https://www.massey.ac.nz/~ychisti/Biodiesel.pdf

Biodiesel from microalgae.

Sustainability is a key principle in natural resource management, and it involves operational efficiency, minimisation of environmental impact and socio-economic considerations; all of which are interdependent. It has become increasingly obvious that continued reliance on fossil fuel energy resources is unsustainable, owing to both depleting world reserves and the green house gas emissions associated with their use. Therefore, there are vigorous research initiatives aimed at developing alternative renewable and potentially carbon neutral solid, liquid and gaseous biofuels as alternative energy resources. However, alternate energy resources akin to first generation biofuels derived from terrestrial crops such as sugarcane, sugar beet, maize and rapeseed place an enormous strain on world food markets, contribute to water shortages and precipitate the destruction of the world's forests. Second generation biofuels derived from lignocellulosic agriculture and forest residues and from non-food crop feedstocks address some of the above problems; however there is concern over competing land use or required land use changes. Therefore, based on current knowledge and technology projections, third generation biofuels specifically derived from microalgae are considered to be a technically viable alternative energy resource that is devoid of the major drawbacks associated with first and second generation biofuels. Microalgae are photosynthetic microorganisms with simple growing requirements (light, sugars, CO 2 , N, P, and K) that can produce lipids, proteins and carbohydrates in large amounts over short periods of time. These products can be processed into both biofuels and valuable co-products. This study reviewed the technologies underpinning microalgae-to-biofuels systems, focusing on the biomass production, harvesting, conversion technologies, and the extraction of useful co-products. It also reviewed the synergistic coupling of microalgae propagation with carbon sequestration and wastewater treatment potential for mitigation of environmental impacts associated with energy conversion and utilisation. It was found that, whereas there are outstanding issues related to photosynthetic efficiencies and biomass output, microalgae-derived biofuels could progressively substitute a significant proportion of the fossil fuels required to meet the growing energy demand.

/pdf/biofuels-from-microalgae-a-review-of-technologies-for-1t1wwr5e69.pdf

Biofuels from microalgae—A review of technologies for production, processing, and extractions of biofuels and co-products

Microalgae represent an exceptionally diverse but highly specialized group of micro-organisms adapted to various ecological habitats. Many microalgae have the ability to produce substantial amounts (e.g. 20-50% dry cell weight) of triacylglycerols (TAG) as a storage lipid under photo-oxidative stress or other adverse environmental conditions. Fatty acids, the building blocks for TAGs and all other cellular lipids, are synthesized in the chloroplast using a single set of enzymes, of which acetyl CoA carboxylase (ACCase) is key in regulating fatty acid synthesis rates. However, the expression of genes involved in fatty acid synthesis is poorly understood in microalgae. Synthesis and sequestration of TAG into cytosolic lipid bodies appear to be a protective mechanism by which algal cells cope with stress conditions, but little is known about regulation of TAG formation at the molecular and cellular level. While the concept of using microalgae as an alternative and renewable source of lipid-rich biomass feedstock for biofuels has been explored over the past few decades, a scalable, commercially viable system has yet to emerge. Today, the production of algal oil is primarily confined to high-value specialty oils with nutritional value, rather than commodity oils for biofuel. This review provides a brief summary of the current knowledge on oleaginous algae and their fatty acid and TAG biosynthesis, algal model systems and genomic approaches to a better understanding of TAG production, and a historical perspective and path forward for microalgae-based biofuel research and commercialization.

https://onlinelibrary.wiley.com/doi/epdf/10.1111/j.1365-313X.2008.03492.x

Microalgal triacylglycerols as feedstocks for biofuel production: perspectives and advances

The use of fossil fuels is now widely accepted as unsustainable due to depleting resources and the accumulation of greenhouse gases in the environment that have already exceeded the “dangerously high” threshold of 450 ppm CO2-e. To achieve environmental and economic sustainability, fuel production processes are required that are not only renewable, but also capable of sequestering atmospheric CO2. Currently, nearly all renewable energy sources (e.g. hydroelectric, solar, wind, tidal, geothermal) target the electricity market, while fuels make up a much larger share of the global energy demand (∼66%). Biofuels are therefore rapidly being developed. Second generation microalgal systems have the advantage that they can produce a wide range of feedstocks for the production of biodiesel, bioethanol, biomethane and biohydrogen. Biodiesel is currently produced from oil synthesized by conventional fuel crops that harvest the sun’s energy and store it as chemical energy. This presents a route for renewable and carbon-neutral fuel production. However, current supplies from oil crops and animal fats account for only approximately 0.3% of the current demand for transport fuels. Increasing biofuel production on arable land could have severe consequences for global food supply. In contrast, producing biodiesel from algae is widely regarded as one of the most efficient ways of generating biofuels and also appears to represent the only current renewable source of oil that could meet the global demand for transport fuels. The main advantages of second generation microalgal systems are that they: (1) Have a higher photon conversion efficiency (as evidenced by increased biomass yields per hectare): (2) Can be harvested batch-wise nearly all-year-round, providing a reliable and continuous supply of oil: (3) Can utilize salt and waste water streams, thereby greatly reducing freshwater use: (4) Can couple CO2-neutral fuel production with CO2 sequestration: (5) Produce non-toxic and highly biodegradable biofuels. Current limitations exist mainly in the harvesting process and in the supply of CO2 for high efficiency production. This review provides a brief overview of second generation biodiesel production systems using microalgae.

https://www.springer.com/cda/content/document/cda_downloaddocument/BioEnergyResearch_Second+Generation+Biofuels+High-Efficiency+Microalgae+for+Biodiesel+Production.pdf?SGWID=0-0-45-1347846-0

Second generation biofuels: high-efficiency microalgae for biodiesel production

http://www.unece.lsu.edu/biofuels/documents/2008oct/bf08_15.pdf

Biodiesel from microalgae beats bioethanol.

Two species of diatoms were genetically transformed by introducing plasmid vectors containing the Escherichia coli neomycin phosphotransferase II (nptII)gene. Expression of the bacterial nptII gene in the diatoms was achieved using the putative promoter and terminator sequences from the acetyl-CoA carboxylase gene from the centric diatom Cyclotella cryptica T13L Reimann, Lewin, and Guillard. The vectors were introduced into C. cryptica and the pennate diatom Navicula saprophila NAVIC1 Lange-Bertalot and Bonik by microprojectile bombardment. Putative transformants were selected based on their ability to grow in the presence of the antibiotic G418, and production of the neomycin phosphotransferase protein by the transformed cells was confirmed by western blotting. The foreign DNA integrated into one or more random sites within the genome of the transformed algal cells, often in the form of tandem repeats. This is the first report of reproducible, stable genetic transformation of a chlorophyll c-containing alga.

Genetic transformation of the diatoms cyclotella cryptica and navicula saprophila

Genetic transformation of two species of diatoms has been accomplished by introducing chimeric plasmid vectors containing a bacterial antibiotic resistance gene driven by regulatory sequences from the acetyl-CoA carboxylase (ACCase) gene from the diatom Cyclotella cryptica. The recombinant DNA integrated into one or more random sites within the algal genome and the foreign protein was produced by the algal transformants. This is the first report of genetic transformation of any chlorophyll c-containing microalgal strain. We are using this system to introduce additional copies of the ACCase gene into diatoms in an attempt to manipulate lipid accumulation in transformed strains.

Manipulation of microalgal lipid production using genetic engineering

Significant progress has been made toward the successful genetic engineering of microalgal species with high potential for fuel production. Foreign DNA has been transferred into a green alga,Chlorella ellipsoidea, and has been successfully expressed in this heterologous system. In addition, electroporation has shown promise as a means of introducing DNA into intact algal cells. We have analyzed the composition of DNA from several algal species and demonstrated the presence of elevated GC contents in several green algal species. These results suggest that homologous selectable markers may be required for the development of stable transformation systems for the algae; the development of nitrate reductase and orotidine-5′-phosphate decarboxylase as homologous selectable markers forMonoraphidium minutum and forCyclotella cryptica is in progress. We have constructed a cDNA expression library forCyclotella cryptica, and are constructing cDNA and genomic libraries for several other algal species. The libraries will be screened with heterologous or homologous probes for nitrate reductase and acetyl-CoA carboxylase in order to clone these genes, which appear to influence lipid accumulation in the algae. This work represents important steps toward the genetic improvement of micro-algae for fuel production.

Genetic engineering of microalgae for fuel production : scientific note

Total DNA was isolated from 10 species of microalgae, including representatives of the Chlorophyceae (Chlorella ellipsoidea, Chlamydomonas reinhardtii, and Monoraphidium minutum), Bacillariophyceae (Cyclotella cryptica, Navicula saprophila, Nitzschia pusilla, and Phaeodactylum tricornutum), Charophyceae (Stichococcus sp.), Dinophyceae (Crypthecodinium cohnii), and Prasinophyceae (Tetraselmis suecica). Control samples of Escherichia coli and calf thymus DNA were also analyzed. The nucleoside base composition of each DNA sample was determined by reversed-phase high performance liquid chromatography. All samples contained 5-methyldeoxycytidine, although at widely varying levels. In M. minutum, about one-third of the cytidine residues were methylated. Restriction analysis supported this high degree of methylation in M. minutum and suggested that methylation is biased toward 5[prime]-CG dinucleotides. The guanosine + cytosine (GC) contents of the green algae were, with the exception of Stichococcus sp., consistently higher than those of the diatoms. Monoraphidium minutum exhibited an extremely high GC content of 71%. Such a value is rare among eukaryotic organisms and might indicate an unusual codon usage. This work is important for developing strategies for transformation and gene cloning in these algae. 46 refs., 1 fig., 2 tabs.

Terri G. Dunahay

Papers

Genetic transformation of the diatoms cyclotella cryptica and navicula saprophila

Manipulation of microalgal lipid production using genetic engineering

Genetic engineering of microalgae for fuel production : scientific note

DNA nucleoside composition and methylation in several species of microalgae

Transformation of microalgae using silicon carbide whiskers.