Based on the concept of band bending at metal/semiconductor interfaces as an energy filter for electrons, we present a theory for the enhancement of the thermoelectric properties of semiconductor materials with metallic nanoinclusions. We show that the Seebeck coefficient can be significantly increased due to a strongly energy-dependent electronic scattering time. By including phonon scattering, we find that the enhancement of $ZT$ due to electron scattering is important for high doping, while at low doping it is primarily due to a decrease in the phonon thermal conductivity.

/pdf/theory-of-enhancement-of-thermoelectric-properties-of-2rvreb7dv1.pdf

Theory of enhancement of thermoelectric properties of materials with nanoinclusions.

Radiative sky cooling cools an object on the earth by emitting thermal infrared radiation to the cold universe through the atmospheric window (8–13 μm). It consumes no electricity and has great potential to be explored for cooling of buildings, vehicles, solar cells, and even thermal power plants. Radiative sky cooling has been explored in the past few decades but limited to nighttime use only. Very recently, owing to the progress in nanophotonics and metamaterials, daytime radiative sky cooling to achieve subambient temperatures under direct sunlight has been experimentally demonstrated. More excitingly, the manufacturing of the daytime radiative sky cooling material by the roll-to-roll process makes large-scale deployment of the technology possible. This work reviews the fundamental principles of radiative sky cooling as well as the recent advances, from both materials and systems point of view. Potential applications in different scenarios are reviewed with special attention to technology viability and benefits. As the energy situation and environmental issues become more and more severe in the 21st century, radiative sky cooling can be explored for energy saving in buildings and vehicles, mitigating the urban heat island effect, resolving water and environmental issues, achieving more efficient power generation, and even fighting against the global warming problem.

Radiative sky cooling: Fundamental principles, materials, and applications

Harvesting heat from the environment into electricity has the potential to power Internet-of-things (IoT) sensors, freeing them from cables or batteries and thus making them especially useful for wearable devices. We demonstrate a giant positive thermopower of 17.0 millivolts per degree Kelvin in a flexible, quasi-solid-state, ionic thermoelectric material using synergistic thermodiffusion and thermogalvanic effects. The ionic thermoelectric material is a gelatin matrix modulated with ion providers (KCl, NaCl, and KNO3) for thermodiffusion effect and a redox couple [Fe(CN)64–/Fe(CN)63–] for thermogalvanic effect. A proof-of-concept wearable device consisting of 25 unipolar elements generated more than 2 volts and a peak power of 5 microwatts using body heat. This ionic gelatin shows promise for environmental heat-to-electric energy conversion using ions as energy carriers.

/pdf/giant-thermopower-of-ionic-gelatin-near-room-temperature-235mxecp5p.pdf

Giant thermopower of ionic gelatin near room temperature.

All-day passive radiative cooling has recently attracted tremendous interest by reflecting sunlight and radiating heat to the ultracold outer space. While some progress has been made, it still remains big challenge in fabricating highly efficient and low-cost radiative coolers for all-day and all-climates. Herein, we report a hierarchically structured polymethyl methacrylate (PMMA) film with a micropore array combined with random nanopores for highly efficient day- and nighttime passive radiative cooling. This hierarchically porous array PMMA film exhibits sufficiently high solar reflectance (0.95) and superior longwave infrared thermal emittance (0.98) and realizes subambient cooling of ~8.2 °C during the night and ~6.0 °C to ~8.9 °C during midday with an average cooling power of ~85 W/m2 under solar intensity of ~900 W/m2, and promisingly ~5.5 °C even under solar intensity of ~930 W/m2 and relative humidity of ~64% in hot and moist climate. The micropores and nanopores in the polymer film play crucial roles in enhancing the solar reflectance and thermal emittance. There still remains a big challenge in fabricating highly efficient and low-cost radiative coolers for all-day and all-climates. Here, the authors report a hierarchically structured polymethyl methacrylate film with a micropore array combined with random nanopores for highly efficient day- and nighttime passive radiative cooling.

/pdf/a-structural-polymer-for-highly-efficient-all-day-passive-y5qkxmtfwg.pdf

A structural polymer for highly efficient all-day passive radiative cooling.

Efficient radiative cooling coating with biomimetic human skin wrinkle structure

A novel self-powering ultrathin TEG device based on micro/nano emitter for radiative cooling

Thermoelectric converter: Strategies from materials to device application

https://onlinelibrary.wiley.com/doi/epdf/10.1002/aelm.201900735

Lattice Strain Enhances Thermoelectric Properties in Sb2Te3/Te Heterostructure

Multilayer structure is one of the research focuses of thermoelectric (TE) material in recent years. In this work, n-type 800 nm Bi2Te3/(Pt, Au) multilayers are designed with p-type Sb2Te3 legs to fabricate ultrathin microelectromechanical systems (MEMS) TE devices. The power factor of the annealed Bi2Te3/Pt multilayer reaches 46.5 μW cm−1 K−2 at 303 K, which corresponds to more than a 350% enhancement when compared to pristine Bi2Te3. The annealed Bi2Te3/Au multilayers have a lower power factor than pristine Bi2Te3. The power of the device with Sb2Te3 and Bi2Te3/Pt multilayers measures 20.9 nW at 463 K and the calculated maximum output power reaches 10.5 nW, which is 39.5% higher than the device based on Sb2Te3 and Bi2Te3, and 96.7% higher than the Sb2Te3 and Bi2Te3/Au multilayers one. This work can provide an opportunity to improve TE properties by using multilayer structures and novel ultrathin MEMS TE devices in a wide variety of applications.

/pdf/ultrathin-mems-thermoelectric-generator-with-bi2te3-pt-au-5felsq6t79.pdf

Zhenhua Wu

Papers

A novel self-powering ultrathin TEG device based on micro/nano emitter for radiative cooling

Thermoelectric converter: Strategies from materials to device application

Lattice Strain Enhances Thermoelectric Properties in Sb2Te3/Te Heterostructure

Ultrathin MEMS thermoelectric generator with Bi2Te3/(Pt, Au) multilayers and Sb2Te3 legs.

Nanoporous (00l)-oriented Bi2Te3 nanoplate film for improved thermoelectric performance