Due to their abundance, high strength and stiffness, low weight and biodegradability, nano-scale cellulose fiber materials (e.g., microfibrillated cellulose and bacterial cellulose) serve as promising candidates for bio-nanocomposite production. Such new high-value materials are the subject of continuing research and are commercially interesting in terms of new products from the pulp and paper industry and the agricultural sector. Cellulose nanofibers can be extracted from various plant sources and, although the mechanical separation of plant fibers into smaller elementary constituents has typically required high energy input, chemical and/or enzymatic fiber pre-treatments have been developed to overcome this problem. A challenge associated with using nanocellulose in composites is the lack of compatibility with hydrophobic polymers and various chemical modification methods have been explored in order to address this hurdle. This review summarizes progress in nanocellulose preparation with a particular focus on microfibrillated cellulose and also discusses recent developments in bio-nanocomposite fabrication based on nanocellulose.

Microfibrillated cellulose and new nanocomposite materials: a review

Microfibrillated cellulose - its barrier properties and applications in cellulosic materials: a review.

Production of cellulose nanofibrils: A review of recent advances

Naturally derived cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) are emerging nanomaterials that display high strength, high surface area, and tunable surface chemistry, allowing for controlled interactions with polymers, nanoparticles, small molecules, and biological materials. Industrial production of nanocelluloses is increasing rapidly with several companies already producing on the tons-per-day scale, intensifying the quest for viable products across many sectors. While the hydrophilicity of the nanocellulose interface has posed a challenge to the use of CNCs and CNFs as reinforcing agents in conventional plastics, it is a significant benefit for creating reinforced or structured hydrogel composites (or, when dried, aerogels) exhibiting both mechanical reinforcement and a host of other desirable properties. In this context, this Review describes the quickly growing field of hydrogels and aerogels incorporating nanocelluloses; over 200 references are summarized in comprehensive tables ...

http://pubs.acs.org/doi/pdf/10.1021/acs.chemmater.7b00531

Review of Hydrogels and Aerogels Containing Nanocellulose

Cellulosic nanoparticles with high Young's modu- lus, crystallinity, specific surface area, and aspect ratio can be found in the natural structure of plant fibers. Indeed, lignocel- lulosic fibers consist of semicrystalline cellulose nanofibrils embedded in an amorphous matrix mainly composed of lignin and hemicelluloses. These nanostructures give the mechanical strength to higher plant cells, and are biodegradable, renew- able, resistant, and widely available to produce nanocompo- sites with low density, and improved and controlled mechanical, optical, and barrier properties. Nanoparticles can be extracted from cellulose using a top-down mechanically or chemically assisted deconstructing strategy, and owing to their highly reactive surface ensuing nanomaterials can be chemi- cally modified to tailor their properties for a wide range of applications. This review is limited to cellulose chemically extracted nanocrystals and aims to provide an overview about several aspects that involve this material, including sources, properties, challenges, and perspectives. V C 2014 Wiley Periodi- cals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014, 00, 000-000

https://www.onlinelibrary.wiley.com/doi/pdf/10.1002/polb.23490

Cellulose nanocrystals and related nanocomposites: Review of some properties and challenges

A systematic study of the degree of molecular ordering and swelling of different nanocellulose model films has been conducted. Crystalline cellulose II surfaces were prepared by spin-coating of the precursor cellulose solutions onto oxidized silicon wafers before regeneration in water or by using the Langmuir−Schaefer (LS) technique. Amorphous cellulose films were also prepared by spin-coating of a precursor cellulose solution onto oxidized silicon wafers. Crystalline cellulose I surfaces were prepared by spin-coating wafers with aqueous suspensions of sulfate-stabilized cellulose I nanocrystals and low-charged microfibrillated cellulose (LC-MFC). In addition, a dispersion of high-charged MFC was used for the buildup of polyelectrolyte multilayers with polyetheyleneimine on silica with the aid of the layer-by-layer (LbL) technique. These preparation methods produced smooth thin films on the nanometer scale suitable for X-ray diffraction and swelling measurements. The surface morphology and thickness of th...

Yasuo Hirose

Papers

Nanoscale cellulose films with different crystallinities and mesostructures--their surface properties and interaction with water.