Amorphous alloys were first developed over 40 years ago and found applications as magnetic core or reinforcement added to other materials. The scope of applications is limited due to the small thickness in the region of only tens of microns. The research effort in the past two decades, mainly pioneered by a Japanese- and a US-group of scientists, has substantially relaxed this size constrain. Some bulk metallic glasses can have tensile strength up to 3000 MPa with good corrosion resistance, reasonable toughness, low internal friction and good processability. Bulk metallic glasses are now being used in consumer electronic industries, sporting goods industries, etc. In this paper, the authors reviewed the recent development of new alloy systems of bulk metallic glasses. The properties and processing technologies relevant to the industrial applications of these alloys are also discussed here. The behaviors of bulk metallic glasses under extreme conditions such as high pressure and low temperature are especially addressed in this review. In order that the scope of applications can be broadened, the understanding of the glass-forming criteria is important for the design of new alloy systems and also the processing techniques.

https://www.tcd.ie/Physics/people/Graham.Cross/SF%20Poster%202011/Shek-MaterSciEng04-Bulk%20Metallic%20Glasses.pdf

Bulk metallic glasses

Bulk metallic glasses (BMGs) have been classified according to the atomic size difference, heat of mixing (� H mix ) and period of the constituent elements in the periodic table. The BMGs discovered to date are classified into seven groups on the basis of a previous result by Inoue. The seven groups are as follows: (G-I) ETM/Ln-LTM/BM-Al/Ga, (G-II) ETM/Ln-LTM/BM-Metalloid, (G-III) Al/Ga-LTM/BMMetalloid, (G-IV) IIA-ETM/Ln-LTM/BM, (G-V) LTM/BM-Metalloid, (G-VI) ETM/Ln-LTM/BM and (G-VII) IIA-LTM/BM, where ETM, Ln, LTM, BM and IIA refer to early transition, lanthanide, late transition, group IIIB–IVB and group IIA-group metals, respectively. The main alloying element of ternary G-I, G-V and G-VII, ternary G-II and G-IV, and ternary G-VI BMGs is the largest, intermediate and smallest atomic radius compared to the other alloying elements, respectively. The main alloying element of ternary BMGs belonging to G-I, G-V, G-VI and G

Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying Element

The following article is based on the MRS Medal talk presented by William L. Johnson at the 1998 MRS Fall Meeting on December 2, 1998. The MRS Medal is awarded for a specific outstanding recent discovery or advancement that has a major impact on the progress of a materials-related field. Johnson received the honor for his development of bulk metallic glass-forming alloys, the fundamental understanding of the thermodynamics and kinetics that control glass formation and crystallization of glass-forming liquids, and the application of these materials in engineering.The development of bulk glass-forming metallic alloys has led to interesting advances in the science of liquid metals. This article begins with brief remarks about the history and background of the field, then follows with a discussion of multicomponent glass-forming alloys and deep eutectics, the chemical constitution of these new alloys, and how they differ from metallic glasses of a decade ago or earlier. Recent studies of deeply undercooled liquid alloys and the insights made possible by their exceptional stability with respect to crystallization will then be discussed. Advances in this area will be illustrated by several examples. The article then describes some of the physical and specific mechanical properties of bulk metallic glasses (BMGs), and concludes with some interesting potential applications.The first liquid-metal alloy vitrified by cooling from the molten state to the glass transition was Au-Si, as reported by Duwez at Caltech in 1960. Duwez made this discovery as a result of developing rapid quenching techniques for chilling metallic liquids at very high rates of 105–106 K/s.

https://www.cambridge.org/core/services/aop-cambridge-core/content/view/S0883769400053252

Bulk Glass-Forming Metallic Alloys: Science and Technology

https://pcsmaa.nimte.ac.cn/uploadfiles/site20/201603/20160311101406-4671769547.pdf

A new glass-forming ability criterion for bulk metallic glasses

The elastic properties, elastic models and elastic perspectives of metallic glasses

Formation of bulk metallic glass in quaternary Ti–Zr–Cu–Ni alloys by relatively slow cooling from the melt is reported. Thick strips of metallic glass were obtained by the method of metal mold casting. The glass forming ability of the quaternary alloys exceeds that of binary or ternary alloys containing the same elements due to the complexity of the system. The best glass forming alloys such as Ti34Zr11Cu47Ni8 can be cast to at least 4-mm-thick amorphous strips. The critical cooling rate for glass formation is of the order of 250 K/s or less, at least two orders of magnitude lower than that of the best ternary alloys. The glass transition, crystallization, and melting behavior of the alloys were studied by differential scanning calorimetry. The amorphous alloys exhibit a significant undercooled liquid region between the glass transition and first crystallization event. The glass forming ability of these alloys, as determined by the critical cooling rate, exceeds what is expected based on the reduced glass transition temperature. It is also found that the glass forming ability for alloys of similar reduced glass transition temperature can differ by two orders of magnitude as defined by critical cooling rates. The origins of the difference in glass forming ability of the alloys are discussed. It is found that when large composition redistribution accompanies crystallization, glass formation is enhanced. The excellent glass forming ability of alloys such as Ti34Zr11Cu47Ni8 is a result of simultaneously minimizing the nucleation rate of the competing crystalline phases. The ternary/quaternary Laves phase (MgZn2 type) shows the greatest ease of nucleation and plays a key role in determining the optimum compositions for glass formation.

/pdf/formation-of-ti-zr-cu-ni-bulk-metallic-glasses-7yxdc5exg5.pdf

X. H. Lin

Papers

Formation of Ti–Zr–Cu–Ni bulk metallic glasses