Does mass transfer limitation in electrochemical water splitting reactions lead to an increase in Tafel slope?
Best insight from top research papers
Mass transfer limitation in electrochemical water splitting reactions can affect the Tafel slope . Increased hydrodynamics at the electrode surface can lead to changes in the Tafel slope for certain reactions, such as the reduction of CO2 . This suggests that mass transport plays a role in determining the reaction mechanisms and product distribution . However, the effect of mass transfer limitation on the Tafel slope in water splitting reactions is not explicitly mentioned in the abstracts provided. Further investigation or analysis of the specific papers is needed to determine if there is a direct relationship between mass transfer limitation and the Tafel slope in electrochemical water splitting reactions.
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
09 Mar 2023 | The provided paper does not discuss electrochemical water splitting reactions. |
7 Citations | The provided paper does not directly address the question of whether mass transfer limitation in electrochemical water splitting reactions leads to an increase in Tafel slope. |
4 Citations | The provided paper does not mention anything about the Tafel slope or its relationship with mass transfer limitation in electrochemical water splitting reactions. |
1.8K Citations | The provided paper does not directly address the question of whether mass transfer limitation in electrochemical water splitting reactions leads to an increase in Tafel slope. |
| The paper does not directly address the question of whether mass transfer limitation in electrochemical water splitting reactions leads to an increase in Tafel slope. |
Related Questions
What are the issues preventing electrolysis from being used for desalinating sea water?4 answersThe challenges hindering the use of electrolysis for desalinating seawater include the presence of impurities, such as foreign ions, microorganisms, and insoluble salts, which can block active sites and reduce membrane activity. Seawater electrolysis faces unique chemical challenges like detrimental halogen chemistries that poison anode catalysts and accelerate membrane degradation. The complex ionic environment in seawater leads to issues like chloride oxidation-related corrosion and the deposition of insoluble solids on electrode surfaces, impacting electrocatalytic performance. Furthermore, the sluggish kinetics, detrimental chlorine chemistry, and impurities/precipitates in seawater make it more challenging than pure water splitting for hydrogen production. Addressing these issues requires developing corrosion-resistant electrodes, selective catalysts, and stable seawater-splitting catalysts to enhance performance and stability in seawater electrolysis.
In electrochemical reactions, does a larger-sized catalyst material increase the Tafel slope?5 answersIn electrochemical reactions, the size of the catalyst material can influence the Tafel slope. Research on CO2 reduction and oxygen evolution reactions indicates that factors like rotation rate, hydrodynamics, and catalyst loading impact the Tafel slope. For instance, in the CO2 reduction system, increased hydrodynamics at the electrode surface alters the Tafel slopes for ethylene and methane, highlighting the role of mass transport alongside catalyst active sites in determining reaction mechanisms. Similarly, in the oxygen evolution reaction, Tafel slope values for Ni80Fe20OOH catalysts vary with rotation rate, loading, and hydroxide concentration, showcasing the complexity of factors influencing Tafel slopes. Therefore, while catalyst size is a factor, it is just one of many parameters that can affect the Tafel slope in electrochemical reactions.
The limitation in electrofermentation?5 answersElectrofermentation is limited by the requirement for high currents, which poses challenges to cell survival. However, electrofermentation has the potential to overcome these limitations by altering the oxidation-reduction potential of the medium and modifying microbial metabolism. Scaling up electrofermentation to commercial scale has not yet been achieved, but the increasing ease of genetic modification in LAB species may help overcome the challenges. In rumen fermentation, electrofermentation has been shown to enhance microbial biomass, dry matter digestibility, and volatile fatty acid production. In the production of butanol through ABE fermentation, electrofermentation can modify the intracellular ratio of NAD+/NADH, leading to higher product titers and productivity. Mixed microbial culture electrofermentation has also been used to enhance the production of butyric acid, with voltage difference applied between two graphite electrodes resulting in increased production rates. Overall, electrofermentation has the potential to improve product yields and selectivity, but further research is needed to optimize operational conditions and understand the mechanisms involved.
Does smaller-sized catalyst materials exhibit higher Tafel slopes in electrochemical water splitting applications?4 answersSmaller-sized catalyst materials in electrochemical water splitting applications do not necessarily exhibit higher Tafel slopes. The Tafel slope is a measure of the rate at which the current density changes with the applied potential. In the provided abstracts, different catalyst materials of varying sizes were investigated, and their Tafel slopes were reported. For example, CoMoP nanosheets showed small Tafel slopes of 54.9 and 69.7 mV dec−1 for oxygen and hydrogen evolution reactions, respectively. On the other hand, the Cu-Co-P/NF bifunctional electrocatalyst with grape-like clusters exhibited Tafel slopes of 40 mV dec−1 for the hydrogen evolution reaction and 74 mV dec−1 for the oxygen evolution reaction. Additionally, a cobalt-incorporated graphitic carbon nitride catalyst had a Tafel slope of 44.2 mV/dec for the hydrogen evolution reaction. These results suggest that the Tafel slope is dependent on the specific catalyst material and its composition, rather than the size of the catalyst.
What are the challenges in developing seawater electrolysis?4 answersDeveloping seawater electrolysis faces several challenges. The complex composition of seawater, including detrimental chlorine chemistry, impurities/precipitates, and sluggish kinetics, makes it more difficult than pure water electrolysis. The presence of foreign ions, microorganisms, and insoluble salts in seawater can block active sites and reduce membrane activity, leading to stability issues in the electrolyzer. Corrosion and deposition of insoluble solids on the electrode surface during seawater electrolysis also affect electrocatalytic performance. To overcome these challenges, researchers have focused on developing electrocatalysts to enhance the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) activities in seawater-based electrolyzers. Strategies such as pH design criterion, selective HER/OER, and Cl− blocking layers have been proposed to design effective cathodic and anodic catalysts for seawater electrolysis. Additionally, the development of stable and low-cost electrolyzers, as well as efficient in situ desalination components, is crucial for improving the practical and economic feasibility of direct seawater splitting.
Can a larger electrochemically active surface area lower the Tafel slope?5 answersA larger electrochemically active surface area can potentially lower the Tafel slope. The Tafel slope is a measure of the rate at which the current density changes with the electrode potential. In the case of MoS2/carbon electrocatalysts, it has been observed that the Tafel slope decreases with increasing mass loading, which is indicative of a larger electrochemically active surface area. This suggests that a larger surface area can enhance the efficiency of electron transport and facilitate the hydrogen evolution reaction through the Volmer-Heyrovsky mechanism. However, it is important to note that the relationship between surface area and Tafel slope may not be linear, as other factors such as mass transport limitations can also influence the observed Tafel slope.