What are the applications of foam transport in porous media?
Best insight from top research papers
Foam transport in porous media has various applications. It can be used as a liquid controlling agent in industrial processes such as improved/enhanced oil recovery (IOR/EOR), matrix-stimulation treatments, underground storage of CO2, hydrogen, compressed-air or natural gas withdrawal, geothermal energy, and contaminated soil-groundwater remediation processes . Foam flooding can improve sweep range and oil displacement efficiency in low-permeability reservoirs . Foam has also been used for gas mobility control in enhanced oil recovery (EOR) and subsurface remediation, where its performance is influenced by foam quality and permeability . Additionally, foam flow in porous media is important for improved/enhanced oil recovery processes and environmental remediation in petroleum-bearing geological formations and contaminated soils and aquifers . Foam displacement with oil in porous media can be studied to understand the effects of initial and injection conditions and the improved foam tolerance to oil on foam and oil bank propagation and displacement .
Answers from top 4 papers
More filters
| Papers (4) | Insight |
|---|---|
| Foam transport in porous media has applications in enhanced oil recovery (EOR) and subsurface remediation. | |
31 Oct 2022 | Foam transport in porous media has applications in enhanced oil recovery (EOR) processes and CO2 sequestration. |
10 Jun 2022 | The paper discusses the applications of foam flow in porous media for improved/enhanced oil recovery processes in petroleum-bearing geological formations and shallow subsurface in-situ NAPL environmental remediation in contaminated soils and aquifers. |
| The paper discusses the potential applications of foam as a liquid controlling agent in porous media, including improved/enhanced oil recovery, matrix-stimulation treatments, underground storage of CO2, and contaminated soil-groundwater remediation processes. |
Related Questions
Which papers studied monotoring foam propagation in porous media by using induced polarization in a 2D system?5 answersFoam propagation in porous media using induced polarization in a 2D system was not studied in any of the provided papers.
How can sodium bicarbonate be used to produce a foam?3 answersSodium bicarbonate can be used to produce a foam by acting as a blowing agent. It releases gas when heated, creating bubbles in the foam. The size and properties of the foam can be controlled by varying the amount of sodium bicarbonate used. In one study, nano sodium bicarbonate was prepared using a gas bubble liquid membrane interface method, resulting in smaller particle size and improved foam properties. Another study used sodium bicarbonate as a foaming agent in the production of epoxy foam, with varying amounts of sodium bicarbonate affecting the porosity and mechanical properties of the foam. The production of sodium bicarbonate itself involves a reaction with carbon dioxide, resulting in the formation of solid sodium bicarbonate. Overall, sodium bicarbonate can be used as a blowing agent to create foams with different properties for various applications.
What are the applications of porous Kapton?5 answersPorous Kapton has a wide range of applications including filtration, separation, catalyst supporting, gas absorbing, gas sparging, current collection, and medical implantation. Additionally, a porous glassy carbon membrane can be obtained by producing ion tracks in a polymeric Kapton film and then converting it to glassy carbon through heat treatment. This membrane has controllable pore characteristics and can be used in various applications. Furthermore, Kapton films have been shown to be transparent in the terahertz frequency range and can be used for splitting surface plasmon polaritons (SPPs) in large-scale terahertz SPP devices. Lastly, an asymmetric Kapton membrane fabricated through the phase inversion method has been optimized to enhance gas separation performance. This membrane has high selectivity and permeance for gases such as H2, CO2, and CH4.
Whats the foam in the heat transfer5 answersFoam in heat transfer refers to the use of metal or gel foams to enhance heat transfer performance in various applications. Metal foams, such as copper foam and carbon foam, have high porosity and specific surface area, allowing for improved heat transfer in solid-liquid and liquid-gas phase change systems. Grooved copper foam, in particular, has been found to achieve a good balance between boiling heat transfer characteristics and pump power consumption. Gel foams, on the other hand, are used for fire extinguishing and thermal protection in the chemical industry, and the addition of nanoparticles can enhance their thermal stability and insulation performance. The interaction between thermal interface materials (TIMs) and carbon foams, such as graphitic foam, also plays a role in heat transfer, with the thickness of the TIM affecting the overall effective thermal conductivity. Overall, foam materials offer unique properties that can be utilized to improve heat transfer in various applications.
How can carbon dioxide and hydrogen be stored in porous media?0 answersCarbon dioxide (CO2) and hydrogen (H2) can be stored in porous media through various methods. One approach is to use geological formations as storage sites for subsurface H2 storage. This involves injecting H2 into the formations, often with CO2 as a cushion gas, and analyzing the hydrodynamic behavior to optimize storage performance. Another method is the design of new materials specifically for CO2 and H2 storage, such as coumarine derivatives linked to thiazolidinone. These materials have been shown to have high adsorption capacities for CO2 and H2 gases. Additionally, benzoxazine-containing porous polymers and ferrocene-containing porous organic polymers have been synthesized and demonstrated to have high porosity and good adsorption properties for CO2 and H2. These materials show promise as solid absorbents for storing CO2 and H2.
What are the effects of foaming agents on the permeability of porous media?3 answersThe effects of foaming agents on the permeability of porous media vary depending on the specific surfactant used. In some cases, the bubble-to-grain size ratio is the main parameter that controls the liquid permeability, with an increase in this ratio leading to a sharp decrease in permeability. However, in other cases, the impact of foam on liquid-phase mobility is not pronounced and can be ignored. The choice of surfactant also plays a role, with different surfactants exhibiting different foaming abilities and foam stabilization mechanisms. Additionally, the foam flow can be influenced by factors such as foam ability, stability, bubble size, and the grain size of the porous media. The pore geometry of the porous media can also affect foam flow, with changes in pore size and angularity influencing the initiation of foam generation and the overall recovery of oil.