Mix design and properties assessment of Ultra-High-Performance Fibre Reinforced Concrete (UHPFRC)

This paper addresses the development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses are investigated. The modified Andreasen & Andersen particle packing model is utilized to achieve a densely compacted cementitious matrix. Fly ash (FA), ground granulated blast-furnace slag (GGBS) and limestone powder (LP) are used to replace cement, and their effects on the properties of the designed UHPC are analyzed. The results show that the influence of FA, GGBS or LP on the early hydration kinetics of the UHPC is very similar during the initial five days, while the hydration rate of the blends with GGBS is mostly accelerated afterwards. Moreover, the mechanical properties of the mixture with GGBS are superior, compared to that with FA or LP at both 28 and 91 days. Due to the very low water amount and relatively large superplasticizer dosage in UHPC, the pozzolanic reaction of FA is significantly retarded. Additionally, the calculations of the embedded CO2 emission demonstrate that the cement and mineral admixtures are efficiently used in the developed UHPC, which reduce its environmental impact compared to other UHPCs found in the literature.

/pdf/development-of-an-eco-friendly-ultra-high-performance-3fud7qno8j.pdf

Development of an eco-friendly Ultra-High Performance Concrete (UHPC) with efficient cement and mineral admixtures uses

In recent years, an emerging technology termed, “High-Performance Fiber-Reinforced Concrete (HPFRC)” has become popular in the construction industry. The materials used in HPFRC depend on the desired characteristics and the availability of suitable local economic alternative materials. Concrete is a common building material, generally weak in tension, often ridden with cracks due to plastic and drying shrinkage. The introduction of short discrete fibers into the concrete can be used to counteract and prevent the propagation of cracks. Despite an increase in interest to use HPFRC in concrete structures, some doubts still remain regarding the effect of fibers on the properties of concrete. This paper presents the most comprehensive review to date on the mechanical, physical, and durability-related features of concrete. Specifically, this literature review aims to provide a comprehensive review of the mechanism of crack formation and propagation, compressive strength, modulus of elasticity, stress–strain behavior, tensile strength (TS), flexural strength, drying shrinkage, creep, electrical resistance, and chloride migration resistance of HPFRC. In general, the addition of fibers in high-performance concrete has been proven to improve the mechanical properties of concrete, particularly the TS, flexural strength, and ductility performance. Furthermore, incorporation of fibers in concrete results in reductions in the shrinkage and creep deformations of concrete. However, it has been shown that fibers may also have negative effects on some properties of concrete, such as the workability, which get reduced with the addition of steel fibers. The addition of fibers, particularly steel fibers, due to their conductivity leads to a significant reduction in the electrical resistivity of the concrete, and it also results in some reduction in the chloride penetration resistance of the concrete.

High-performance fiber-reinforced concrete: a review

Yen Lei Voo

Papers

Mechanical and permeability properties of the interface between normal concrete substrate and ultra high performance fiber concrete overlay

Evaluation of Bond Strength between Normal Concrete Substrate and Ultra High Performance Fiber Concrete as a Repair Material

Utilization of Ultra-High Performance Fibre Concrete (UHPFC) for Rehabilitation a Review