What are the common materials used for reinforcing struts and ties in concrete continuous deep beams?
Best insight from top research papers
The common materials used for reinforcing struts and ties in concrete continuous deep beams include steel fibers , fiber-reinforced polymer (FRP) bars , glass-fiber reinforced polymer (GFRP) bars , and rubberized concrete .
Answers from top 4 papers
More filters
| Papers (4) | Insight |
|---|---|
1 Citations | The provided paper does not mention the common materials used for reinforcing struts and ties in concrete continuous deep beams. |
01 Nov 2020 | The provided paper does not mention the common materials used for reinforcing struts and ties in concrete continuous deep beams. |
| The provided paper does not mention the common materials used for reinforcing struts and ties in concrete continuous deep beams. | |
| The provided paper does not mention the common materials used for reinforcing struts and ties in concrete continuous deep beams. |
Related Questions
What is the important of Fibre Reinforced Polymer for narrow beam?5 answersFibre Reinforced Polymer (FRP) is crucial for narrow beams as it enhances load-bearing capacity, improves ductility, and reduces degradation damages. FRP materials are widely accepted in the construction industry for retrofitting existing structures to make them more resistant to seismic activity and ground motion. Additionally, externally bonded FRP is increasingly utilized to support reinforced concrete structures due to its exceptional properties like good tensile strength and corrosion resistance. The use of FRP in strengthening beams follows the principle of conventional pre-stressed concrete, resulting in higher cracking, yielding, and bearing loads, especially under service loads. Overall, FRP offers a cost-effective and efficient solution for reinforcing narrow beams, improving their overall performance and durability.
What is the thesis related to behavior of continuous concrete beam with couplers?5 answersThe thesis related to the behavior of continuous concrete beams with couplers is investigated in multiple papers. Nguyen et al. conducted experiments and finite element analysis to compare the load capacity and behavior of reinforced concrete beams with and without couplers, finding relatively small changes in the beams with couplers compared to those without splice on steel bars. Sayed et al. performed experimental examination on coupling beams with different configurations of square openings, observing a decrease in stiffness when using two or four openings. Mobedi et al. conducted a numerical and experimental study on a dry precast connection, finding that the specimens with a shorter coupler distance from the external face of the column and with a higher grout compressive strength lead to appropriate results. Salman used numerical investigation and finite element modeling to assess the effect of changing beam depth on the shear strength of continuous deep beams, finding good agreement with experimental beam tests.
What material are tie rods made out off?4 answersTie rods can be made from various materials such as cast iron, aluminum, plastic, non-metal fibers like fiberglass, and FRP (Fiber Reinforced Plastic). Cast iron and aluminum are commonly used materials for tie rods in car steering systems, with aluminum being preferred due to its lighter weight and lower cost compared to cast iron. Plastic tie rods can also be used, which include a joint with length-adjustable connection and ribs for locking the parts together. Non-metal fibers like fiberglass can be wound around thimble elements to create a strong tie rod without the drawbacks of conventional metal tie rods. Another option is using FRP for the tie rod assembly, where the tie rod itself is made of FRP and the connection members are made of steel.
What material are go-kart steering stub tie rods made from?5 answersGo-kart steering stub tie rods are made from various materials. One paper by Parker et al. mentions that the tie rod sections can be made of complementary shapes with facing side flanges, which can be connected by welding, riveting, or seaming. Another paper by Gottschalk et al. suggests that resilient tie rods can be constructed using substantially compliant, flexible, and/or resilient material, which may have a rectangular or non-circular cross-section. Additionally, a paper by Long et al. describes a steering tie rod with a tie rod body and a main sleeve scale, indicating that the tie rod body can be made of threaded material. Therefore, go-kart steering stub tie rods can be made from materials such as metal, resilient materials, or threaded materials, depending on the design and construction of the tie rod.
What is the articles related to behavior of continuous concrete beam with couplers?5 answersThe articles related to the behavior of continuous concrete beams with couplers are as follows: Nguyen et al. investigated the effect of the position and splicing ratio of reinforcement bars by coupler on the behavior of reinforced concrete beams. Wang et al. proposed a new kind of continuous composite beam consisting of a steel box-girder and ultra-high-performance concrete waffle slab. Salman presented a numerical investigation of continuous reinforced concrete deep beams, studying parameters such as shear span to depth ratio, reinforcement ratio, effective depth, and concrete compressive strength. Aragon and Weldon conducted an analytical investigation of the behavior of concrete shear walls coupled together using unbonded post-tensioned precast concrete coupling beams. Naish et al. published a paper on reinforced concrete coupling beams, specifically focusing on testing.
What's the most used material for landing gear struts?5 answersThe most used material for landing gear struts is steel.