Department of Materials Science, University of Patras, 26504 Rio Patras, Greece, Theoretical and Physical Chemistry Institute, National Hellenic Research Foundation, 48 Vass. Constantinou Avenue, 116 35 Athens, Greece, Institut de Biologie Moleculaire et Cellulaire, UPR9021 CNRS, Immunologie et Chimie Therapeutiques, 67084 Strasbourg, France, and Dipartimento di Scienze Farmaceutiche, Universita di Trieste, Piazzale Europa 1, 34127 Trieste, Italy

Chemistry of Carbon Nanotubes

Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites

Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties

Polymer/carbon nanotube (CNT) composites are expected to have good processability characteristics of the polymer and excellent functional properties of the CNTs. The critical challenge, however, is how to enhance dispersion and alignment of CNTs in the matrix. Here, we review recent progress and advances that have been made on: (a) dispersion of CNTs in a polymer matrix, including optimum blending, in situ polymerization and chemical functionalization; and (b) alignment of CNTs in the matrix enhanced by ex situ techniques, force and magnetic fields, electrospinning and liquid crystalline phase-induced methods. In addition, discussions on mechanical, thermal, electrical, electrochemical, optical and super-hydrophobic properties; and applications of polymer/CNT composites are included. Enhanced dispersion and alignment of CNTs in the polymer matrix will promote and extend the applications and developments of polymer/CNT nanocomposites.

Dispersion and alignment of carbon nanotubes in polymer matrix: A review

Owing to their unique mechanical properties, carbon nanotubes are considered to be ideal candidates for polymer reinforcement. However, a large amount of work must be done in order to realize their full potential. Effective processing of nanotubes and polymers to fabricate new ultra-strong composite materials is still a great challenge. This Review explores the progress that has already been made in the area of mechanical reinforcement of polymers using carbon nanotubes. First, the mechanical properties of carbon nanotubes and the system requirements to maximize reinforcement are discussed. Then, main methods described in the literature to produce and process polymer–nanotube composites are considered and analyzed. After that, mechanical properties of various nanotube–polymer composites prepared by different techniques are critically analyzed and compared. Finally, remaining problems, the achievements so far, and the research that needs to be done in the future are discussed.

Mechanical Reinforcement of Polymers Using Carbon Nanotubes

In this work, multiwalled carbon nanotubes were investigated as potential mechanical reinforcement agents in two hosts, polyvinyl alcohol (PVA) and poly(9-vinyl carbazole) (PVK). It was found that, by adding various concentrations of nanotubes, both Young’s modulus and hardness increased by factors of 1.8 and 1.6 at 1 wt % in PVA and 2.8 and 2.0 at 8 wt % in PVK, in reasonable agreement with the Halpin–Tsai theory. Furthermore, the presence of the nanotubes was found to nucleate crystallization of the PVA. This crystal growth is thought to enhance matrix-nanotube stress transfer. In addition, microscopy studies suggest extremely strong interfacial bonding in the PVA-based composite. This is manifested by the fracture of the polymer rather that the polymer-nanotube interface.

/pdf/morphological-and-mechanical-properties-of-carbon-nanotube-3s4njyjqk0.pdf

Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites

Surface treatment of titanium for adhesive bonding to polymer composites: a review

Poly(methyl methacrylate) (PMMA)-functionalized multiwalled carbon nanotubes are prepared by in situ polymerization. Infrared absorbance studies reveal covalent bonding between polymer strands and the nanotubes. These treated nanotubes are blended with pure PMMA in solution before drop-casting to form composite films. Increases in Young’s modulus, breaking strength, ultimate tensile strength, and toughness of ×1.9, ×4.7, ×4.6, and ×13.7, respectively, are observed on the addition of less than 0.5 wt% of nanotubes. Effective reinforcement is only observed up to a nanotube content of approximately 0.1 vol%. Above this volume fraction, all mechanical parameters tend to fall off, probably due to nanotube aggregation. In addition, scanning electron microscopy (SEM) studies of composite fracture surfaces show a polymer layer coating the nanotubes after film breakage. The fact that the polymer and not the interface fails suggests that functionalization results in an extremely high polymer/nanotube interfacial shear strength.

Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)-Based Composites by the Incorporation of Poly(methyl methacrylate)-Functionalized Nanotubes**

The synergy of the unique properties of carbon nanotubes (CNT) with the remarkable potential of human mesenchymal stem cells (hMSC) provides an exciting opportunity for novel therapeutic modalities. However, little is known about the impact of CNT on hMSC behavior. We report the effect of CNT on hMSC renewal, metabolic activity, and differentiation. Furthermore, we tracked the intracellular movement of CNT through the cytoplasm to a nuclear location and assessed effects on cellular ultra structure.

Carbon nanotubes and mesenchymal stem cells: biocompatibility, proliferation and differentiation.

Heart disease is a major cause of death in the Western world. In the past three decades there has been a number of improvements in artificial devices and surgical techniques for cardiovascular disease; however, there is still a need for novel devices, especially for those individuals who cannot receive conventional therapy. The major disadvantage of current artificial devices lies in the fact that they cannot grow, remodel, or repair in vivo. Tissue engineering offers the possibility of developing a biological substitute material in vitro with the inherent mechanical, chemical, biological, and morphological properties required in vivo, on an individual patient basis. In order to develop a true biological cardiovascular device a dynamic physiological environment needs to be created. One approach that employs the use of a simulated biological environment is a bioreactor in which the in vivo biomechanical and biochemical conditions are created in vitro for functional tissue development. A review of the current state of the art bioreactors for the generation of tissue engineered cardiovascular devices is presented in this study. The effect of the simulated physiological environment of the bioreactor on tissue development is examined with respect to the materials properties of vascular grafts, heart valves, and cardiac muscles developed in these bioreactors. © 2003 Biomedical Engineering Society.
 PAC2003: 8768+z, 8719Hh, 8717Ee, 8719Ff, 8780Rb

Valerie Barron

Papers

Morphological and mechanical properties of carbon-nanotube-reinforced semicrystalline and amorphous polymer composites

Surface treatment of titanium for adhesive bonding to polymer composites: a review

Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)-Based Composites by the Incorporation of Poly(methyl methacrylate)-Functionalized Nanotubes**

Carbon nanotubes and mesenchymal stem cells: biocompatibility, proliferation and differentiation.

Bioreactors for cardiovascular cell and tissue growth: a review.