A most critical and important issue surrounding the design of automatic control systems with the successively increasing complexity is guaranteeing a high system performance over a wide operating range and meeting the requirements on system reliability and dependability. As one of the key technologies for the problem solutions, advanced fault detection and identification (FDI) technology is receiving considerable attention. The objective of this book is to introduce basic model-based FDI schemes, advanced analysis and design algorithms and the needed mathematical and control theory tools at a level for graduate students and researchers as well as for engineers.

Model-based Fault Diagnosis Techniques: Design Schemes, Algorithms, and Tools

Direct adaptive-state feedback control schemes are developed for linear time-invariant plants with actuator failures with characterizations that some of the plant inputs are stuck at some fixed or varying values which cannot be influenced by control action. Conditions and controller structures for achieving plant-model state matching in the presence of actuator failures are derived. Adaptive laws are designed for updating the controller parameters when both the plant parameters and actuator-failure parameters are unknown. Closed-loop stability and asymptotic-state tracking are ensured. Simulation results show that desired system performance is achieved with the developed adaptive actuator failure compensation control designs.

Adaptive state feedback and tracking control of systems with actuator failures

This paper presents a robust fault diagnosis scheme for abrupt and incipient faults in nonlinear uncertain dynamic systems. A detection and approximation estimator is used for online health monitoring. Once a fault is detected, a bank of isolation estimators is activated for the purpose of fault isolation. A key design issue of the proposed fault isolation scheme is the adaptive residual threshold associated with each isolation estimator. A fault that has occurred can be isolated if the residual associated with the matched isolation estimator remains below its corresponding adaptive threshold, whereas at least one of the components of the residuals associated with all the other estimators exceeds its threshold at some finite time. Based on the class of nonlinear uncertain systems under consideration, an isolation decision scheme is devised and fault isolability conditions are given, characterizing the class of nonlinear faults that are isolable by the robust fault isolation scheme. The nonconservativeness of the fault isolability conditions is illustrated by deriving a subclass of nonlinear systems and of faults for which these conditions are also necessary for fault isolability. Moreover, the analysis of the proposed fault isolation scheme provides rigorous analytical results concerning the fault isolation time. Two simulation examples are given to show the effectiveness of the fault diagnosis methodology.

/pdf/a-robust-detection-and-isolation-scheme-for-abrupt-and-2czu0guwgr.pdf

A robust detection and isolation scheme for abrupt and incipient faults in nonlinear systems

This paper presents a unified methodology for detecting, isolating and accommodating faults in a class of nonlinear dynamic systems. A fault diagnosis component is used for fault detection and isolation. On the basis of the fault information obtained by the fault-diagnosis procedure, a fault-tolerant control component is designed to compensate for the effects of faults. In the presence of a fault, a nominal controller guarantees the boundedness of all the system signals until the fault is detected. Then the controller is reconfigured after fault detection and also after fault isolation, to improve the control performance by using the fault information generated by the diagnosis module. Under certain assumptions, the stability of the closed-loop system is rigorously investigated. It is shown that the system signals remain bounded and the output tracking error converges to a neighborhood of zero.

/pdf/adaptive-fault-tolerant-control-of-nonlinear-uncertain-f9h4q1dufi.pdf

Zhen J. Huang

Papers

Brief paper: On the use of adaptive updating rules for actuator and sensor fault diagnosis