Patent
Precision finishing process for spur wheel gear clamped on workpiece spindle
Reads0
Chats0
TLDR
In this article, a rotary mounted honing gearwheel is aligned with the same or a second trueing gear wheel clamped coaxially on the workpiece spindle, which can be set up radially to a first axis and offset at an angle about this axis.Abstract:
After the workpiece such as spur-wheel gear (26) has been polished, the grinding worm (10) is brought out of engagement with the workpiece. A honing gearwheel (18) is brought into engagement with the workpiece in the same step and at the same pressure. The honing gearwheel is aligned with the same or a second trueing gearwheel clamped coaxially on the workpiece spindle (3). The externally toothed rotary mounted honing gearwheel which can be set up radially to a first axis is offset at an angle about this axis (C') and can be trued with the first trueing gearwheel (17) or a second trueing gearwheel.read more
Citations
More filters
Patent
Cover part located within the beam path of a radar
TL;DR: In this article, a cover part which is located within the beam path of a radar and is composed of plastic with subregions which are composed of metal and are visible from the outside is designed.
Patent
Method for machining blanks in a clamp
Wolf-Dieter Höhn,Frank Scherer +1 more
TL;DR: In this article, the functional surfaces of the workpiece (circumference and both end faces of the blank) are brought into the final required form corresponding to final use by the machine tool, in particular, the rotary miller.
Patent
Verzahnungs- und Gewindeschleifmaschine
TL;DR: In this article, a Maschine zur spanabhebenden bearbeitung and zum Messen von Zahnradern und schraubenformigen Werkstucken is found.
Patent
Verfahren zum Abrichten bzw. Profilieren einer im wesentlichen zylindrischen Schleifschnecke
TL;DR: Abrichteinrichtungen erforderlich, die aufwendig sind und hochgenaue Schlittenfuhrungen sowie sehr genau mit der Schneckenbewegung beim Abrichten synchronisierte Bewegingsen benotigen as discussed by the authors.
Patent
Abrichtwerkzeug zum Abrichten einer Schleifschnecke
TL;DR: In this paper, the authors find an Abrichtwerkzeug zum abrichten einer im wesentlichen zylindrischen Schleifschnecke, whose auf der Werkstuckspindel einer zum fixmekontinuierlichen Walzschleifen im Tangential- oder Diagonalverfahren geeigneten gebruchine angeordnet ist.
References
More filters
Patent
Verfahren zur bearbeitung eines stirnzahnrades mittels eines rotierenden, zahnradartigen werkzeuges
TL;DR: In this article, a verfahren und einrichtung dafuer zu entwickeln, dass die bearbeitung des Werkstueckes derart erfolgen kann, das auch bei relativ grossem Bearbeitungsaufmass ein linienfoermiger Eingriff zwischen dem Werkzeug and dem Wreck moeglich ist.