scispace - formally typeset
Search or ask a question

Showing papers by "Vitalii Sichkovskyi published in 2019"


Journal ArticleDOI
20 Aug 2019
TL;DR: In this article, the spectral and power characteristics of a single-mode InAs/AlGaInAs/InP QD distributed feedback laser operating at 1.5μm were described.
Abstract: With a new generation of quantum dot (QD) optical gain material comprising atom-like features, the fundamental spectral characteristics of laser emission have been improved significantly. We describe the spectral and power characteristics of continuous wave (CW) single-mode InAs/AlGaInAs/InP QD distributed feedback lasers operating at 1.5 μm. Linewidths as narrow as 60 kHz (30 kHz±10 kHz intrinsic linewidth) at 20°C, which broadens to only 280 kHz (80 kHz±10 kHz intrinsic linewidth) at 80°C, have been achieved. The laser exhibits high output powers of 58 mW at 20°C and 26 mW at 80°C with side mode suppression ratios exceeding 50 dB. These record values stem from high uniformity of the QDs and a large dot density. The linewidth was measured by two techniques that confirm each other: delayed self-heterodyne interferometry and optical frequency comb interferometry. A model fits the experimental results well and enables extraction of the bias and temperature dependent α parameter. At 20°C, α is less than 0.5 at threshold and increases to only 0.9 at 150 mA above threshold. The corresponding values at 80°C are 2 and 2.5. These results imply a great potential of QD lasers for the most demanding applications in terms of spectral purity, such as coherent optical communication systems and optical metrology.

39 citations


Journal ArticleDOI
TL;DR: An InP-based tunnel injection quantum dot (QD) laser and a reference quantum dot laser designed to emit at 1.55 µm were grown by molecular beam epitaxy.

7 citations


Proceedings ArticleDOI
04 Mar 2019
TL;DR: MOICANA is targeting to exploit the advantages of the monolithic integrated PICs for the demonstration of large volume single-channel and WDM transmitter modules for data center interconnects, 5G mobile fronthaul and coherent communication applications.
Abstract: The integration of optical sources in Si photonic transceivers has relied so far on externally coupled III-V laser dies within the assembly. These hybrid approaches are however complex and expensive, as there are additional cost-increasing factors coming from the redundant testing of the pre- and post-coupled laser photonic chips. Further optimization of Photonic Integrated Circuits (PICs) cost and performance can be obtained only with radical technology advancements, such as the “holy grail” of Silicon Photonics; the monolithic integration of III-V sources on Si substrates. MOICANA project funded by EU Horizon 2020 framework targets to develop the technological background for the epitaxy of InP Quantum Dots directly on Si by Selective Area Growth with the best-in-class, in terms of losses and temperature sensitivity, in a CMOS fab, i.e. the SiN waveguide technology. In addition, MOICANA will develop the necessary interface for the seamless light transition between the III-V active and the SiN passive part of the circuitry featuring advanced multiplexing functionality and a combination of efficient and broadband fiber coupling. Through this unique platform, MOICANA aims to demonstrate low cost, inherent cooler-less and energy efficient transmitters, attributes stemming directly from the low loss SiN waveguide technology and the QD nature of the laser’s active region. MOICANA is targeting to exploit the advantages of the monolithic integrated PICs for the demonstration of large volume single-channel and WDM transmitter modules for data center interconnects, 5G mobile fronthaul and coherent communication applications.

6 citations


Journal ArticleDOI
TL;DR: In this paper, the growth and characterization of self-assembled InxGa1−xAs quantum dots grown on GaAs (1 0 0 0 ) substrate designed to emit at 10 30

5 citations


Proceedings ArticleDOI
01 Mar 2019
TL;DR: In this paper, a comparison between tunnel-injection InAs and TI-QD laser designs was performed, where the InAs QDs are embedded in InAlGaAs barriers lattice matched to InP.
Abstract: A comparison between QD lasers with and without tunnel-injection QW designs was performed. In both cases, six layers of a QD or TI-QD design were grown by molecular beam epitaxy equipped with group-V valved cracker cells. The InAs QDs are embedded in InAlGaAs barriers lattice matched to InP. The TI-QW consists of InGaAs separated by a thin InAlGaAs tunnel barrier. The lasers were processed into broad area and ridge waveguide lasers. Both laser designs exhibited high modal gain values in the range of 10-15 cm−1 per dot layer. The static and dynamic device properties of the different QD laser designs were measured and compared against each other.

3 citations


Proceedings ArticleDOI
03 Mar 2019
TL;DR: Narrow linewidth InAs/InP QD DFB lasers with linewaiths of less than 50kHz at 20°C which broadens to less than 80kHz at 80°C were demonstrated using delayed self-heterodyne as well as by optical frequency comb interferometry.
Abstract: Narrow linewidth InAs/InP QD DFB lasers with linewidths of less than 50kHz at 20°C which broadens to less than 80kHz at 80°C were demonstrated using delayed self-heterodyne as well as by optical frequency comb interferometry.

2 citations