Additive manufacturing of metallic components – Process, structure and properties

This article reviews published data on the mechanical properties of additively manufactured metallic materials. The additive manufacturing techniques utilized to generate samples covered in this review include powder bed fusion (e.g., EBM, SLM, DMLS) and directed energy deposition (e.g., LENS, EBF3). Although only a limited number of metallic alloy systems are currently available for additive manufacturing (e.g., Ti-6Al-4V, TiAl, stainless steel, Inconel 625/718, and Al-Si-10Mg), the bulk of the published mechanical properties information has been generated on Ti-6Al-4V. However, summary tables for published mechanical properties and/or key figures are included for each of the alloys listed above, grouped by the additive technique used to generate the data. Published values for mechanical properties obtained from hardness, tension/compression, fracture toughness, fatigue crack growth, and high cycle fatigue are included for as-built, heat-treated, and/or HIP conditions, when available. The effects of test...

Metal Additive Manufacturing: A Review of Mechanical Properties

Wire-feed additive manufacturing (AM) is a promising alternative to traditional subtractive manufacturing for fabricating large expensive metal components with complex geometry. The current research focus on wire-feed AM is trying to produce complex-shaped functional metal components with good geometry accuracy, surface finish and material property to meet the demanding requirements from aerospace, automotive and rapid tooling industry. Wire-feed AM processes generally involve high residual stresses and distortions due to the excessive heat input and high deposition rate. The influences of process conditions, such as energy input, wire-feed rate, welding speed, deposition pattern and deposition sequences, etc., on thermal history and resultant residual stresses of AM-processed components needs to be further understood. In addition, poor accuracy and surface finish of the process limit the applications of wire-feed AM technology. In this paper, after an introduction of various wire-feed AM technologies and its characteristics, an in depth review of various process aspects of wire-feed AM, including quality and accuracy of wire-feed AM processed components, will be presented. The overall objective is to identify the current challenges for wire-feed AM as well as point out the future research direction.

Wire-feed additive manufacturing of metal components: technologies, developments and future interests

Since its conception during the 80s, 3D-printing, also known as additive manufacturing, has been receiving unprecedented levels of attention and interest from industry and research laboratories. This is in addition to end users, who have benefited from the pervasiveness of desktop-size and relatively cheap printing machines available. 3D-printing enables almost infinite possibilities for rapid prototyping. Therefore, it has been considered for applications in numerous research fields, ranging from mechanical engineering, medicine, and materials science to chemistry. Electrochemistry is another branch of science that can certainly benefit from 3D-printing technologies, paving the way for the design and fabrication of cheaper, higher performing, and ubiquitously available electrochemical devices. Here, we aim to provide a general overview of the most commonly available 3D-printing methods along with a review of recent electrochemistry related studies adopting 3D-printing as a possible rapid prototyping fabrication tool.

/pdf/3d-printing-technologies-for-electrochemical-applications-134h7xxorm.pdf

3D-printing technologies for electrochemical applications

A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement

Although an automated flexible production cell is an intriguing prospect for small to median enterprises (SMEs) in current global market conditions, the complexity of programming remains one of the major hurdles preventing automation using industrial robots for SMEs. This paper provides a comprehensive review of the recent research progresses on the programming methods for industrial robots, including online programming, offline programming (OLP), and programming using Augmented Reality (AR). With the development of more powerful 3D CAD/PLM software, computer vision, sensor technology, etc. new programming methods suitable for SMEs are expected to grow in years to come.

/pdf/review-recent-progress-on-programming-methods-for-industrial-328gr3a9o6.pdf

Review: Recent progress on programming methods for industrial robots

Wire and arc additive manufacturing (WAAM) is a promising alternative to traditional subtractive manufacturing for fabricating large aerospace components that feature high buy-to-fly ratio. Since the WAAM process builds up a part with complex geometry through the deposition of weld beads on a layer-by-layer basis, it is important to model the geometry of a single weld bead as well as the multi-bead overlapping process in order to achieve high surface quality and dimensional accuracy of the fabricated parts. This study firstly builds models for a single weld bead through various curve fitting methods. The experimental results show that both parabola and cosine functions accurately represent the bead profile. The overlapping principle is then detailed to model the geometry of multiple beads overlapping together. The tangent overlapping model (TOM) is established and the concept of the critical centre distance for stable multi-bead overlapping processes is presented. The proposed TOM is shown to provide a much better approximation to the experimental measurements when compared with the traditional flat-top overlapping model (FOM). This is critical in process planning to achieve better geometry accuracy and material efficiency in additive manufacturing. Single weld bead models are built through various curve fitting methods.A novel multi-bead overlapping model is established.The concept of the critical centre distance for stable multi-bead overlapping processes is presented.

/pdf/a-multi-bead-overlapping-model-for-robotic-wire-and-arc-174pe17941.pdf

A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)

Chatter analysis of robotic machining process

Although an automated flexible production cell is an intriguing prospect for small to median enterprises (SMEs) in current global market conditions, the complexity of programming remains one of the major hurdles preventing automation using industrial robots for SMEs. This paper provides a comprehensive review of the recent research progresses on the programming methods for industrial robots, including online programming, offline programming (OLP), and programming using Augmented Reality (AR). With the development of more powerful 3D CAD/PLM software, computer vision, sensor technology, etc, new programming methods suitable for SMEs are expected to grow in years to come.

Zengxi Pan

Papers

Wire-feed additive manufacturing of metal components: technologies, developments and future interests

Review: Recent progress on programming methods for industrial robots

A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)

Chatter analysis of robotic machining process

Recent progress on programming methods for industrial robots