1.0. Introduction 4044 2.0. Biomass Chemistry and Growth Rates 4047 2.1. Lignocellulose and Starch-Based Plants 4047 2.2. Triglyceride-Producing Plants 4049 2.3. Algae 4050 2.4. Terpenes and Rubber-Producing Plants 4052 3.0. Biomass Gasification 4052 3.1. Gasification Chemistry 4052 3.2. Gasification Reactors 4054 3.3. Supercritical Gasification 4054 3.4. Solar Gasification 4055 3.5. Gas Conditioning 4055 4.0. Syn-Gas Utilization 4056 4.1. Hydrogen Production by Water−Gas Shift Reaction 4056

/pdf/synthesis-of-transportation-fuels-from-biomass-chemistry-3sckhzoqoz.pdf

Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering.

Pretreatments to enhance the digestibility of lignocellulosic biomass

Pretreatment technologies for an efficient bioethanol production process based on enzymatic hydrolysis: A review

Lignocelluloses are often a major or sometimes the sole components of different waste streams from various industries, forestry, agriculture and municipalities. Hydrolysis of these materials is the first step for either digestion to biogas (methane) or fermentation to ethanol. However, enzymatic hydrolysis of lignocelluloses with no pretreatment is usually not so effective because of high stability of the materials to enzymatic or bacterial attacks. The present work is dedicated to reviewing the methods that have been studied for pretreatment of lignocellulosic wastes for conversion to ethanol or biogas. Effective parameters in pretreatment of lignocelluloses, such as crystallinity, accessible surface area, and protection by lignin and hemicellulose are described first. Then, several pretreatment methods are discussed and their effects on improvement in ethanol and/or biogas production are described. They include milling, irradiation, microwave, steam explosion, ammonia fiber explosion (AFEX), supercritical CO2 and its explosion, alkaline hydrolysis, liquid hot-water pretreatment, organosolv processes, wet oxidation, ozonolysis, dilute- and concentrated-acid hydrolyses, and biological pretreatments.

/pdf/pretreatment-of-lignocellulosic-wastes-to-improve-ethanol-zbwx58h962.pdf

Pretreatment of lignocellulosic wastes to improve ethanol and biogas production: a review.

New transportation fuels are badly needed to reduce our heavy dependence on imported oil and to reduce the release of greenhouse gases that cause global climate change; cellulosic biomass is the only inexpensive resource that can be used for sustainable production of the large volumes of liquid fuels that our transportation sector has historically favored. Furthermore, biological conversion of cellulosic biomass can take advantage of the power of biotechnology to take huge strides toward making biofuels cost competitive. Ethanol production is particularly well suited to marrying this combination of need, resource, and technology. In fact, major advances have already been realized to competitively position cellulosic ethanol with corn ethanol. However, although biotechnology presents important opportunities to achieve very low costs, pretreatment of naturally resistant cellulosic materials is essential if we are to achieve high yields from biological operations; this operation is projected to be the single, most expensive processing step, representing about 20% of the total cost. In addition, pretreatment has pervasive impacts on all other major operations in the overall conversion scheme from choice of feedstock through to size reduction, hydrolysis, and fermentation, and on to product recovery, residue processing, and co-product potential. A number of different pretreatments involving biological, chemical, physical, and thermal approaches have been investigated over the years, but only those that employ chemicals currently offer the high yields and low costs vital to economic success. Among the most promising are pretreatments using dilute acid, sulfur dioxide, near-neutral pH control, ammonia expansion, aqueous ammonia, and lime, with significant differences among the sugar-release patterns. Although projected costs for these options are similar when applied to corn stover, a key need now is to dramatically improve our knowledge of these systems with the goal of advancing pretreatment to substantially reduce costs and to accelerate commercial applications. © 2007 Society of Chemical Industry and John Wiley & Sons, Ltd

Pretreatment: the key to unlocking low-cost cellulosic ethanol

http://www.neotericsint.com/pubs/CAFI%20I%20Economics.pdf

Tim Eggeman

Papers

Process and economic analysis of pretreatment technologies.