High-performance electromagnetic interference (EMI) shielding materials with ultraflexibility, outstanding mechanical properties, and superior EMI shielding performances are highly desirable for mo

Ultraflexible and Mechanically Strong Double-Layered Aramid Nanofiber-Ti3C2Tx MXene/Silver Nanowire Nanocomposite Papers for High-Performance Electromagnetic Interference Shielding.

Factors affecting thermal conductivities of the polymers and polymer composites: A review

Renewable porous biochar and 2D MXene have attracted significant attention in high-end electromagnetic interference (EMI) shielding fields, due to unique orderly structures and excellent electrical conductivity (σ) value. In this work, the wood-derived porous carbon (WPC) skeleton from natural wood was performed as a template. And excellent conductive and ultra-light 3D MXene aerogel was then constructed to prepare the MXene aerogel/WPC composites, based on highly ordered honeycomb cells inner WPC as a microreactor. Higher carbonization temperature is more conducive to the graphitization degree of natural wood. MXene aerogel/WPC composites achieve the optimal EMI SE value of up to 71.3 dB at density as low as 0.197 g/cm3. Such wall-like “mortar-brick” structures (WPC skeleton as “mortar” and MXene aerogel as “brick”) not only effectively solve the unstable structure problem of MXene aerogel networks, but also greatly prolong the transmission paths of the electromagnetic waves and dissipate the incident electromagnetic waves in the form of heat and electric energy, thereby exhibiting the superior EMI shielding performance. In addition, MXene aerogel/WPC composites also exhibit good anisotropic compressive strength, excellent thermal insulation and flame retardant properties. Such ultra-light, green and efficient multi-functional bio-carbon-based composites have great application potential in the high-end EMI shielding fields of aerospace and national defence industry, etc.

Ultra-light MXene aerogel/wood-derived porous carbon composites with wall-like “mortar/brick” structures for electromagnetic interference shielding

Construction, mechanism and prospective of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: A review

Flexible electromagnetic interference (EMI) shielding materials with excellent thermal conductivities and Joule heating performances are of urgent demand in the communication industry, artificial intelligence, and wearable electronics. In this work, highly conductive silver nanowires (AgNWs) were prepared using the polyol method. Cellulose sheets were then prepared by dissolving natural cotton in a green and efficient NaOH/urea aqueous solution. Finally, multifunctional flexible EMI shielding AgNWs/cellulose films were fabricated based on vacuum-assisted filtration and hot-pressing. AgNWs are evenly embedded in the inner cellulose matrix and overlap with each other to form a 3D network. AgNWs/cellulose films, with a thickness of 44.5 μm, obtain the superior EMI shielding effectiveness of 101 dB, which is the highest value ever reported for shielding materials with the same thickness. In addition, AgNWs/cellulose films present excellent tensile strength (60.7 MPa) and tensile modulus (3.35 GPa), ultrahigh electrical conductivity (σ, 5571 S/cm), and excellent in-plane thermal conductivity coefficient (λ∥, 10.55 W/mK), which can effectively dissipate the heat accumulation. Interestingly, AgNWs/cellulose films also show outstanding Joule heating performances, good stability, and sensitive temperature response at driving voltages, absolutely safe for the human body. Therefore, our fabricated multifunctional flexible AgNWs/cellulose films have broad prospects in the fields of EMI shielding and protection of outdoor large-scale power transformers and wearable electronics.

Multifunctional Flexible Electromagnetic Interference Shielding Silver Nanowires/Cellulose Films with Excellent Thermal Management and Joule Heating Performances.

3D copper nanowires-thermally annealed graphene aerogel (CuNWs-TAGA) framework is firstly prepared by freeze-drying followed by thermal annealing from CuNWs, graphene oxide (GO) and L-ascorbic acid. Epoxy resin is then poured back into the above 3D CuNWs-TAGA framework to fabricate the CuNWs-TAGA/epoxy nanocomposites. CuNWs with average diameter of about 120 nm and length of approximate 10 μm are successfully prepared. When the mass fraction of CuNWs-TAGA is 7.2 wt% (6.0–1.2 wt% CuNWs-TAGA), the thermal conductivity coefficient (λ) value of the CuNWs-TAGA/epoxy nanocomposites reaches the maximum of 0.51 W/mK. Meantime, the CuNWs-TAGA/epoxy nanocomposites exhibit the maximum electromagnetic interference shielding effectiveness (EMI SE) value of 47 dB and electrical conductivity (σ) of 120.8 S/m, ascribed to perfect 3D CuNWs-TAGA conductive network structures. Meanwhile, the corresponding elasticity modulus, hardness, glass transition temperature (Tg) and heat-resistance index (THRI) of the CuNWs-TAGA/epoxy nanocomposites increase to 4.69 GPa, 0.33 GPa, 126.3 °C and 181.7 °C, respectively.

Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework

Yunge Li

Papers

Synchronously improved electromagnetic interference shielding and thermal conductivity for epoxy nanocomposites by constructing 3D copper nanowires/thermally annealed graphene aerogel framework