A ceramic fuel cell in an all solid-state energy conversion device that produces electricity by electrochemically combining fuel and oxidant gases across an ionic conducting oxide. Current ceramic fuel cells use an oxygen-ion conductor or a proton conductor as the electrolyte and operate at high temperatures (>600°C). Ceramic fuel cells, commonly referred to as solid-oxide fuel cells (SOFCs), are presently under development for a variety of power generation applications. This paper reviews the science and technology of ceramic fuel cells and discusses the critical issues posed by the development of this type of fuel cell. The emphasis is given to the discussion of component materials (especially, ZrO2 electrolyte, nickel/ZrO2 cermet anode, LaMnO3 cathode, and LaCrO3 interconnect), gas reactions at the electrodes, stack designs, and processing techniques used in the fabrication of required ceramic structures.

Ceramic Fuel Cells

Despite being first demonstrated over 160 years ago, and offering significant environmental benefits and high electrical efficiency, it is only in the last two decades that fuel cells have offered a realistic prospect of being commercially viable. The solid oxide fuel cell (SOFC) offers great promise and is presently the subject of intense research activity. Unlike other fuel cells the SOFC is a solid-state device which operates at elevated temperatures. This review discusses the particular issues facing the development of a high temperature solid-state fuel cell and the inorganic materials currently used and under investigation for such cells, together with the problems associated with operating SOFCs on practical hydrocarbon fuels.

/pdf/solid-oxide-fuel-cells-2vfiwiriu1.pdf

Solid oxide fuel cells

Progress in material selection for solid oxide fuel cell technology: A review

Present review is aimed at providing a state-of-art development of anode for solid oxide fuel cell (SOFC) with principal emphasis on the materials aspect. The criteria for the anode of SOFC are first presented. The prospects and problems of the currently developed anode materials are elucidated. In particular, the electrochemical properties of the Ni/YSZ cermet anode that is the most commonly employed in the establishment of SOFC stack is described along with various approaches attempted for their improvements. The advantages and disadvantages of other anode materials are compared to offer some insights for the research and development of new generation of anode materials for SOFC.

A review on the status of anode materials for solid oxide fuel cells

Lanthanum chromite-based materials for solid oxide fuel cell interconnects

This paper summarizes the stress and fracture analyses of a three-layer ceramic composite which is a fundamental building block for the monolithic solid oxide fuel cell currently being developed at Argonne National Laboratory. A small difference in the coefficients of thermal expansion of different layers can result in large stresses and cause cracking parallel to the plane of the layers. A simple fracture model for a three-layer composite has been developed. The cracking behavior predicted by the model is in reasonably good agreement with the fabrication experience to date.

Terry Claar

Papers

Stress and Fracture Behavior of Monolithic Fuel Cell Tapes