The Environmental Protection Agency (EPA) provides access to information on a variety of topics related to the environment and strives to inform citizens of health risks. The EPA also has an extensive library network that consists of 26 libraries throughout the United States, which provide access to a plethora of information to EPA employees, scientists, and researchers. The EPA implemented a reorganization project to digitize their materials so they would be more accessible to a wider range of users, but this plan was drastically accelerated when the EPA was threatened with a budget cut. It chose to close and reduce the hours and services of some of their libraries. As a result, the agency was accused of denying users the “right to know” by making information unavailable, not providing an adequate strategic plan, and discarding vital materials. This case study explores the background of the digitization project, the practices implemented, and the critiques of the project.

/pdf/the-environmental-protection-agency-3gx4opzrjm.pdf

The Environmental Protection Agency

In this paper, three of the leading options for large scale CO2 capture are reviewed from a technical perspective. We consider solvent-based chemisorption techniques, carbonate looping technology, and the so-called oxyfuel process. For each technology option, we give an overview of the technology, listing advantages and disadvantages. Subsequently, a discussion of the level of technological maturity is presented, and we conclude by identifying current gaps in knowledge and suggest areas with significant scope for future work. We then discuss the suitability of using ionic liquids as novel, environmentally benign solvents with which to capture CO2. In addition, we consider alternatives to simply sequestering CO2—we present a discussion on the possibility of recycling captured CO2 and exploiting it as a C1 building block for the sustainable manufacture of polymers, fine chemicals, and liquid fuels. Finally, we present a discussion of relevant systems engineering methodologies in carbon capture system design.

/pdf/an-overview-of-co2-capture-technologies-54l9xz6nfq.pdf

An overview of CO2 capture technologies

http://www.bashanfoundation.org/gmaweb/pdfs/P-removal.pdf

Recent advances in removing phosphorus from wastewater and its future use as fertilizer (1997-2003).

Recent advances in the science and technology of ultra low sulfur diesel (ULSD) production

Global review and synthesis of trends in observed terrestrial near-surface wind speeds; implications for evaporation

For geological sequestration of carbon dioxide (CO2) separated from pulverized coal combustion flue gas, it is necessary to adequately evaluate the potential impacts of flue gas impurities on groundwater aquifers in the case of the CO2 leakage from its storage sites. This study estimated the flue gas impurities to be included in the CO2 stream separated from a CO2 control unit for a different combination of air pollution control devices and different flue gas compositions. Specifically, the levels of acid gases and mercury vapor were estimated for the monoethanolamine (MEA)-based absorption process on the basis of published performance parameters of existing systems. Among the flue gas constituents considered, sulfur dioxide (SO2) is known to have the most adverse impact on MEA absorption. When a flue gas contains 3000 parts per million by volume (ppmv) SO2 and a wet flue gas desulfurization system achieves its 95% removal, approximately 2400 parts per million by weight (ppmw) SO2 could be included in the separated CO2 stream. In addition, the estimated concentration level was reduced to as low as 135 ppmw for the SO2 of less than 10 ppmv in the flue gas entering the MEA unit. Furthermore, heat-stable salt formation could further reduce the SO2 concentration below 40 ppmw in the separated CO2 stream. In this study, it is realized that the formation rates of heat-stable salts in MEA solution are not readily available in the literature and are critical to estimating the levels and compositions of flue gas impurities in sequestered CO2 streams. In addition to SO2, mercury, and other impurities in separated CO2 streams could vary depending on pollutant removal at the power plants and impose potential impacts on groundwater. Such a variation and related process control in the upstream management of carbon separation have implications for groundwater protection at carbon sequestration sites and warrant necessary considerations in overall sequestration planning, engineering, and management.

https://www.tandfonline.com/doi/pdf/10.3155/1047-3289.59.6.725

Potential flue gas impurities in carbon dioxide streams separated from coal-fired power plants.

Diesel-powered equipment is known to emit significant quantities of fine particulate matter to the atmosphere. Numerous organic compounds can be adsorbed onto the surfaces of these inhalable particles, among which polycyclic aromatic hydrocarbons (PAHs) are considered potential occupational carcinogens. Guidelines have been established by various agencies regarding diesel emissions and various control technologies are under development. The purpose of this study is to identify, quantify and compare the organic compounds in diesel particulate matter (DPM) with the diesel fuel and engine oil used in a non-road diesel generator. Approximately 90 organic compounds were quantified (with molecular weight ranging from 120 to 350), which include alkanes, PAHs, alkylated PAHs, alkylbenzenes and alkanoic acids. The low sulfur diesel fuel contains 61% alkanes and 7.1% of PAHs. The identifiable portion of the engine oil contains mainly the alkanoic and benzoic acids. The composition of DPM suggests that they may be originated from unburned diesel fuel, engine oil evaporation and combustion generated products. Compared with diesel fuel, DPM contains fewer fractions of alkanes and more PAH compounds, with the shift toward higher molecular weight ones. The enrichment of compounds with higher molecular weight in DPM may be combustion related (pyrogenic).

The organic composition of diesel particulate matter, diesel fuel and engine oil of a non-road diesel generator

Noncarbonaceous materials or mineral oxides (silica gel, alumina, molecular sieves, zeolites, and montmorillonite) were modified with various functional groups such as amine, amide, thiol, urea, and active additives such as elemental sulfur, sodium sulfide, and sodium polysulfide to examine their potential as sorbents for the removal of elemental mercury (Hg(0)) vapor at coal-fired utility power plants. A number of sorbent candidates such as amine- silica gel, urea- silica gel, thiol- silica gel, amide-silica gel, sulfur-alumina, sulfur-molecular sieve, sulfur-montmorillonite, sodium sulfide-montmorillonite, and sodium polysulfide-montmorillonite, were synthesized and tested in a lab-scale fixed-bed system under an argon flow for screening purposes at 70 degrees C and/or 140 degrees C. Several functionalized silica materials reported in previous studies to effectively control heavy metals in the aqueous phase showed insignificant adsorption capacities for Hg(0) control in the gas phase, suggesting that mercury removal mechanisms in both phases are different. Among elemental sulfur-, sodium sulfide-, and sodium polysulfide-impregnated inorganic samples, sodium polysulfide-impregnated montmorillonite K 10 showed a moderate adsorption capacity at 70 degrees C, which can be used for sorbent injection prior to the wet FGD system.

Development of cost-effective noncarbon sorbents for Hg(0) removal from coal-fired power plants.

Ammonia-treated porous carbon derived from ZIF-8 for enhanced CO2 adsorption

A brominated activated carbon (Darco Hg-LH) and cupric chloride-impregnated activated carbon (CuCl2-ACs) sorbent have been tested in a bench-scale entrained-flow reactor system which was developed ...

Tim C. Keener

Papers

Potential flue gas impurities in carbon dioxide streams separated from coal-fired power plants.

The organic composition of diesel particulate matter, diesel fuel and engine oil of a non-road diesel generator

Development of cost-effective noncarbon sorbents for Hg(0) removal from coal-fired power plants.

Ammonia-treated porous carbon derived from ZIF-8 for enhanced CO2 adsorption

Bench-scale studies of in-duct mercury capture using cupric chloride-impregnated carbons.