What is the average gas yield of gasifier propotypes in m³/kg?
Best insight from top research papers
The average gas yield of gasifier prototypes ranges from 0.74 m³/kg to 1.87 m³/kg. Specifically, a study on a bubbling fluidized bed reactor achieved a gas yield rate of 0.74 m³/kg , while another study on interconnected fluidized beds reported a maximum syngas yield of 1.87 m³/kg . Additionally, a pilot scale fixed-bed downdraft biomass gasifier experiment showed an average syngas yield of 1.77 m³/kg . These results highlight the variability in gas yield depending on the type of gasifier and operational conditions, emphasizing the importance of optimizing gasification processes for efficient syngas production from biomass.
Answers from top 4 papers
More filters
Papers (4) | Insight |
---|---|
01 Feb 2020 | The average gas yield of the gasifier prototypes developed for biomass gasification was appreciable, indicating efficient production of syngas from agricultural wastes. |
Open access 01 Jan 2009 5 Citations | The average gas yield of gasifier prototypes in the study was 1.87 m³/kg, indicating the potential for high-quality syngas production from biomass gasification in interconnected fluidized beds. |
12 Citations | The average gas yield of the gasifier prototypes was 0.74 m³/kg, with better performance observed in the bubbling fluidized bed reactor compared to the downdraft fixed bed reactor. |
The average gas yield of gasifier prototypes in the study was 1.77 Nm³ per kg of wood waste consumed. |
Related Questions
What is the minimum gas yield for a gasifier prototype in m^3/kg?5 answersThe minimum gas yield for a gasifier prototype in m^3/kg can vary based on the design and operational conditions. Different prototypes have shown varying gas yields. For instance, a wood-fired gasifier prototype achieved a gas yield of 1.33 Nm3/kg of biomass feedstock. On the other hand, a downdraft gasifier using rice hulls as fuel produced a gas with a maximum yield of combustible constituents, including 13.67% CO, 5.13% H2, and 2.42% CH4. These examples highlight the range of gas yields that can be obtained from different types of gasifier prototypes, showcasing the importance of design and operational parameters in determining the gas yield efficiency of such systems.
What is the density of syngas produced from gasification of biomass?5 answersThe density of syngas produced from biomass gasification varies depending on the specific process and conditions used. Different studies have reported varying compositions and characteristics of syngas. For instance, one study found that syngas from biomass gasification using a plasma arc had a lower heating value (LHV) of 10.23 MJ/Nm^3, with a H2:CO ratio of 1.42. Another research indicated that syngas from gasification of wood pellets had an LHV of 6.23 MJ/Nm^3, with a composition of 28.15% CO, 16.64% H2, 6.19% CO2, and 2.54% CH4. Additionally, a study on catalytic methane reformation coupled with gasification showed an increase in energy content by 92% and an enhanced H2:CO ratio of approximately 1.8, resulting in a higher density of syngas compared to the original gasification product. These findings highlight the variability in syngas density based on the gasification method and conditions employed.
What is the enthalpy kJ/kg of syngas at 900 degrees celsius?4 answersThe enthalpy of syngas at 900 degrees Celsius is dependent on the specific process and materials used. In the context of gasification of sawdust biomass, at 950°C, the energy yield of syngas was 13.2 MJ/kg biomass. Additionally, in a system involving syngas cooling, the first superheated steam generated had an enthalpy of less than approximately 3800 kJ/kg. Furthermore, in the production of syngas via chemical looping with CeO2/Ce2O3 redox pair, the system efficiency was around 62% at 900°C. Therefore, the enthalpy of syngas at 900 degrees Celsius can vary based on the specific process parameters and materials utilized, ranging from 13.2 MJ/kg biomass to approximately 3800 kJ/kg, with an efficiency of around 62%.
What is rolling average biogas production?4 answersThe rolling average biogas production refers to the continuous calculation of the average biogas yield over a specific period, typically to monitor trends or performance changes. Various studies focus on optimizing biogas production from food waste through anaerobic digestion processes. Research indicates that factors like nitrogen content, substrate loading rates, and the addition of external nitrogen sources such as ammonium chloride can significantly impact biogas production. Additionally, the use of crude glycerin from biodiesel processes has shown to increase biogas yields when added to food waste in anaerobic reactors. These findings highlight the importance of monitoring and analyzing biogas production trends through rolling averages to enhance efficiency and sustainability in biogas generation from organic substrates.
How much energy is used for cooking with gas on average?5 answersOn average, the energy used for cooking with gas can vary based on the specific type of gas and the cooking method. In the context of New Zealand's catering industry, it was found that deep frying had the most energy-efficient cooking method with an energy intensity of 0.69 MJ/kg, while other traditional methods like heating and frying, grilling, roasting and baking, and steaming and boiling had significantly higher energy intensities ranging from 7.98 to 12.75 MJ/kg. Additionally, a study on Indian household cooking fuel options revealed that LPG derived from natural gas has the highest energy efficiency among fossil fuels at 45%, while coal is the least efficient at 14.7%. Therefore, the energy used for cooking with gas on average can be influenced by factors such as the type of gas and the cooking method employed.
What is the Specific fuel consumption for gasification of agricultural resisues?5 answersThe specific fuel consumption for gasification of agricultural residues varies depending on the specific feedstock and gasification technology used. In the study by Aguado et al., a biomass gasification plant fueled with olive oil and almond industry residues had an average consumption of 13-14 kg/h of olive pomace pellets as feedstock, resulting in a producer gas volumetric flow rate of 31 Nm3/h. In the study by Cerone and Zimbardi, the gasification of almond and hazelnut shells in a pilot updraft gasifier resulted in energy conversion efficiencies from solid to gas of up to 76%. Ghani et al. found that hydrogen gas production from coconut coir and palm kernel shell using air gasification reached up to 67 mol%. Parihar et al. studied the gasification of coconut shell and cotton stalk and reported a loss of power of 12% due to poor material movement within the reactor. Sadaka et al. achieved a specific gas yield of 0.32 to 0.58 m3/kg biomass for the gasification of soybean residues at different reactor temperatures.