Removal of pharmaceuticals and personal care products (PPCPs) from wastewater: A review.

Presently, solar energy conversion is widely used to generate heat and produce electricity A comparative study on the world energy consumption released by International Energy Agency (IEA) shows that in 2050, solar array installations will supply around 45% of energy demand in the world It was found that solar thermal is getting remarkable popularity in industrial applications Solar thermal is an alternative to generate electricity, process chemicals or even space heating It can be used in food, non-metallic, textile, building, chemical or even business related industries On the other hand, solar electricity is wildly applied in telecommunication, agricultural, water desalination and building industry to operate lights, pumps, engines, fans, refrigerators and water heaters It is very important to apply solar energy for a wide variety of applications and provide energy solutions by modifying the energy proportion, improving energy stability, increasing energy sustainability, conversion reduction and hence enhance the system efficiency The present work aimed to study the solar energy systems utilization in industrial applications and looked into the industrial applications which are more compatible to be integrated with solar energy systems

A review on solar energy use in industries

Power processing systems will be a key factor of future photovoltaic (PV) applications. They will play a central role in transferring, to the load and/or to the grid, the electric power produced by the high-efficiency PV cells of the next generation. In order to come up the expectations related to the use of solar energy for producing electrical energy, such systems must ensure high efficiency, modularity, and, particularly, high reliability. The goal of this paper is to provide an overview of the open problems related to PV power processing systems and to focus the attention of researchers and industries on present and future challenges in this field.

Reliability Issues in Photovoltaic Power Processing Systems

This paper presents a review on the state-of-the-art maximum power point tracking (MPPT) techniques for PV power system applications. The main techniques that will be deliberated are the Perturb and Observe, Incremental Conductance and Hill Climbing. The coverage will also encompass their variations and adaptive forms. In addition, the more recent MPPT approaches using soft computing methods such as Fuzzy Logic Control, Artificial Neural Network and Evolutionary Algorithms are included. Whilst the paper provides as thorough treatment of MPPT at normal (uniform) insolation, its focus will be on the applications of the abovementioned techniques during partial shading conditions. It is envisaged that this review work will be a source of valuable information for PV professionals to keep abreast with the latest progress in this area, as well as for new researchers to get started on MPPT.

A review of maximum power point tracking techniques of PV system for uniform insolation and partial shading condition

Fe-based catalysts for heterogeneous catalytic ozonation of emerging contaminants in water and wastewater

Single-stage grid-connected photovoltaic (PV) systems have advantages such as simple topology, high efficiency, etc. However, since all the control objectives such as the maximum power point tracking (MPPT), synchronization with the utility voltage, and harmonics reduction for output current need to be considered simultaneously, the complexity of the control scheme is much increased. This paper presents the implementation of a single-stage three-phase grid-connected PV system. In addition to realize the aforementioned control objectives, the proposed control can also remarkably improve the stability of the MPPT method with a modified incremental conductance MPPT method. The reactive power compensation for local load is also realized, so as to alleviate grid burden. A DSP is employed to implement the proposed MPPT controller and reactive power compensation unit. Simulation and experimental results show the high stability and high efficiency of this single-stage three-phase grid-connected PV system.

A Single-Stage Three-Phase Grid-Connected Photovoltaic System With Modified MPPT Method and Reactive Power Compensation

Bioaugmentation as a tool to enhance the removal of refractory compound in coke plant wastewater

Single-stage grid-connected photovoltaic (PV) system has advantages such as simple topology, low cost, etc. However, since this kind of system has only one stage of power conversion, all the control objectives need to be considered simultaneously, such as maximum power point tracking (MPPT), synchronization with the utility voltage and harmonics reduction for output current, so that the complexity of control scheme is much increased. This paper presents a modified MPPT strategy, which can remarkably improve the stability of the single-stage grid-connected PV system during rapidly changing process of light intensity, besides realizing the control objectives above. Comparing it with traditional constant-step MPPT strategy, this paper illustrates the improvement of the novel strategy based on PSIM simulation platform. A 300 Wp grid-connected PV system is also established in laboratory to verify the stability of this modified MPPT strategy, in which DSP (TMS320F2407) is employed to implement the proposed MPPT controller. Simulation and experimental results show the high stability and high efficiency of this modified strategy applied in single-stage grid-connected PV system

Modified MPPT strategy applied in single-stage grid-connected photovoltaic system

Global actions under the Paris agreement: Tracing the carbon leakage flow and pursuing countermeasures

This paper presents a high-efficiency stand-alone photovoltaic (PV) lighting system which can provide functional illumination based on high-pressure sodium (HPS) lamp HPS lamp in the system works at very high efficiency with specially designed ballast and ignitor In order to provide a steady-state operating environment for HPS lamp, a DC-DC converter and a DC-AC inverter are also implemented A high frequency also remarkably reduces the size and the operating noise of the ballast Maximum power point tracking (MPPT) technique is also implemented in this system Experimental results will show the performances of the photovoltaic lighting system

http://ieeexplore.ieee.org/iel5/9025/28650/01283223.pdf

Wu Libo

Papers

A Single-Stage Three-Phase Grid-Connected Photovoltaic System With Modified MPPT Method and Reactive Power Compensation

Bioaugmentation as a tool to enhance the removal of refractory compound in coke plant wastewater

Modified MPPT strategy applied in single-stage grid-connected photovoltaic system

Global actions under the Paris agreement: Tracing the carbon leakage flow and pursuing countermeasures

Implementation of a stand-alone photovoltaic lighting system with maximum power point tracking and high pressure sodium lamp