Two organolead halide perovskite nanocrystals, CH3NH3PbBr3 and CH3NH3PbI3, were found to efficiently sensitize TiO2 for visible-light conversion in photoelectrochemical cells. When self-assembled on mesoporous TiO2 films, the nanocrystalline perovskites exhibit strong band-gap absorptions as semiconductors. The CH3NH3PbI3-based photocell with spectral sensitivity of up to 800 nm yielded a solar energy conversion efficiency of 3.8%. The CH3NH3PbBr3-based cell showed a high photovoltage of 0.96 V with an external quantum conversion efficiency of 65%.

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

The study of the photophysical properties of organic–metallic lead halide perovskites, which demonstrate excellent photovoltaic performance in devices with electron- and hole-accepting layers, helps to understand their charge photogeneration and recombination mechanism and unravels their potential for other optoelectronic applications. We report surprisingly high photoluminescence (PL) quantum efficiencies, up to 70%, in these solution-processed crystalline films. We find that photoexcitation in the pristine CH3NH3PbI3–xClx perovskite results in free charge carrier formation within 1 ps and that these free charge carriers undergo bimolecular recombination on time scales of 10s to 100s of ns. To exemplify the high luminescence yield of the CH3NH3PbI3–xClx perovskite, we construct and demonstrate the operation of an optically pumped vertical cavity laser comprising a layer of perovskite between a dielectric mirror and evaporated gold top mirrors. These long carrier lifetimes together with exceptionally high...

http://pubs.acs.org/doi/pdf/10.1021/jz5005285

High Photoluminescence Efficiency and Optically Pumped Lasing in Solution-Processed Mixed Halide Perovskite Semiconductors

Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect

The prospects for light-emitting diodes and lasers based on perovskite materials are reviewed. The field of solution-processed semiconductors has made great strides; however, it has yet to enable electrically driven lasers. To achieve this goal, improved materials are required that combine efficient (>50% quantum yield) radiative recombination under high injection, large and balanced charge-carrier mobilities in excess of 10 cm2 V−1 s−1, free-carrier densities greater than 1017 cm−3 and gain coefficients exceeding 104 cm−1. Solid-state perovskites are — in addition to galvanizing the field of solar electricity — showing great promise in photonic sources, and may be the answer to realizing solution-cast laser diodes. Here, we discuss the properties of perovskites that benefit light emission, review recent progress in perovskite electroluminescent diodes and optically pumped lasers, and examine the remaining challenges in achieving continuous-wave and electrically driven lasing.

/pdf/perovskite-photonic-sources-stp0nug912.pdf

Perovskite photonic sources

Organic-inorganic hybrid perovskites have cemented their position as an exceptional class of optoelectronic materials thanks to record photovoltaic efficiencies of 22.1%, as well as promising demonstrations of light-emitting diodes, lasers, and light-emitting transistors. Perovskite materials with photoluminescence quantum yields close to 100% and perovskite light-emitting diodes with external quantum efficiencies of 8% and current efficiencies of 43 cd A(-1) have been achieved. Although perovskite light-emitting devices are yet to become industrially relevant, in merely two years these devices have achieved the brightness and efficiencies that organic light-emitting diodes accomplished in two decades. Further advances will rely decisively on the multitude of compositional, structural variants that enable the formation of lower-dimensionality layered and three-dimensional perovskites, nanostructures, charge-transport materials, and device processing with architectural innovations. Here, the rapid advancements in perovskite light-emitting devices and lasers are reviewed. The key challenges in materials development, device fabrication, operational stability are addressed, and an outlook is presented that will address market viability of perovskite light-emitting devices.

/pdf/perovskite-materials-for-light-emitting-diodes-and-lasers-4it32b32ij.pdf

Perovskite Materials for Light-Emitting Diodes and Lasers.

Thin films of microcrystalline CH3NH3PbX3 (X = halogen) as well as their mixed-halide crystals were fabricated by the spin-coating technique, and their optical properties were investigated. X-ray diffraction investigation revealed that CH3NH3PbBr3 − x
 Cl
 x
 (x = 0–3) were successfully formed on glass substrate self-assembly and oriented with the a-axis. Owing to due to their large exciton binding energy, these materials showed clear exciton absorption and free-exciton emission in the visible region at room temperature. Replacing Br with CI made it possible to control the band structure of these materials. As a result, the peak position of the exciton band shifted continuously towards blue region with increasing the CI content in the films.

Yoshihisa Watanabe

Papers

Optical properties of CH3NH3PbX3 (X = halogen) and their mixed-halide crystals

Effect of oxygen plasma etching on adhesion between polyimide films and metal

Excitons in organic–inorganic hybrid compounds (CnH2n + 1NH3)2PbBr4 (n = 4, 5, 7 and 12)

Optical properties of natural quantum-well compounds (C6H5-CnH2n-NH3)2PbBr4 (n=1–4)

Temperature-dependent time-resolved photoluminescence of (C6H5C2H4NH3)2PbX4 (X = Br and I)