In spite of the massive efforts in researching and developing mobile ad hoc networks in the last decade, this type of network has not yet witnessed mass market deployment. The low commercial penetration of products based on ad hoc networking technology could be explained by noting that the ongoing research is mainly focused on implementing military or specialized civilian applications. On the other hand, users are interested in general-purpose applications where high bandwidth and open access to the Internet are consolidated and cheap commodities. To turn mobile ad hoc networks into a commodity, we should move to more pragmatic "opportunistic ad hoc networking" in which multihop ad hoc networks are not isolated self-configured networks, but rather emerge as a flexible and low-cost extension of wired infrastructure networks coexisting with them. Indeed, a new class of networks is emerging from this view: mesh networks. This article provides an overview of mesh networking technology. In particular, starting from commercial case studies we describe the core building blocks and distinct features on which wireless mesh networks should be based. We provide a survey of the current state of the art in off-the-shelf and proprietary solutions to build wireless mesh networks. Finally, we address the challenges of designing a high-performance, scalable, and cost-effective wireless mesh network.

Mesh networks: commodity multihop ad hoc networks

The IEEE 802.16 family of standards and its associated industry consortium, WiMax, promise to deliver high data rates over large areas to a large number of users in the near future. This exciting addition to current broadband options such as DSL, cable, and WiFi promises to rapidly provide broadband access to locations in the world's rural and developing areas where broadband is currently unavailable, as well as competing for urban market share. WiMax's competitiveness in the marketplace largely depends on the actual data rates and ranges that are achieved, but this has been difficult to judge due to the large number of possible options and competing marketing claims. This article first provides a tutorial overview of 802.16. Then, based on extensive recent studies, this article presents the realistic attainable throughput and performance of expected WiMax compatible systems based on the 802.16d standard approved in June 2004 (now named 802.16-2004). We also suggest future enhancements to the standard that could at least quadruple the achievable data rate, while also increasing the robustness and coverage, with only moderate complexity increases

/pdf/broadband-wireless-access-with-wimax-802-16-current-7qjy2h9yfb.pdf

Broadband wireless access with WiMax/802.16: current performance benchmarks and future potential

During the last few years, users ail over the world have become more and more accustomed to the availability of broadband access. This has boosted the use of a wide variety both of established and recent multimedia applications. However, there are cases where it is too expensive for network providers to serve a community of users. This is typically the case in rural and suburban areas, where there is slow deployment (or no deployment at all) of traditional wired technologies for broadband access (e.g., cable modems, xDSL). In those cases, the most promising opportunity rests with broadband wireless access technologies, such as the IEEE 802.16, also known as WiMAX. One of the features of the MAC layer of 802.16 is that it is designed to differentiate service among traffic categories with different multimedia requirements. This article focuses on mechanisms that are available in an 802.16 system to support quality of service (QoS) and whose effectiveness is evaluated through simulation

http://cng1.iet.unipi.it/~claudio/public/cicconetti06quality.pdf

Quality of service support in IEEE 802.16 networks

A method is described comprising: transmitting a training signal from each antenna of a base station to each of a plurality of client devices, each of the client devices analyzing each training signal to generate channel characterization data, and transmitting the channel characterization data back to the base station; storing the channel characterization data for each of the plurality of client devices; receiving data to be transmitted to each of the client devices; and precoding the data using the channel characterization data associated with each respective client device to generate precoded data signals for each antenna of the base station; and transmitting the precoded data signals through each antenna of the base station to each respective client device.

System and method for distributed input-distributed output wireless communications

Relaying and cooperation have re-emerged as important research topics in wireless communication over the past half-decade. Although multihop relaying for coverage extension in wireless networks is an old concept, it became practical only recently. Nowhere is this better illustrated than in the IEEE 802.16 working group, which has devoted a task group to incorporating relay capabilities in the foundation of mobile WiMAX-IEEE 802.16e-2005. Currently, this task group is in the process of finishing IEEE 802.16j, the multihop relay specification for 802.16. This amendment will be fully compatible with 802.16e-2005 mobile and subscriber stations, but a BS specific to 802.16j will be required for relays to operate. This article presents an introduction to the upcoming IEEE 802.16j amendment and provides insight about the obstacles that practical system designers face when incorporating relaying into a wireless broadband network.

The future of WiMAX: Multihop relaying with IEEE 802.16j

The broadband wireless access industry, which provides high-rate network connections to stationary sites, has matured to the point at which it now has a standard for second-generation wireless metropolitan area networks. The IEEE standard 802.16, with its WirelessMAN/sup TM/ air interface, sets the stage for widespread and effective deployments worldwide. This article overviews the technical medium access control and physical layer features of this new standard.

/pdf/ieee-standard-802-16-a-technical-overview-of-the-wirelessman-1kdzlm8b5d.pdf

IEEE standard 802.16: a technical overview of the WirelessMAN/sup TM/ air interface for broadband wireless access

Location Based Services for Mobiles :Technologies and Standards

A method and apparatus for randomizing access probes from co-located mobile terminals in order to reduce collisions is provided. By each mobile terminal or group of mobile terminals computing a random delay between a minimum delay value and a maximum delay value and using the random delay to delay the starting time of access probes, collisions between access probes from different mobile terminals may be reduced.

Access probe randomization for wireless communication system

A method of executing to battery power consumption between an access terminal (AT) and an access network (AN) in a wireless communication system is disclosed. More specifically, the method includes transmitting a notification message to the AN, receiving a confirmation message from the AN, and entering the power-saving mode according to the determined power saving mode. Here, the notification message includes at least one of battery life information and a power-saving mode request, and the confirmation message includes a determined power saving mode which is based on the at least one of battery life information and the power-saving mode request.

Method of providing notification for battery power conservation in a wireless system

A method of transmitting and receiving data using superposition modulation in a wireless communication system having multiple antennas is disclosed. More specifically, the method comprises encoding the at least one inputted data stream by a channel coding scheme, puncturing the at least one inputted coded data stream into at least two sub-streams, layer-modulating the at least two sub-streams using layer-modulation schemes, transmitting the layered-modulated sub-streams via the multiple antennas, wherein transmission power of each antenna is based channel condition, and receiving by at least one user the layered-modulated sub-stream, wherein the each user uses different demodulation scheme.

Shu Wang

Papers

IEEE standard 802.16: a technical overview of the WirelessMAN/sup TM/ air interface for broadband wireless access

Location Based Services for Mobiles :Technologies and Standards

Access probe randomization for wireless communication system

Method of providing notification for battery power conservation in a wireless system

A method of transmitting and receiving data using superposition modulation in a wireless communication system