Showing papers in "International Journal of Electrochemical Science in 2007"

TL;DR: In this article, a review of electrochemical and non-decreasing techniques from the point of view of corrosion assessment and their applications to bridges, buildings and other civil engineering structures is presented.

TL;DR: In this article, the authors studied the temperature effects on mild steel corrosion in 2.0M of HCl and H2SO4 in the absence and presence of aqueous extract for fenugreek leaves (AEFL).

TL;DR: In this paper, a biodegradable gel polymer electrolyte was prepared using Poly(ε-caprolactone) as a polymer host and its electrochemical performance was evaluated.

TL;DR: In this article, the electrochemical behavior of ascorbic acid (AA) at a chemically modified electrode prepared by incorporating 2, 7-bis (ferrocenyl ethynyl) fluoren-9-one (2, 7)-BFEFO) into carbon paste matrix was investigated.

TL;DR: In this paper, a short literature review on alternative catalysts for the cathodic oxygen reduction in acid (H2SO4) and polymer electrolyte membrane fuel cell (PEMFC) with special emphasis on pyrolyzed macrocycles and precursor materials from metals, organic molecules and N-containing elements has been conducted.

TL;DR: In this article, the authors proposed a low-cost low-complexity fuel cell (LTSOFC) using perovskite oxides as cathode material, which can still maintain the SOFC advantages at an extremely low cost level, exhibiting great market potential.

TL;DR: In this paper, a polyglycine modified electrode was used to simultaneous electrochemical detection of hydroquinone (HQ) and catechol (CC) and showed an excellent electrocatalytical effect on the oxidation of HQ and CC by cyclic voltammetry.

TL;DR: In this paper, the analytical response of daunomycin, an effective drug used for cancer chemotherapy, at different types of electrodes was investigated, and it was shown that the gold/bismuth electrode has a great linear calibration range of dauphin, whereas the linear range at the hanging mercury drop electrode is surprisingly limited.

TL;DR: In this article, the growth mechanism of poly (o-anisidine) (POA) with supporting electrolyte H2SO4 and HCL on platinum (Pt) substrate has been investigated.

TL;DR: In this article, the electrochemically synthesized polypyrrole-polyvinyl Sulphonate (Ppy-PVS), poly(N-methylpyrdrug) polyvinyl sulphonate and poly(P(NMP)-PVS) films on indium tin oxide (ITO) coated glass electrode have been investigated by galvanostatic method.

TL;DR: In this paper, a sensitive sensor for the determination of hydrogen peroxide was fabricated based on the enhanced response of the analyte at glassy carbon surfaces modified by a film of Co(II) hexacyanoferrate.

TL;DR: In this paper, the effects of Mg on supported bilayer lipid membrane (s-BLM) during membrane formation were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS).

TL;DR: In this paper, the effect of PtO on the Arsenic (III) oxidation has been investigated using linear sweep Voltammetry (LSV) and the PtO layer blocks the available surface area for the As(III) reaction.

TL;DR: In this paper, the effects of sulfur addition in the range of 0.003-0.01wt.% on the corrosion resistance, electrochemical properties and gas evolution of Pb-Sb-As-S alloy in sulfuric acid solution were investigated by Linear sweep voltammetry, cyclic voltammetric, weight loss measurements and electrochemical impedance spectroscopy, chronoamperometry and scanning electron microscopy at room temperature.

TL;DR: In this article, identical voltammetry is observed at an unmodified glassy carbon (GC) electrode that has been oxidatively pre-treated in an identical fashion to that reported by Uchiyama et al. but in the absence of ammonium carbamate and any other sources of nitrogen.

TL;DR: Bautista et al. as discussed by the authors proposed a methodology for postgraduates at the Universidad Autonoma de Tlaxcala (UPAEP) in Puebla, Mexico.