The retention of uranium and europium onto sepiolite investigated by macroscopic, spectroscopic and modeling techniques

Metal organic frameworks (MOFs) have been regarded as robust adsorbents for the adsorptive removal of organic pollutants because of their unique characteristics. However, the application of MOFs in the removal of metals from water is still rare. In this paper, amino-functionalization of Cr-based MOFs MIL-101 are modified through coordination bonding of unsaturated Cr metal centers with the -NH2 group in ethylenediamine (ED), and we demonstrate their excellent performance for the removal of Pb(II) ions from water. The Fourier transform infrared verifies that the ethylenediamine was grafted successfully on MIL-101. Furthermore, the results of X-ray diffraction, scanning electron microscopy, and transmission electron microscopy show that the structure of ED-MIL-101 with an appropriate amount of ED almost does not collapse and retains the original performance of MIL-101. The adsorption capacity of ED-MIL-101, which is more than five times that of MIL-101, is 81.09 mg.g(-1) for Pb(II) ions from aqueous samples. The selectivity coefficients of ED-MIL-101 for Pb(II)/Cu(II), Pb(II)/Zn(II), Pb(II)/Co(II), and Pb(II)/Ni(II) are 6.92, 24.02, 15.69, and 14.53, respectively. The adsorption kinetics of Pb(II) ions shows that the process fits well with a pseudo-second-order model, and the adsorption equilibrium time is only about 30 min. Moreover, the practical application of ED-MIL-101 achieves almost 97.22% removal efficiency for Pb(II) ions. These results indicate that ED-MIL-101 has great potential in selectively removing Pb(II) ions from water environment.

Adsorptive Removal of Pb(II) Ions from Aqueous Samples with Amino-Functionalization of Metal–Organic Frameworks MIL-101(Cr)

In situ stabilization remediation of cadmium (Cd) and lead (Pb) co-contaminated paddy soil using bentonite

Batch investigations on P immobilization from wastewaters and sediment using natural calcium rich sepiolite as a reactive material.

This review deals with adsorption of metal ions, particularly those considered as hazardous, on clays and some inorganic solids and covers the publication years 2000–2013 describing and quantifying the use of isotherms to obtain the adsorption capacities of the solids. The inorganic solids in the review include clays and clay minerals, their modified forms (obtained by treatment with acids and alkalis, organic functionalization, etc.), zeolites, silica gel, soil, river sediment, activated alumina, inorganic polymers, red mud, inorganic oxides, fly ash, etc. The use of two parameter and three parameter linear isotherms are only discussed with a view to obtain quantitative description of adsorptive accumulation and separation of metal ions from aqueous solution on the solids. The extensively used isotherms are those of Freundlich, Langmuir, Dubinin–Radushkevich and Redlich–Peterson. How these isotherms are being used to obtain the adsorption capacities along with their interpretations form the bulk of the review. The review is divided into sections, each describing the use of a particular isotherm. The metal cations receiving immense importance in adsorption studies are As(III)/As(V), Cd(II), Cr(III)/Cr(VI), Cu(II), Co(II), Pb(II), Ni(II), Hg(II), and Zn(II), and the review covers both the cationic and the anionic metal ions. A few other cations such as Mn(II), Fe(III), Se(V), which have not received much attention, are also covered.

Xuefeng Liang

Papers

Sorption of Pb2+ on mercapto functionalized sepiolite.

Cd immobilization and soil quality under Fe–modified biochar in weakly alkaline soil

Single and joint toxicity of polymethyl methacrylate microplastics and As (V) on rapeseed (Brassia campestris L.).

Effects of mercapto-palygorskite on Cd distribution in soil aggregates and Cd accumulation by wheat in Cd contaminated alkaline soil.