How many tension tests of metal lattice structures have used DIC?
Best insight from top research papers
The tension tests of metal lattice structures utilizing Digital Image Correlation (DIC) were conducted in two research studies. One study focused on investigating steel and titanium-based micro-lattice structures manufactured using selective laser melting, where tension tests were initially performed on strands at different build angles . The other study examined the strains in tensile experiments using DIC to measure surface displacement, strain, and stress map distribution on flat samples painted with a speckle pattern. The results from the DIC technique were compared with open-source software, finite element analysis, and exact solutions, showing good agreement and accuracy ranging from 88% to 99% for different materials and conditions .
Answers from top 5 papers
More filters
| Papers (5) | Insight |
|---|---|
01 Feb 2021 1 Citations | Two tension tests of metal lattice structures were conducted using Digital Image Correlation (DIC) in the study, focusing on stress and strain distribution at crack tips in copper and aluminum samples. |
| The research paper conducted tension tests using Digital Image Correlation (DIC) on two different flat samples to analyze strains, stress, and displacement, without specifying the exact number of tests. | |
10 Citations | Not addressed in the paper. |
10 Citations | Not addressed in the paper. |
01 Apr 2019 8 Citations | Not addressed in the paper. |
Related Questions
How does tensile test effect mechanical properties of metal additive manufacturing?5 answersTensile testing has a significant effect on the mechanical properties of metal additive manufacturing. The orientation of the build, specimen geometry, and surface roughness all influence the tensile properties of the specimens. Changes in specimen geometry, such as size and cross-sectional area, can affect the yield strength, tensile strength, and elastic modulus. The build orientation also plays a role, with horizontally built specimens having higher yield and tensile strengths but lower elongation compared to vertically built specimens. Surface roughness, as measured by stylus contact profilometry and micro-computed tomography, can introduce measurement errors in gauge diameter and impact mechanical properties. Additionally, post-processing techniques like hot isostatic pressing and vacuum annealing can affect the density, oxygen content, and ductility of the specimens. Overall, understanding the influence of tensile testing on mechanical properties is crucial for accurately characterizing and predicting the strength of metal additive manufacturing parts.
What are the different methods for measuring belt tension?4 answersThere are several methods for measuring belt tension. One method involves using a reference indicator to define a reference position relative to the belt's surface, applying a force perpendicular to the belt's surface, and measuring the deflection of the belt to determine tension. Another method utilizes a belt tension measuring device with end rollers, a support arm, a deflection roller, and a position indicator to measure the distance between the deflection roller and the line connecting the end rollers. A third method involves deflecting the belt around a tension roller and using a force measuring device to measure the force along the adjustment path of the tension roller. The sensitivities of the force measuring device are determined for different points of the adjustment path, and the tensile stress is calculated using interpolation. Additionally, a clamp can be used to measure belt tension by clamping the belt and using a load sensing arrangement to provide a signal indicative of the tension. Finally, a belt tension meter can detect the distance variation between two measuring arms to calculate the belt tension in real time during installation.
Unlike concrete, the behavior of steel is practically identical in tension and compression. in RC model?3 answersThe behavior of steel is practically identical in tension and compression, unlike concrete. This is because steel is a ductile material that can undergo large deformations before failure, while concrete is a brittle material that fails suddenly and without warning. In reinforced concrete (RC) structures, steel is used to provide tensile strength to counteract the weak tensile behavior of concrete. The steel reinforcement bars are placed in the tension zone of the RC members to resist the tensile forces. This combination of steel and concrete allows for the efficient utilization of both materials, with steel providing the necessary tensile strength and concrete providing the compressive strength.
What is the tensile strength of nacre?5 answersThe tensile strength of nacre varies depending on the specific composition and fabrication method. Liang et al. found that the tensile strength of their nacre-mimetic films ranged from 135 MPa to 288.0 ± 15.2 MPa, with the highest strength achieved using Mn2+ crosslinking. Bu et al. designed a self-assembling nacre-like polymer composite with a tensile strength of 55.4 MPa. Sun et al. prepared a graphene-based nacre-like composite film with a tensile strength of 709.2 MPa. Nath et al. synthesized hydrogel films with a nacre-like structure and achieved a tensile strength of 38.0 MPa. Li reviewed the design of Engineered Cementitious Composite (ECC) inspired by nacre and mentioned its tensile ductility, but did not provide a specific value for the tensile strength of nacre.
How do lattice structures exist in construction?5 answersLattice structures are commonly used in construction due to their unique properties such as large surface area, distributed load-path, and lightweight design. They are effective in applications where weight reduction, thermal dissipation, and energy absorption are critical. Lattice structures can be generated using various methods, including voxel mesh-based isosurface extraction, explicit geometric stitching, and 3D sphere packing. Additive manufacturing (AM) technology has made it easier to fabricate lattice structures, pushing the development of design methods to a new stage. Lattice structures can be classified into uniform and non-uniform categories, and their performance and application are extensively studied. Designing highly functional unit cells is a key consideration for uniform lattice structures, which can be achieved through geometric unit cell-based, mathematical algorithm-generated, or topology optimization methods. Non-uniform lattice structures can be optimized using methods such as Voronoi-tessellation, size gradient method (SGM), size matching and scaling (SMS), and homogenization, optimization, and construction (HOC).
Where is the tension reinforced in raft foundation?3 answersThe tension reinforcement in raft foundation is located in different areas depending on the specific method used. In one method, the tension reinforcement is displaced into the strip footing, with outrigger and boundary beam steel bones forming the raft foundation's roof beam. In another method, a composite foundation reinforcing layer and a composite pile foundation are used to facilitate local lifting and overall reinforcement of the raft foundation. In a different approach, vertical and horizontal support steel pipes are used to reinforce the raft foundation, with an intermediate layer reinforcement mesh welded on the vertical support steel pipe. Additionally, a special steel bar support for raft foundation includes suspensions that can be adjusted to meet the requirements of the reinforcing bar placement. Finally, a waterproof steel bar support for ultra-thick raft foundation includes a supporting vertical pipe and a horizontal rod, with the bottom end of the reinforcing steel bar bracket fixed with the lower-layer reinforcing steel bar mesh.