Are there many papers looking at the use of h-cell reactors in the bioelectrochemical treatment of nitrate?
Best insight from top research papers
There are several papers that have looked at the use of H-cell reactors in the bioelectrochemical treatment of nitrate. Lust et al. found that a two-chamber microbial electrosynthesis cell (MES) can enhance nitrate removal efficiency compared to a control reactor . Xue et al. constructed a rice husk-enhanced anode bioelectrochemical reactor (RABER) and investigated its denitrification performances and mechanisms . Ratananikom et al. developed a bio-electrochemical reactor (BER) using copper wire and graphite plate to purify NO3-N-contaminated groundwater . Gadegaonkar et al. analyzed and reviewed bio-electrochemical systems (BES) for treating NO3-polluted water and investigated the factors influencing NO3 removal efficiency . Rodziewicz et al. compared the energy consumption in aerobic and anaerobic bio-electro reactors (BERs) for nitrate and phosphorus removal from wastewater . Overall, these papers demonstrate the potential of H-cell reactors in the bioelectrochemical treatment of nitrate.
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
2 Citations | The paper does not mention the use of H-cell reactors in the bioelectrochemical treatment of nitrate. |
| The provided paper does not mention the use of H-cell reactors in the bioelectrochemical treatment of nitrate. | |
| The paper does not mention the use of h-cell reactors in the bioelectrochemical treatment of nitrate. | |
| The paper does not mention the use of h-cell reactors in the bioelectrochemical treatment of nitrate. | |
6 Citations | The paper does not mention the use of H-cell reactors in the bioelectrochemical treatment of nitrate. |
Related Questions
Microbial fuel cells as a waste water treatment technique and how the treated water be used in agriculture?5 answersMicrobial fuel cells (MFCs) are a promising technology for wastewater treatment. MFCs can convert organic matter in wastewater into electricity while also removing pollutants, resulting in clean water as a byproduct. This clean water can be reused or released back into the environment, making MFCs a sustainable option for wastewater treatment. The use of MFCs in wastewater treatment plants can increase energy efficiency, reduce operational costs, and decrease greenhouse gas emissions. In addition to these benefits, MFCs have the potential to treat anaerobic-digester effluents (ADEs) and remove organics, nitrogen, and phosphorus from the wastewater. The treated water from MFCs can be used in agriculture, as it has been shown that MFCs can reduce CNP (carbon, nitrogen, and phosphorus) in ADEs at reasonable rates. This makes MFCs a cost-effective and environmentally friendly option for both wastewater treatment and water reuse in agriculture.
How does bioelectronics has been used in waste treatment plan?5 answersBioelectrochemical systems (BESs) have been used in waste treatment plans to address the challenges of wastewater management and resource recovery. BESs utilize microbial electron transfer and electrochemical transformation to generate sustainable and carbon-neutral energy. These systems combine biological and electrochemical treatments, using electroactive microorganisms to produce electric current from organic waste or degrade pollutants. BESs, such as microbial fuel cells (MFCs) and microbial electrolysis cells (MECs), have been studied for their ability to treat wastewater and recover value-added products. MFCs have been used to produce electricity and recover/remove nutrients, while MECs have been applied for the recovery of biofuels from wastewater. BESs offer advantages such as straightforward wastewater treatment with less energy demand, direct removal of pollutants, and avoidance of chemical agents. Additionally, BESs have been shown to treat a wide variety of wastewater sources and recover valuable resources while producing bioelectricity.
What is the effect of periodically supplementing hydrogen to a microbial electrolytic cell on denitrification performances?5 answersPeriodically supplementing hydrogen to a microbial electrolytic cell can have an effect on denitrification performances. In one study, it was found that under a 30 s open-circuit/30 s polarization mode, 86% of nitrate was removed at a maximum rate of 205 g NO3--N/m3/d with higher N2O production. This suggests that periodic polarization can favor the generation of chemical intermediates. Additionally, alkaliphilic bacteria were found to express denitrifying activity at pH levels close to 12, thanks to specific adaptation and resistance mechanisms. Some bacterial populations were able to support nitrate concentrations in the range of several hundred mM to 1 M. Another study used a designed microbial consortium in a microbial electrolysis cell and found that it presented a better H2 production profile, with the ability to maintain headspace H2 concentration relatively stable for a long time. This suggests that periodically supplementing hydrogen can enhance denitrification performances in a microbial electrolysis cell.
Who used an anionic exchange membrane in a bioelectrochemical system to ferment acids?4 answersElectrodialysis was used by Redwood et al. to ferment acids in a bioelectrochemical system. Cheng and Logan also used an anion exchange membrane in a bioelectrochemical system to ferment acids.
How does removal of nitrate in waste water using biofiltration?5 answersBiofiltration is a method used for the removal of nitrate in wastewater. It involves the use of biofilters, which are designed to promote microbial growth and enhance the removal of nitrate. The main mechanisms for nitrate removal in biofilters include biodegradation, sorption to biofilms, and physical separation. Different types of biofilters, such as submerged biofilters and biofilters using silica nanoparticles, have been studied for nitrate removal. Operational parameters, such as pH control, filter media optimization, and nutrient enhancement, can be optimized to achieve maximum nitrate removal. Various metrics, including enzyme activity and fluorescence spectroscopy, can be used to monitor the transformation and removal of nitrate during biofiltration. Studies have shown that biofiltration can effectively remove nitrate from wastewater, providing a reliable and cost-effective method for nitrate removal.
What are the key parameters and methodologies in using bioelectrochemical systems to recover ammonia?5 answersBioelectrochemical systems (BESs) have been extensively explored for the recovery of ammonia and nitrogen compounds from wastewater. Key parameters in using BESs for ammonia recovery include nitrification and cathodic denitrification, anaerobic ammonium oxidation (anammox), and ammonia transport across the membrane. BESs can achieve simultaneous nitrogen and phosphorus recovery through processes such as struvite precipitation, electromigration and concentration, and algal uptake. The efficiency of nitrogen removal and recovery in BESs can vary based on temperature and operating conditions. Various methods, including physical (air stripping, ion exchange, adsorption, membrane, and capacitive deionization), chemical (chlorination, struvite precipitation, electrochemical oxidation, and photocatalysis), and biological (activated sludge, microalgae, and photosynthetic bacteria), can be used for ammonia removal and recovery in wastewater treatment. Future research should focus on sustainable development and the application of these methods for ammonia recovery in wastewater.