Garnet-type solid-state electrolytes have attracted extensive attention due to their high ionic conductivity, approaching 1 mS cm-1, excellent environmental stability, and wide electrochemical stability window, from lithium metal to ∼6 V. However, to date, there has been little success in the development of high-performance solid-state batteries using these exceptional materials, the major challenge being the high solid-solid interfacial impedance between the garnet electrolyte and electrode materials. In this work, we effectively address the large interfacial impedance between a lithium metal anode and the garnet electrolyte using ultrathin aluminium oxide (Al2O3) by atomic layer deposition. Li7La2.75Ca0.25Zr1.75Nb0.25O12 (LLCZN) is the garnet composition of choice in this work due to its reduced sintering temperature and increased lithium ion conductivity. A significant decrease of interfacial impedance, from 1,710 Ω cm2 to 1 Ω cm2, was observed at room temperature, effectively negating the lithium metal/garnet interfacial impedance. Experimental and computational results reveal that the oxide coating enables wetting of metallic lithium in contact with the garnet electrolyte surface and the lithiated-alumina interface allows effective lithium ion transport between the lithium metal anode and garnet electrolyte. We also demonstrate a working cell with a lithium metal anode, garnet electrolyte and a high-voltage cathode by applying the newly developed interface chemistry.

Negating interfacial impedance in garnet-based solid-state Li metal batteries

Solid-state electrolytes (SSEs) have emerged as high-priority materials for safe, energy-dense and reversible storage of electrochemical energy in batteries. In this Review, we assess recent progress in the design, synthesis and analysis of SSEs, and identify key failure modes, performance limitations and design concepts for creating SSEs to meet requirements for practical applications. We provide an overview of the development and characteristics of SSEs, followed by analysis of ion transport in the bulk and at interfaces based on different single-valent (Li+, Na+, K+) and multivalent (Mg2+, Zn2+, Ca2+, Al3+) cation carriers of contemporary interest. We analyse the progress in overcoming issues associated with the poor ionic conductivity and high interfacial resistance of inorganic SSEs and the poor oxidative stability and cation transference numbers of polymer SSEs. Perspectives are provided on the design requirements for future generations of SSEs, with a focus on the chemical, geometric, mechanical, electrochemical and interfacial transport features required to accelerate progress towards practical solid-state batteries in which metals are paired with energetic cathode chemistries, including Ni-rich and Li-rich intercalating materials, sustainable organic materials, S8, O2 and CO2. Solid-state batteries based on electrolytes with low or zero vapour pressure provide a promising path towards safe, energy-dense storage of electrical energy. In this Review, we consider the requirements and design rules for solid-state electrolytes based on inorganics, organic polymers and organic–inorganic hybrids.

Designing solid-state electrolytes for safe, energy-dense batteries

All-solid-state lithium batteries (ASSLBs) have the potential to revolutionize battery systems for electric vehicles due to their benefits in safety, energy density, packaging, and operable temperature range. As the key component in ASSLBs, inorganic lithium-ion-based solid-state electrolytes (SSEs) have attracted great interest, and advances in SSEs are vital to deliver the promise of ASSLBs. Herein, a survey of emerging SSEs is presented, and ion-transport mechanisms are briefly discussed. Techniques for increasing the ionic conductivity of SSEs, including substitution and mechanical strain treatment, are highlighted. Recent advances in various classes of SSEs enabled by different preparation methods are described. Then, the issues of chemical stabilities, electrochemical compatibility, and the interfaces between electrodes and SSEs are focused on. A variety of research addressing these issues is outlined accordingly. Given their importance for next-generation battery systems and transportation style, a perspective on the current challenges and opportunities is provided, and suggestions for future research directions for SSEs and ASSLBs are suggested.

Promises, Challenges, and Recent Progress of Inorganic Solid-State Electrolytes for All-Solid-State Lithium Batteries

Among the contenders in the new generation energy storage arena, all-solid-state batteries (ASSBs) have emerged as particularly promising, owing to their potential to exhibit high safety, high energy density and long cycle life. The relatively low conductivity of most solid electrolytes and the often sluggish charge transfer kinetics at the interface between solid electrolyte and electrode layers are considered to be amongst the major challenges facing ASSBs. This review presents an overview of the state of the art in solid lithium and sodium ion conductors, with an emphasis on inorganic materials. The correlations between the composition, structure and conductivity of these solid electrolytes are illustrated and strategies to boost ion conductivity are proposed. In particular, the high grain boundary resistance of solid oxide electrolytes is identified as a challenge. Critical issues of solid electrolytes beyond ion conductivity are also discussed with respect to their potential problems for practical applications. The chemical and electrochemical stabilities of solid electrolytes are discussed, as are chemo-mechanical effects which have been overlooked to some extent. Furthermore, strategies to improve the practical performance of ASSBs, including optimizing the interface between solid electrolytes and electrode materials to improve stability and lower charge transfer resistance are also suggested.

/pdf/new-horizons-for-inorganic-solid-state-ion-conductors-3w5lzxuciv.pdf

New horizons for inorganic solid state ion conductors

Ab initio atomistic modelling reveals that fast ion diffusion in super-ionic conductors is mediated by concerted migration of multiple ions. On the basis of this understanding, a universal strategy for designing fast ion conductors is proposed and demonstrated.…

/pdf/origin-of-fast-ion-diffusion-in-super-ionic-conductors-xf3jfui1a3.pdf

Origin of fast ion diffusion in super-ionic conductors.

The garnet-type Li7La3Zr2O12 (LLZO) belonging to cubic symmetry (space group Ia3d) is considered as one of the most promising solid electrolyte materials for all-solid state lithium ion batteries. In this study, the diffusion coefficient and site occupancy of Li ions within the 3D network structure of the cubic LLZO framework have been investigated using ab initio molecular dynamics calculations. The bulk conductivity at 300 K is estimated to be about 1.06 × 10–4 S cm–1 with an energy barrier of 0.331 eV, in reasonable agreement with experimental results. The complex mechanism for self-diffusion of Li ions can be viewed as a concerted migration governed by two crucial features: (i) the restriction imposed for occupied site-to-site interatomic separation, and (ii) the unstable residence of Li ion at the 24d site, which can serve as the trigger for ion mobility and reconfiguration of surrounding Li neighbors to accommodate the initiated movement. Evidence for Li ordering is also found at low temperature fo...

Concerted Migration Mechanism in the Li Ion Dynamics of Garnet-Type Li7La3Zr2O12

Department of Organic and Polymeric Materials, Tokyo Institute of Technology,2–12–1 Ookayama, Meguro-ku, Tokyo 152–8552, JapanDevelopment of all solid-state Li secondary based on the use of dry polymer or inorganic electrolytes is vital as they will be freeof solvent leakages and improve inﬂammability. However, both are still under development for many years due to low ionicconductivity, poor mechanical property and/or large internal impedance associated to poorly deﬁned interfaces. In this paper, wereport on a preparation and physicochemical property of mesoporous silica (MPS)/Li conductive polyethylene oxide (Li-PEO)-based polymer hybrid electrolytes (MPS+Li-PEO), and electrochemical performance of the Li/MPS+Li-PEO/LiFePO

Yoshihiro Yamamoto

Papers

Concerted Migration Mechanism in the Li Ion Dynamics of Garnet-Type Li7La3Zr2O12

Fabrication and electrochemical performance of lithium polymer battery using mesoporous silica/polymer hybrid electrolyte