On the temperature dependence of photovoltaic module electrical performance: a review of efficiency/ power correlations

https://minds.wisconsin.edu/bitstream/handle/1793/7602/desoto04.pdf?sequence=1

Improvement and validation of a model for photovoltaic array performance

As photovoltaic penetration of the power grid increases, accurate predictions of return on investment require accurate prediction of decreased power output over time. Degradation rates must be known in order to predict power delivery. This article reviews degradation rates of flat-plate terrestrial modules and systems reported in published literature from field testing throughout the last 40 years. Nearly 2000 degradation rates, measured on individual modules or entire systems, have been assembled from the literature, showing a median value of 0·5%/year. The review consists of three parts: a brief historical outline, an analytical summary of degradation rates, and a detailed bibliography partitioned by technology. Copyright © 2011 John Wiley & Sons, Ltd.

/pdf/photovoltaic-degradation-rates-an-analytical-review-a86in1nx10.pdf

Photovoltaic Degradation Rates—an Analytical Review

This document summarizes the equations and applications associated with the photovoltaic array performance model developed at Sandia National Laboratories over the last twelve years. Electrical, thermal, and optical characteristics for photovoltaic modules are included in the model, and the model is designed to use hourly solar resource and meteorological data. The versatility and accuracy of the model has been validated for flat-plate modules (all technologies) and for concentrator modules, as well as for large arrays of modules. Applications include system design and sizing, 'translation' of field performance measurements to standard reporting conditions, system performance optimization, and real-time comparison of measured versus expected system performance.

/pdf/photovoltaic-array-performance-model-1k1w8oqvit.pdf

Photovoltaic array performance model.

Traditional electric power systems are designed in large part to utilize large baseload power plants, with limited ability to rapidly ramp output or reduce output below a certain level. The increase in demand variability created by intermittent sources such as photovoltaic (PV) presents new challenges to increase system flexibility. This paper aims to investigate and emphasize the importance of the grid-connected PV system regarding the intermittent nature of renewable generation, and the characterization of PV generation with regard to grid code compliance. The investigation was conducted to critically review the literature on expected potential problems associated with high penetration levels and islanding prevention methods of grid tied PV. According to the survey, PV grid connection inverters have fairly good performance. They have high conversion efficiency and power factor exceeding 90% for wide operating range, while maintaining current harmonics THD less than 5%. Numerous large-scale projects are currently being commissioned, with more planned for the near future. Prices of both PV and balance of system components (BOS) are decreasing which will lead to further increase in use. The technical requirements from the utility power system side need to be satisfied to ensure the safety of the PV installer and the reliability of the utility grid. Identifying the technical requirements for grid interconnection and solving the interconnect problems such as islanding detection, harmonic distortion requirements and electromagnetic interference are therefore very important issues for widespread application of PV systems. The control circuit also provides sufficient control and protection functions like maximum power tracking, inverter current control and power factor control. Reliability, life span and maintenance needs should be certified through the long-term operation of PV system. Further reduction of cost, size and weight is required for more utilization of PV systems. Using PV inverters with a variable power factor at high penetration levels may increase the number of balanced conditions and subsequently increase the probability of islanding. It is strongly recommended that PV inverters should be operated at unity power factor.

Grid-connected photovoltaic power systems: Technical and potential problems—A review

This document provides an empirically based performance model for grid-connected photovoltaic inverters used for system performance (energy) modeling and for continuous monitoring of inverter performance during system operation. The versatility and accuracy of the model were validated for a variety of both residential and commercial size inverters. Default parameters for the model can be obtained from manufacturers specification sheets, and the accuracy of the model can be further refined using measurements from either well-instrumented field measurements in operational systems or using detailed measurements from a recognized testing laboratory. An initial database of inverter performance parameters was developed based on measurements conducted at Sandia National Laboratories and at laboratories supporting the solar programs of the California Energy Commission.

/pdf/performance-model-for-grid-connected-photovoltaic-inverters-2g6m7ft4et.pdf

Performance Model for Grid-Connected Photovoltaic Inverters

The most relevant basis for designing photovoltaic systems is their annual energy production, which is also the best metric for monitoring their long-term performance. An accurate array performance model based on established testing procedures is required to confidently predict energy available from the array. This model, coupled with the performance characteristics of other balance-of-system components, provides the tool necessary to calculate expected system performance and to compare actual versus expected energy production. Using such a tool, this paper quantifies the effect of the primary factors influencing the DC-energy available from different photovoltaic module technologies, and contrasts these influences with other system-level factors that often result in significantly less AC-energy delivered to the load than the array is capable of providing. Annual as well as seasonal energy production is discussed in the context of both grid-tied and stand-alone photovoltaic systems.

Analysis of factors influencing the annual energy production of photovoltaic systems

The U.S. Department of Energy has supported development of the Solar Advisor Model (SAM) to provide a common platform for evaluation of the solar energy technologies being developed with the support of the Department. This report describes a detailed comparison of performance-model calculations within SAM to actual measured PV system performance in order to evaluate the ability of the models to accurately predict PV system energy production. This was accomplished by using measured meteorological and irradiance data as an input to the models, and then comparing model predictions of solar and PV system parameters to measured values from co-located PV arrays. The submodels within SAM which were examined include four radiation models, three module performance models, and an inverter model. The PVWATTS and PVMod models were also evaluated.

Comparison of PV system performance-model predictions with measured PV system performance

Computer simulation tools used to predict the energy production of photovoltaic systems are needed in order to make informed economic decisions. These tools require input parameters that characterize module performance under various operational and environmental conditions. Depending upon the complexity of the simulation model, the required input parameters can vary from the limited information found on labels affixed to photovoltaic modules to an extensive set of parameters. The required input parameters are normally obtained indoors using a solar simulator or flash tester, or measured outdoors under natural sunlight. This paper compares measured performance parameters for three photovoltaic modules tested outdoors at the National Institute of Standards and Technology (NIST) and Sandia National Laboratories (SNL). Two of the three modules were custom fabricated using monocrystalline and silicon film cells. The third, a commercially available module, utilized triple-junction amorphous silicon cells. The resulting data allow a comparison to be made between performance parameters measured at two laboratories with differing geographical locations and apparatus. This paper describes the apparatus used to collect the experimental data, test procedures utilized, and resulting performance parameters for each of the three modules. Using a computer simulation model, the impact that differences in measured parameters have on predicted more » energy production is quantified. Data presented for each module includes power output at standard rating conditions and the influence of incident angle, air mass, and module temperature on each module's electrical performance. Measurements from the two laboratories are in excellent agreement. The power at standard rating conditions is within 1% for all three modules. Although the magnitude of the individual temperature coefficients varied as much as 17% between the two laboratories, the impact on predicted performance at various temperature levels was minimal, less than 2%. The influence of air mass on the performance of the three modules measured at the laboratories was in excellent agreement. The largest difference in measured results between the two laboratories was noted in the response of the modules to incident angles that exceed 75 deg. « less

/pdf/comparison-of-photovoltaic-module-performance-measurements-4kva2ilhwe.pdf

William E. Boyson

Papers

Photovoltaic array performance model.

Performance Model for Grid-Connected Photovoltaic Inverters

Analysis of factors influencing the annual energy production of photovoltaic systems

Comparison of PV system performance-model predictions with measured PV system performance

Comparison of Photovoltaic Module Performance Measurements