scispace - formally typeset
Journal ArticleDOI

Application of infrared spectroscopy to monitoring gas insulated high-voltage equipment: electrode material-dependent SF6 decomposition

R. Kurte, +3 more
- 13 Apr 2002 - 
- Vol. 373, Iss: 7, pp 639-646
Reads0
Chats0
TLDR
Infrared spectroscopy was used for the analysis of gaseous by-products generated from electrical discharges in sulfur hexafluoride gas and emphasis was placed on main decomposition products, such as SOF2, SOF4, and SO2F2.
Abstract
Sulfur hexafluoride is a chemically inert gas which is used in gas insulated substations (GIS) and other high-voltage equipment, leading to a significant enhancement of apparatus lifetime and reductions in installation size and maintenance requirements compared to conventional air insulated substations. However, component failures due to aging of the gas through electrical discharges may occur, and on-site monitoring for risk assessment is needed. Infrared spectroscopy was used for the analysis of gaseous by-products generated from electrical discharges in sulfur hexafluoride gas. An infrared monitoring system was developed using a micro-cell coupled to an FTIR spectrometer by silver halide fibers. Partial least-squares calibration was applied by using a limited number of optimally selected spectral variables. Emphasis was placed on the determination of main decomposition products, such as SOF2, SOF4, and SO2F2. Besides the different electrical conditions, the material of the plane counter electrode of the discharge chamber was also varied between silver, aluminum, copper, tungsten, or tungsten/copper alloy. For the spark experiments the point electrode was the same material as chosen for the plane electrode, whereas for partial discharges a stainless steel needle was employed. Complementary investigations on the chemical composition within the solid counter electrode material by secondary neutral mass spectrometry (SNMS) were also carried out. Under sparking conditions, the electrode material plays an important role in the decomposition rates of the gas-phase, but no relevant material dependence could be observed under partial discharge conditions.

read more

Citations
More filters
Journal ArticleDOI

Decomposition characteristics of SF 6 under thermal fault for temperatures below 400°C

TL;DR: In this paper, the authors explore the decomposition characteristics of SF6 under thermal fault, which can further improve the method of using SF6 decomposed components to diagnose inner insulation status of SF 6 insulated equipment.
Journal ArticleDOI

FTIR Spectroscopy of the Atmosphere Part 2. Applications

TL;DR: In this article, the results of the most significant and frequent applications of FTIR spectroscopy to the study of the atmosphere are summarized, and the possibilities of techniques applied in this field, the extractive and open path measurement methods, and in situ IR absorption measurements such as remote sensing using the sun, the sky, or natural hot objects as IR sources of radiation are discussed.
Journal ArticleDOI

Analysis of PD-generated SF/sub 6/ decomposition gases adsorbed on carbon nanotubes

TL;DR: In this paper, two kinds of experiments were conducted in order to identify the responsible decomposition gas species, which were responsible for the CNT gas sensor response, have not been identified yet.
Journal ArticleDOI

Fourier transform infrared spectroscopy quantitative analysis of SF6 partial discharge decomposition components.

TL;DR: Gas-insulated switchgear (GIS) internal SF6 gas produces specific decomposition components under partial discharge (PD) that can be detected effectively and information as the type and level of GIS internal insulation deterioration can be obtained effectively, and the status of Gis internal insulation can be evaluated.
Journal ArticleDOI

Application of flower-like ZnO nanorods Gas sensor detecting SF 6 decomposition products

TL;DR: In this paper, a novel gas sensor based on flower-like ZnO nanorods was proposed to detect typical sulfur hexafluoride gas (SF6) decompositions.
Related Papers (5)