsorbents for removing metal ions and dyes from their aqueous phase and have been recognized as a sustainable solution for wastewater treatment. Therefore, this review article provides extensive literature information about heavy metals and dyes, their classifications and toxicity, various treatment methods with emphasis on adsorption characteristics by numerous agricultural solid wastes, or agricultural solid waste-derived adsorbents under various physicochemical process conditions. This review article not only provided an up-to-date information on the application of sustainable low-cost alternative adsorbents such as agricultural solid wastes, agricultural by-products, and biomass-based cost-effective activated carbon and various other natural materials in the batch adsorptive removal of heavy metal and dye from aqueous phase but also presented a comprehensive compilation of adsorptive pollutant removal information based on various reported continuous column operation studies which is one of the new aspect to this review article. The effectiveness of various batch and column operational process parameters on mechanistic adsorptive removal of both heavy metals and dyes by various agricultural solid waste-based adsorbents has been critically discussed here. Batch and column adsorption mechanism, batch kinetics, column dynamic modeling, and adsorptive behavior of adsorbents under various process parameters have also been critically analyzed and compared. Finally, literature information on recovery and regeneration through desorption techniques and cost comparison of various agricultural solid waste adsorbents with commercial activated carbons have also been reported here. Conclusions have been drawn from the literature reviewed, and few suggestions for future research direction are proposed.

A Review on Heavy Metal Ions and Dye Adsorption from Water by Agricultural Solid Waste Adsorbents

In this study, the adsorptive effectiveness of sustainable and cost-effective eucalyptus bark biomass in the removal of methylene blue (MB) dye from its aqueous solution has been tested using a packed bed up-flow column experiment. A series of column experiments using raw eucalyptus bark was performed to determine the breakthrough curves with varying inlet MB dye flow rate (10–15 mL min−1), initial MB dye concentration (50–100 mg L−1) and adsorbent bed height (10–15 cm). High bed height, low flow rate and high initial dye concentration were found to be the better conditions for maximum dye adsorption. To predict the breakthrough curves and to determine the characteristic parameters of the column dynamics for industrial applications and for process design, Thomas model, Yoon–Nelson model and bed depth service time model were applied to experimental breakthrough data. All models were found suitable for describing the dynamic behaviour of the column, with respect to MB flow rate, initial dye concentration and adsorbent bed height. The findings revealed that eucalyptus bark biomass has a high adsorption potential for the removal of MB dye from aqueous solutions in a column system, and that it could be used to treat dye-containing effluents.

Sharmeen Afroze

Papers

Dye and its removal from aqueous solution by adsorption: A review

Equilibrium, Kinetics and Mechanism of Removal of Methylene Blue from Aqueous Solution by Adsorption onto Pine Cone Biomass of Pinus radiata

A Review on Heavy Metal Ions and Dye Adsorption from Water by Agricultural Solid Waste Adsorbents

Adsorption performance of continuous fixed bed column for the removal of methylene blue (MB) dye using Eucalyptus sheathiana bark biomass

Adsorption removal of zinc (II) from aqueous phase by raw and base modified Eucalyptus sheathiana bark: Kinetics, mechanism and equilibrium study