Optimization Stacker Reclaimer Slewing Bearing Assessment in Mechanical Inspection Combining with Advance Technology of Vibration Analysis

The main scientific goal of the article is to modernize the methods of designing the rotating mechanisms of working machines (excavators, cranes, backhoe loaders, loaders) and other devices (wind turbines, radars, radio telescopes, drilling machines, wastewater treatment plants) in which the construction of the rotate node uses slewing bearings. In this article, the research will focus on how to mount the bearing to the machine. The calculations will be carried out by numerical modelling of bearings and support structures of machines using the finite element method with the wide use of non-linear FEM techniques and taking into account the elastic-plastic state of deformation in the contact zone. In the research, the ADINA program will be used as the basic numerical calculation tool.

Analysis of the influence of slewing bearing mounting on their static load capacity

During the operation, a slewing bearing is always subjected to a set of combined loads. It is the source of deformation of ball-raceway contacts, rings, and even supporting structures. In practice, deformation of rings and supporting structures is often neglected for simplification, that is, they are supposed to be ideally stiff. To take elasticity of rings and supporting (fixed) structures into consideration, the finite-element method (FEM) is applied. In slewing bearings, a great number of contact pairs are present on the contact surfaces between the rolling ele-ments and raceways of the bearing. In order to improve the computational efficiency of load distribution of large roller slewing bearing, a computa-tional model using one-dimensional finite elements (nonlinear elements) is presented in this paper. In this model, each roller is simulated by a group of nonlinear elements truss, which has the same load-deformation perfor-mance with solid roller-raceway contacts. The results show that a group of parallel springs can be used to replace the solid roller and simulate the line contact performance between the roller and raceway. Obtained results are presented as graphs.

/pdf/modelling-of-roller-raceway-contacts-in-the-slewing-bearing-2wmhxb662a.pdf

Optimization Stacker Reclaimer Slewing Bearing Assessment in Mechanical Inspection Combining with Advance Technology of Vibration Analysis

References

Analysis of the influence of slewing bearing mounting on their static load capacity

Modelling of Roller-raceway Contacts in the Slewing Bearing Taking into Account Asymmetrical Load Transfer Through a Roller