As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...

Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?

Jenny Schneider,*,† Masaya Matsuoka,‡ Masato Takeuchi,‡ Jinlong Zhang, Yu Horiuchi,‡ Masakazu Anpo,‡ and Detlef W. Bahnemann*,† †Institut fur Technische Chemie, Leibniz Universitaẗ Hannover, Callinstrasse 3, D-30167 Hannover, Germany ‡Faculty of Engineering, Osaka Prefecture University, 1 Gakuen-cho, Sakai Osaka 599-8531, Japan Key Lab for Advanced Materials and Institute of Fine Chemicals, East China University of Science and Technology, Shanghai 200237, China

Understanding TiO2 photocatalysis: mechanisms and materials.

Recent years have seen a renewed interest in the harvesting and conversion of solar energy. Among various technologies, the direct conversion of solar to chemical energy using photocatalysts has received significant attention. Although heterogeneous photocatalysts are almost exclusively semiconductors, it has been demonstrated recently that plasmonic nanostructures of noble metals (mainly silver and gold) also show significant promise. Here we review recent progress in using plasmonic metallic nanostructures in the field of photocatalysis. We focus on plasmon-enhanced water splitting on composite photocatalysts containing semiconductor and plasmonic-metal building blocks, and recently reported plasmon-mediated photocatalytic reactions on plasmonic nanostructures of noble metals. We also discuss the areas where major advancements are needed to move the field of plasmon-mediated photocatalysis forward.

Plasmonic-metal nanostructures for efficient conversion of solar to chemical energy

A fundamental change has been achieved in understanding surface electrochemistry due to the profound knowledge of the nature of electrocatalytic processes accumulated over the past several decades and to the recent technological advances in spectroscopy and high resolution imaging. Nowadays one can preferably design electrocatalysts based on the deep theoretical knowledge of electronic structures, via computer-guided engineering of the surface and (electro)chemical properties of materials, followed by the synthesis of practical materials with high performance for specific reactions. This review provides insights into both theoretical and experimental electrochemistry toward a better understanding of a series of key clean energy conversion reactions including oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). The emphasis of this review is on the origin of the electrocatalytic activity of nanostructured catalysts toward the aforementioned reactions by correlating the apparent electrode performance with their intrinsic electrochemical properties. Also, a rational design of electrocatalysts is proposed starting from the most fundamental aspects of the electronic structure engineering to a more practical level of nanotechnological fabrication.

Design of electrocatalysts for oxygen- and hydrogen-involving energy conversion reactions

The pace of materials discovery for heterogeneous catalysts and electrocatalysts could, in principle, be accelerated by the development of efficient computational screening methods. This would require an integrated approach, where the catalytic activity and stability of new materials are evaluated and where predictions are benchmarked by careful synthesis and experimental tests. In this contribution, we present a density functional theory-based, high-throughput screening scheme that successfully uses these strategies to identify a new electrocatalyst for the hydrogen evolution reaction (HER). The activity of over 700 binary surface alloys is evaluated theoretically; the stability of each alloy in electrochemical environments is also estimated. BiPt is found to have a predicted activity comparable to, or even better than, pure Pt, the archetypical HER catalyst. This alloy is synthesized and tested experimentally and shows improved HER performance compared with pure Pt, in agreement with the computational screening results.

Computational high-throughput screening of electrocatalytic materials for hydrogen evolution

The decay of localized surface plasmons supported by plasmonic metal nanoparticles results in the formation of energetic charge carriers within the nanoparticles. Once formed, these charge carriers can transfer to chemically attached materials where they can perform a function. The efficient extraction and utilization of these charge carriers in various applications hinges on the ability to design plasmonic nanostructures with highly localized charge carrier generation at specific locations in the nanostructure. Herein, we shed light on the physical mechanisms governing the flow of energy in resonantly excited multimetallic plasmonic nanoparticles. We demonstrate that coating plasmonic nanostructures with nonplasmonic metals can result in the preferential dissipation of energy (i.e., formation of charge carriers) in the nonplasmonic metal and that the extent of this dissipation depends heavily on the electronic structure of the constituent metals. We use experimental and modeling studies of various core–s...

Design Principles for Directing Energy and Energetic Charge Flow in Multicomponent Plasmonic Nanostructures

Performing electron-transfer reactions on metal nanoparticles requires separation of charge carriers at the nanoparticle and their transfer to the reacting molecules. Inducing these reactions using...

Chemical Requirement for Extracting Energetic Charge Carriers from Plasmonic Metal Nanoparticles to Perform Electron-Transfer Reactions

Identifying structure-performance relationships is critical for the discovery and optimization of heterogeneous catalysts. Recent theoretical contributions have led to the development of d-band theory, which relates the calculated electronic structure of a metal to its chemical and catalytic activity. While there are many contributions where quantum-chemical calculations have been utilized to validate the d-band theory, experimental examples relating the electronic structures of commercially relevant nonmodel catalysts to their performance are lacking. We show that even small changes in the near-Fermi-level electronic structures of nonmodel supported catalysts, induced by the formation of surface alloys, can be measured and related to the chemical and catalytic performance of these materials. We demonstrate that critical shifts in the d-band center in alloys are related to the formation of new electronic states in response to alloying rather than to charge redistribution among constitutive alloy elements, i.e., the number of d holes and d electrons localized on the constitutive alloy elements is constant. On the basis of the presented results, we provide a simple, physically transparent framework for predicting shifts in the d-band center in response to alloying and relating these shifts to the chemical characteristics of the alloys.

Measuring and relating the electronic structures of nonmodel supported catalytic materials to their performance.

Recent Developments in Nitrogen Reduction Catalysts: A Virtual Issue

Intentional ("on-purpose") propylene production through nonoxidative propane dehydrogenation (PDH) holds great promise for meeting the increasing global demand for propylene. For stable performance, traditional alumina-supported platinum-based catalysts require excess tin and feed dilution with hydrogen; however, this reduces per-pass propylene conversion and thus lowers catalyst productivity. We report that silica-supported platinum-tin (Pt1Sn1) nanoparticles ( 99%). Atomic mixing of Pt and Sn in the precursor is preserved upon reduction and during catalytic operation. The benign interaction of these nanoparticles with the silicon dioxide support does not lead to Pt-Sn segregation and formation of a tin oxide phase that can occur over traditional catalyst supports.

Suljo Linic

Papers

Design Principles for Directing Energy and Energetic Charge Flow in Multicomponent Plasmonic Nanostructures

Chemical Requirement for Extracting Energetic Charge Carriers from Plasmonic Metal Nanoparticles to Perform Electron-Transfer Reactions

Measuring and relating the electronic structures of nonmodel supported catalytic materials to their performance.

Recent Developments in Nitrogen Reduction Catalysts: A Virtual Issue

Stable and selective catalysts for propane dehydrogenation operating at thermodynamic limit