Origami-inspired isolators with quasi-zero stiffness for coupled axial-torsional vibration

Optical detection equipment (ODE) is subjected to vibrations that hamper the quality of imaging. In this paper, an active vibration isolation and compensation system (VICS) for the ODE is developed and systematically studied to improve the optical imaging quality. An active vibration isolator for cameras is designed, employing a dual-loop control strategy with position compensation and integral force feedback (IFF) control, and establishing the mapping relationship between vibration and image quality. A performance metric for evaluating images is also proposed. Finally, an experimental platform is constructed to verify its effectiveness. Based on the experimental results, it can be concluded that the proposed VICS effectively isolates vibrations, resulting in a reduction of 13.95 dB in the peak at the natural frequency and an 11.76 Hz widening of the isolation bandwidth compared with the system without it. At the same time, the experiments demonstrate that the image performance metric value increases by 46.03% near the natural frequency.

An Active Vibration Isolation and Compensation System for Improving Optical Image Quality: Modeling and Experiment

Analytical and experimental validation of vibration isolation system with complementary stiffness and composite control

A novel power-on-reset (POR) circuit with simple architecture, small values of capacitances, ultra-lower power consumption, and self-adjustable delay time of reset pulse for passive UHF RFID tags is presented in this paper. A proposed delay element was adopted for the features of small capacitances and wide power supply rise time range. An inverter was used as a two-inputs logic device to simplify the architecture of the circuit. The technology used for design and simulation is SMIC 0.18 μm RF. Simulation results show that the circuit functions well under different process corners with different power supply rise time, and is able to generate a POR signal after the power supply is briefly powered off. The static power consumption is less than 30 pA. Moreover, the circuit operates properly along with other modules of analog front-end.

Shibo Fu

Papers

Analytical and experimental validation of vibration isolation system with complementary stiffness and composite control

A novel power-on-reset circuit for passive UHF RFID tag chip

An Active Vibration Isolation and Compensation System for Improving Optical Image Quality: Modeling and Experiment