Electrochemical capacitors, also called supercapacitors, store energy using either ion adsorption (electrochemical double layer capacitors) or fast surface redox reactions (pseudo-capacitors). They can complement or replace batteries in electrical energy storage and harvesting applications, when high power delivery or uptake is needed. A notable improvement in performance has been achieved through recent advances in understanding charge storage mechanisms and the development of advanced nanostructured materials. The discovery that ion desolvation occurs in pores smaller than the solvated ions has led to higher capacitance for electrochemical double layer capacitors using carbon electrodes with subnanometre pores, and opened the door to designing high-energy density devices using a variety of electrolytes. Combination of pseudo-capacitive nanomaterials, including oxides, nitrides and polymers, with the latest generation of nanostructured lithium electrodes has brought the energy density of electrochemical capacitors closer to that of batteries. The use of carbon nanotubes has further advanced micro-electrochemical capacitors, enabling flexible and adaptable devices to be made. Mathematical modelling and simulation will be the key to success in designing tomorrow's high-energy and high-power devices.

https://hal.archives-ouvertes.fr/hal-02417326/document

Materials for electrochemical capacitors

https://www.jpcomplex.ir/Content/media/image/2013/08/772_orig.pdf

Electrochemical technologies in wastewater treatment

1: Magnetic Particles: Preparation, Properties and Applications: M. Ozaki. 2: Maghemite (gamma-Fe2O3): A Versatile Magnetic Colloidal Material C.J. Serna, M.P. Morales. 3: Dynamics of Adsorption and Oxidation of Organic Molecules on Illuminated Titanium Dioxide Particles Immersed in Water M.A. Blesa, R.J. Candal, S.A. Bilmes. 4: Colloidal Aggregation in Two-Dimensions A. Moncho-Jorda, F. Martinez-Lopez, M.A. Cabrerizo-Vilchez, R. Hidalgo Alvarez, M. Quesada-PMerez. 5: Kinetics of Particle and Protein Adsorption Z. Adamczyk.

Surface and Colloid Science

https://web.iitd.ac.in/~arunku/files/CEL311_Y13/Adsorption%20Theory%20to%20practice_Dabrowski.pdf

Adsorption — from theory to practice

Mistakes and inconsistencies regarding adsorption of contaminants from aqueous solutions: A critical review.

Self-assembled mesoporous carbon (MC) materials have been synthesized and tested for application in capacitive deionization (CDI) of saline water. MC was prepared by self-assembly of a triblock copolymer with hydrogen-bonded chains via a phenolic resin, such as resorcinol or phloroglucinol in acidic conditions, followed by carbonization and, in some cases, activation by KOH. Carbon synthesized in this way was ground into powder, from which activated MC sheets were produced. In a variation of this process, after the reaction of triblock copolymer with resorcinol or phloroglucinol, the gel that was formed was used to coat a graphite plate and then carbonized. The coated graphite plate in this case was not activated and was tested to serve as current collector during the CDI process. The performance of these MC materials was compared to that of carbon aerogel for salt concentrations ranging between 1000 ppm and 35,000 ppm. Resorcinol-based MC removed up to 15.2 mg salt per gram of carbon, while carbon aerogel removed 5.8 mg salt per gram of carbon. Phloroglucinol-based MC-coated graphite exhibited the highest ion removal capacity at 21 mg of salt per gram of carbon for 35,000 ppm salt concentration.

Mesoporous Carbon for Capacitive Deionization of Saline Water

Characterization of metal ion interactions with chitosan by X-ray photoelectron spectroscopy

An electrical double-layer model is developed to predict electrosorption of ions from aqueous solutions by carbon aerogel electrodes. The carbon aerogel electrodes are treated as electrical double-layer capacitors, and electrosorption is modeled using classical electrical double-layer theory. Because of the porous characteristics of the electrodes, the total capacity of the system is obtained by summing the contributions of the individual pores. The pore size distribution of the carbon aerogel is measured by the physical adsorption of N2 and CO2 as well as by mercury intrusion porosimetry. When a pore has a width smaller than a specific value (cutoff pore width), it does not contribute to the total capacity because of the electrical double-layer overlapping effect. This effect greatly reduces the electrosorption capacity for electrodes with significant numbers of micropores, such as carbon aerogel; thus, it is considered in the electrical double-layer model. The model in this study focuses on the electros...

Electrosorption of ions from aqueous solutions by carbon aerogel: An electrical double-layer model

Electrosorption is generally defined as potential-induced adsorption on the surface of charged electrodes. After polarization of the electrodes, ions are removed from the electrolyte solution by the imposed electric field and adsorbed onto the surface of the electrodes. Experimental and modeling studies were conducted using two types of carbon aerogel composites of different surface areas to provide a better understanding on the mechanisms of electrosorption. The experimental results revealed that no significant specific adsorption of F− ions occurred, while strong specific adsorption was observed for NO3− and Cu2+ ions. In addition, although the two types of carbon aerogel electrodes had different surface areas, their capacities were found to be very similar because of the electrical double-layer overlapping effect in micropores. An electrical double-layer model developed in our previous work (16), in which the electrical double-layer overlapping correction is included, is expanded in the present work by considering the effect of the specific adsorption on the electrosorption process. Modeling results were compared with experimental data obtained under various conditions. When the overlapping effect and specific adsorption were considered, the model provided results that were in good agreement with experimental data.

Sotira Yiacoumi

Papers

Mesoporous Carbon for Capacitive Deionization of Saline Water

Characterization of metal ion interactions with chitosan by X-ray photoelectron spectroscopy

Electrosorption of ions from aqueous solutions by carbon aerogel: An electrical double-layer model

Electrosorption of ions from aqueous solutions by nanostructured carbon aerogel.

Microbubble generation for environmental and industrial separations