In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. One of the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference that the modem's transmitter causes to its own receiver. This tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

/pdf/in-band-full-duplex-wireless-challenges-and-opportunities-djlyhtrciu.pdf

In-Band Full-Duplex Wireless: Challenges and Opportunities

This paper discusses the design of a single channel full-duplex wireless transceiver. The design uses a combination of RF and baseband techniques to achieve full-duplexing with minimal effect on link reliability. Experiments on real nodes show the full-duplex prototype achieves median performance that is within 8% of an ideal full-duplexing system. This paper presents Antenna Cancellation, a novel technique for self-interference cancellation. In conjunction with existing RF interference cancellation and digital baseband interference cancellation, antenna cancellation achieves the amount of self-interference cancellation required for full-duplex operation. The paper also discusses potential MAC and network gains with full-duplexing. It suggests ways in which a full-duplex system can solve some important problems with existing wireless systems including hidden terminals, loss of throughput due to congestion, and large end-to-end delays.

/pdf/achieving-single-channel-full-duplex-wireless-communication-3pg630e002.pdf

Achieving single channel, full duplex wireless communication

In-band full-duplex (IBFD) operation has emerged as an attractive solution for increasing the throughput of wireless communication systems and networks. With IBFD, a wireless terminal is allowed to transmit and receive simultaneously in the same frequency band. This tutorial paper reviews the main concepts of IBFD wireless. Because one the biggest practical impediments to IBFD operation is the presence of self-interference, i.e., the interference caused by an IBFD node's own transmissions to its desired receptions, this tutorial surveys a wide range of IBFD self-interference mitigation techniques. Also discussed are numerous other research challenges and opportunities in the design and analysis of IBFD wireless systems.

Future wireless networks are expected to constitute a distributed intelligent wireless communications, sensing, and computing platform, which will have the challenging requirement of interconnecting the physical and digital worlds in a seamless and sustainable manner. Currently, two main factors prevent wireless network operators from building such networks: (1) the lack of control of the wireless environment, whose impact on the radio waves cannot be customized, and (2) the current operation of wireless radios, which consume a lot of power because new signals are generated whenever data has to be transmitted. In this paper, we challenge the usual “more data needs more power and emission of radio waves” status quo, and motivate that future wireless networks necessitate a smart radio environment: a transformative wireless concept, where the environmental objects are coated with artificial thin films of electromagnetic and reconfigurable material (that are referred to as reconfigurable intelligent meta-surfaces), which are capable of sensing the environment and of applying customized transformations to the radio waves. Smart radio environments have the potential to provide future wireless networks with uninterrupted wireless connectivity, and with the capability of transmitting data without generating new signals but recycling existing radio waves. We will discuss, in particular, two major types of reconfigurable intelligent meta-surfaces applied to wireless networks. The first type of meta-surfaces will be embedded into, e.g., walls, and will be directly controlled by the wireless network operators via a software controller in order to shape the radio waves for, e.g., improving the network coverage. The second type of meta-surfaces will be embedded into objects, e.g., smart t-shirts with sensors for health monitoring, and will backscatter the radio waves generated by cellular base stations in order to report their sensed data to mobile phones. These functionalities will enable wireless network operators to offer new services without the emission of additional radio waves, but by recycling those already existing for other purposes. This paper overviews the current research efforts on smart radio environments, the enabling technologies to realize them in practice, the need of new communication-theoretic models for their analysis and design, and the long-term and open research issues to be solved towards their massive deployment. In a nutshell, this paper is focused on discussing how the availability of reconfigurable intelligent meta-surfaces will allow wireless network operators to redesign common and well-known network communication paradigms.

/pdf/smart-radio-environments-empowered-by-reconfigurable-ai-meta-4w4dwv72v2.pdf

Smart radio environments empowered by reconfigurable AI meta-surfaces: an idea whose time has come

Traditionally, interference is considered harmful. Wireless networks strive to avoid scheduling multiple transmissions at the same time in order to prevent interference. This paper adopts the opposite approach; it encourages strategically picked senders to interfere. Instead of forwarding packets, routers forward the interfering signals. The destination leverages network-level information to cancel the interference and recover the signal destined to it. The result is analog network coding because it mixes signals not bits.So, what if wireless routers forward signals instead of packets? Theoretically, such an approach doubles the capacity of the canonical 2-way relay network. Surprisingly, it is also practical. We implement our design using software radios and show that it achieves significantly higher throughput than both traditional wireless routing and prior work on wireless network coding.

/pdf/embracing-wireless-interference-analog-network-coding-1vuvzsncu8.pdf

Embracing wireless interference: analog network coding

This paper proposes COPE, a new architecture for wireless mesh networks. In addition to forwarding packets, routers mix (i.e., code) packets from different sources to increase the information content of each transmission. We show that intelligently mixing packets increases network throughput. Our design is rooted in the theory of network coding. Prior work on network coding is mainly theoretical and focuses on multicast traffic. This paper aims to bridge theory with practice; it addresses the common case of unicast traffic, dynamic and potentially bursty flows, and practical issues facing the integration of network coding in the current network stack. We evaluate our design on a 20-node wireless network, and discuss the results of the first testbed deployment of wireless network coding. The results show that using COPE at the forwarding layer, without modifying routing and higher layers, increases network throughput. The gains vary from a few percent to several folds depending on the traffic pattern, congestion level, and transport protocol.

/pdf/xors-in-the-air-practical-wireless-network-coding-17k31b3st4.pdf

XORs in the air: practical wireless network coding

We are pleased to announce the release of a tool that records detailed measurements of the wireless channel along with received 802.11 packet traces. It runs on a commodity 802.11n NIC, and records Channel State Information (CSI) based on the 802.11 standard. Unlike Receive Signal Strength Indicator (RSSI) values, which merely capture the total power received at the listener, the CSI contains information about the channel between sender and receiver at the level of individual data subcarriers, for each pair of transmit and receive antennas.Our toolkit uses the Intel WiFi Link 5300 wireless NIC with 3 antennas. It works on up-to-date Linux operating systems: in our testbed we use Ubuntu 10.04 LTS with the 2.6.36 kernel. The measurement setup comprises our customized versions of Intel's close-source firmware and open-source iwlwifi wireless driver, userspace tools to enable these measurements, access point functionality for controlling both ends of the link, and Matlab (or Octave) scripts for data analysis. We are releasing the binary of the modified firmware, and the source code to all the other components.

/pdf/tool-release-gathering-802-11n-traces-with-channel-state-2wnfhcqfy3.pdf

Tool release: gathering 802.11n traces with channel state information

This paper proposes COPE, a new architecture for wireless mesh networks. In addition to forwarding packets, routers mix (i.e., code) packets from different sources to increase the information content of each transmission. We show that intelligently mixing packets increases network throughput. Our design is rooted in the theory of network coding. Prior work on network coding is mainly theoretical and focuses on multicast traffic. This paper aims to bridge theory with practice; it addresses the common case of unicast traffic, dynamic and potentially bursty flows, and practical issues facing the integration of network coding in the current network stack. We evaluate our design on a 20-node wireless network, and discuss the results of the first testbed deployment of wireless network coding. The results show that COPE largely increases network throughput. The gains vary from a few percent to several folds depending on the traffic pattern, congestion level, and transport protocol.

/pdf/xors-in-the-air-practical-wireless-network-coding-39etlzp2kc.pdf

RSSI is known to be a fickle indicator of whether a wireless link will work, for many reasons. This greatly complicates operation because it requires testing and adaptation to find the best rate, transmit power or other parameter that is tuned to boost performance. We show that, for the first time, wireless packet delivery can be accurately predicted for commodity 802.11 NICs from only the channel measurements that they provide. Our model uses 802.11n Channel State Information measurements as input to an OFDM receiver model we develop by using the concept of effective SNR. It is simple, easy to deploy, broadly useful, and accurate. It makes packet delivery predictions for 802.11a/g SISO rates and 802.11n MIMO rates, plus choices of transmit power and antennas. We report testbed experiments that show narrow transition regions (

/pdf/predictable-802-11-packet-delivery-from-wireless-channel-2r2rb9i2xd.pdf

Predictable 802.11 packet delivery from wireless channel measurements

A key challenge for smartphone based visual communication over screen-camera links is imperfect frame synchronization. The difficulty arises from frame rate diversity and variability due to camera capability, lighting conditions, and system factors. On the 4 smartphone cameras we tested, the frame rate varies between 8 and 30 frames per second. If the transmit frame rate is too high, the receiver might lose original frames or capture mixed frames, which are normally not decodable. Previous systems simply reduce the effective screen frame rate to be half the camera frame capture rate, to guarantee receiving a decodable frame every other frame. This under-utilizes the transmitter side capacity and is inefficient.We achieve frame synchronization with LightSync, which features in-frame color tracking to decode imperfect frames and a linear erasure code across frames to recover lost frames. LightSync allows smooth communication between the screen and the camera at any combination of the transmit and receive frame rates, as long as the receive rate is at least half the transmit rate. This means that each receiver can scale the decoding performance with its own camera capability. Across several phones, our system can more than double the average throughput compared to previous approaches.

Wenjun Hu

Papers

XORs in the air: practical wireless network coding

Tool release: gathering 802.11n traces with channel state information

XORs in the air: practical wireless network coding

Predictable 802.11 packet delivery from wireless channel measurements

LightSync: unsynchronized visual communication over screen-camera links