http://ieeexplore.ieee.org/iel5/5610941/5624686/05624745.pdf

Power electronics

Impedance-source networks cover the entire spectrum of electric power conversion applications (dc-dc, dc-ac, ac-dc, ac-ac) controlled and modulated by different modulation strategies to generate the desired dc or ac voltage and current at the output. A comprehensive review of various impedance-source-network-based power converters has been covered in a previous paper and main topologies were discussed from an application point of view. Now Part II provides a comprehensive review of the most popular control and modulation strategies for impedance-source network-based power converters/inverters. These methods are compared in terms of theoretical complexity and performance, when applied to the respective switching topologies. Further, this paper provides as a guide and quick reference for researchers and practicing engineers in deciding which control and modulation method to consider for an application in a given topology at a certain power level, switching frequency and demanded dynamic response.

Impedance-Source Networks for Electric Power Conversion Part II: Review of Control and Modulation Techniques

Recently multilevel inverters (MLI) have attracted more attention in research and industry, as they are changing into a viable technology for several applications. The concept of MLI was introduced for high power and high/medium voltage applications as they can provide an effective interface with renewable energy sources. Developing of reduced switch MLI topology has been a rapid research topic since the past decade, which has not been reviewed so far. Therefore, this review article focuses on the different reduced switch MLI topologies under three categories such as symmetric, asymmetric and hybrid configurations. The important knowledge on these topologies is carefully tabulated based on the three categories in the comparison tables to understand the essential parameters of the MLI topologies. These configurations are not only generating higher voltage levels to improve the power quality but also to reduce the passive filter requirements. Also, this review includes a detailed perspective of various modulation techniques and control strategies for MLI topologies. In addition to that, the different performance parameters of MLI and its calculation methods are discussed with appropriate mathematical expression. This review will help in the selection of appropriate MLI topology for FACTS, motor drives and renewable applications.

A comprehensive review on reduced switch multilevel inverter topologies, modulation techniques and applications

Three existing and one extended space vector modulations (SVMs) for the three-phase Z-source/quasi-Z-source inverter (ZSI/qZSI) are investigated. The different switching control patterns, the available maximum shoot-through duty ratio, the maximum voltage stress across the switch versus voltage gain, and efficiency are compared in detail. A total average switch device power taking into account the shoot-through current stress is proposed to evaluate the total stress of power switches. Simulation and experimental results of the prototyped qZSI verify the theoretical analysis. The six parts of shoot-through time intervals will reduce the inductor current ripples, and improve the qZSI efficiency. Also, the maximum voltage stress and total average switch power will benefit from the shoot-through division. However, the division method impacts these performances of qZSI.

Overview of Space Vector Modulations for Three-Phase Z-Source/Quasi-Z-Source Inverters

The current and emerging investigations on Z-source/quasi-Z-source inverters (ZSIs/qZSIs) are presented. The ZSI/qZSI fulfills buck/boost capability in single-stage topology and overcomes the limits of traditional voltage source inverters (VSIs). Hence, high reliablity, high efficiency, and low cost can be achieved. The recently derived impedance networks with improved voltage gain are discussed. The classic and newly proposed modulations and feedback controls for ZSIs/qZSIs are compared. Finally, the emerging applications and trends of ZSIs/qZSIs to photovoltaic (PV) power generation are discussed. This study offers a comprehensive and systematic reference for the future development of the high-performance ZSI/qZSI.

Z-Source\/Quasi-Z-Source Inverters: Derived Networks, Modulations, Controls, and Emerging Applications to Photovoltaic Conversion

A new series parallel switched multilevel dc-link inverter topology

This paper presents a novel space vector pulse width modulation (SVPWM) technique for three phase Z-source inverter. The proposed modified SVPWM has an additional shoot-through state for boosting the dc link voltage of the inverter beside active and zero states. The shoot-through states are evenly assigned to each phase within zero state. So zero voltage period is diminished for generating a shoot-through time, and active states are unchanged. Simulation and experimental results are presented to demonstrate the new features.

A novel space vector PWM for Z-source inverter

Evolutionary computation based multi-objective pole shape optimization of switched reluctance machine

The Selective Harmonic Elimination Pulse-Width Modulation (SHE-PWM) has been an inclusive research area in the field of Power Converters. This technique offers a tight control of the harmonic spectrum of a given voltage waveform generated by a power electronic converter along with a low number of switching transitions. It involves the solution of non-linear transcendental equation sets representing the relation between the amplitude of the fundamental wave, harmonic components and the switching angles. This paper reports solutions to the Selective Harmonic Elimination (SHE) method based on novel usage of Artificial Intelligence (AI) technique such as Genetic algorithm (GA) for single-phase unipolar waveform. This paper uses Matlab GA Toolbox to generate the gate pulse pattern to eliminate the required order of harmonics at any demanded fundamental output voltage.

GA based optimization and critical evaluation SHE methods for three-level inverter

Switched reluctance machines have emerged as an important technology to be deployed in automotive electric drives; they represent a real alternative to conventional electrical machines in automotives. This paper reviews the technology status and trends in switched reluctance machines. It covers the various aspects of modeling, design, simulation, analysis, and control. Finally, it discusses the impact of switched reluctance machines technology on intelligent motion control.

V. Kamaraj

Papers

A new series parallel switched multilevel dc-link inverter topology

A novel space vector PWM for Z-source inverter

Evolutionary computation based multi-objective pole shape optimization of switched reluctance machine

GA based optimization and critical evaluation SHE methods for three-level inverter

Switched reluctance machine in automotive applications — A technology status review