Nanofluids are described as a relatively new kind of colloidal solutions with a particle size smaller than one billionth of a meter (1–100 nm) suspended in the base fluid so as to enhance the thermophysical properties, which makes them an obvious choice for use in number of commercial applications including engineering, medical sciences, biotechnology, agriculture technology, transportation etc. With the advancement in nanotechnology during last few years, scientific community focuses on improvising combustion behavior, stability aspects, various engine performance parameters and emission characteristics of conventional diesel engine using nanoparticle laden diesel biodiesel fuel blends. Most recently few experimental works on above issues using nanosized metallic, non-metallic, organic and mixed particles in the base liquid fuel for diesel engine have appeared in the open literature. The obtained results are very encouraging due to multifold enhancement in thermo physical and chemical properties of modified fuel such as high surface to volume ratio, high reactive medium for combustion, enhanced heat and mass transport properties due to high thermal conductivity, improvement in flash point, fire point, pour point etc depending upon the type of nanoparticles used, their particle size and concentration with base fuel. Despite having all superiorities, somewhat unclear and contradictory results are found in the literature, further the experimental results of different researchers are not generalized so far as to reach at common consensus about this new approach of fuel modification. Keeping all these facts in mind, a serious attempt has been made to summarize the important published work on combustion and stability aspects of nanoparticle laden diesel, biodiesel fuels and their blends, and its effects on fuel and engine overall characteristics with the objective to provide a pathway to conduct further research in this area for utilizing maximum potential of nanoparticle fuel emulsion technology and to provide a promising future fuel for diesel engine.

A comprehensive review on combustion and stability aspects of metal nanoparticles and its additive effect on diesel and biodiesel fuelled C.I. engine.

Biodiesels are gaining more importance as a promising alternative energy resource. Engine performance and emission characteristics of unmodified biodiesel fueled diesel engines are highly influenced by its ignition and combustion behavior. This review article presents the literature review on ignition delay (ID), combustion and emission characteristics of biodiesel fueled diesel engine. More than hundred articles report which have been published mostly in the last decade are reviewed in this paper. The investigation results report that the combustion characteristics of bio fueled engine is slightly different from the engine running with petroleum diesel. Most of the investigation results have reported that as compared to diesel, biodiesel has early start of combustion (SOC) and shorter ID of between 1–5° and 0.25–1.0°, respectively. Higher cetane number (CN), lower compressibility and fatty acid composition of biodiesel have been identified as the main elements for early SOC and shorter ID. In addition, it is also found that, the heat release rate (HRR) of biodiesel is slightly lower than diesel owing to the lower calorific value, lower volatility, shorter ID and higher viscosity.

Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel

Impact of compression ratio and injection parameters on the performance and emissions of a DI diesel engine fueled with biodiesel-blended diesel fuel

Effect of injection parameters on the combustion and emission characteristics in a common-rail direct injection diesel engine fueled with waste cooking oil biodiesel

The influence of operating parameters on the performance and emissions of a DI diesel engine using methanol-blended-diesel fuel

Fuel injection pressures in diesel engine plays an important role for engine performance obtaining treatment of combustion. The present diesel engines such as fuel direct injection, the pressures can be increased about 100 â 200 Mpa bar in fuel pump injection system. The experimental investigated effects of fuel injection pressure on engine performance. Experiments have been performed on a diesel engine with four-cylinder, two-stroke, direct injection. Engine performance values such as indicated pressure, indicated horse power, shaft horse power, brake horse power, break mean effective pressure and fuel consumption have been investigated both of variation engine speeds - fixed load and fixed engine speed â variation loads by changing the fuel injection pressure from 180 to 220 bar. According to the results, the best performance of the pressure injection has been obtained at
220 bar, specific fuel consumption has been obtained at 200 bar for fixed load â variation speeds and at 180 bar for variation loads â fixed speed. The results of the experiment have given as graphics in this paper.

Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment

Effect of combustion temperature in the engine cylinder of diesel engine convert to Compressed Natural Gas (CNG) engine was presents in this study. The objective of this study was to investigate the engine cylinder combustion temperature effect of diesel engine convert to CNG engine on variation engine speed. Problem statement: The hypothesis was that the lower performance of CNG engine was caused by the effect of lower in engine cylinder temperature. Are the CNG engine is lower cylinder temperature than diesel engine? This research was conducted to investigate the cylinder temperature of CNG engine as a new engine compared to diesel engine as a baseline engine. Approach: In this study, the combustion temperature was investigated in 7 cases engine speed. The engine speeds variation start from 1000 rpm until 4000 rpm with variation in 500 rpm. The engine conversion development and combustion temperature investigation was conducted at automotive laboratory, faculty of mechanical engineering, University Malaysia Pahang, Malaysia. Results: The results of the combustion temperature in the engine cylinder in variation engine speeds showed that diesel engine convert to CNG engine effect decrease the combustion temperature in the engine cylinder characteristics. Conclusion/Recommendations: In the low speed the conversion can be increase the combustion temperature, but the increasing engine speeds can be decrease the combustion temperature in the engine cylinder.

Combustion Temperature Effect of Diesel Engine Convert to Compressed Natural Gas Engine

Problem statement: The Compressed Natural Gas (CNG) is a gaseous form of natural gas, it have been recognized as one of the promising alternative fuel due to its substantial benefits compared to gasoline and diesel. Natural gas is produced from gas wells or tied in with crude oil production. Approach: Natural gas is promising alternative fuel to meet strict engine emission regulations in many countries. Compressed Natural Gas (CNG) has long been used in stationary engines, but the application of CNG as a transport engines fuel has been considerably advanced over the last decade by the development of lightweight high-pressure storage cylinders. Results: The technology of engine conversion was well established and suitable conversion equipment is readily available. For petrol engines or spark ignition engines there are two options, a bi-fuel conversion and use a dedicated to CNG engine. The diesel engines converted or designed to run on natural gas, there were two main options discussed. There are dual-fuel engines and normal ignition can be initiated. Natural gas engines can be operated at lean burn and stoichiometric conditions with different combustion and emission characteristics. Conclusions: In this study, the low exhaust gas emissions of CNG engines research and development were highlighted. Stoichiometric natural gas engines were briefly reviewed. To keep the output power, torque and emissions of natural gas engines comparable to their gasoline or diesel counterparts. High activity for future green CNG engines research and development to meet future stringent emissions standards was recorded in the study.

Green Engines Development Using Compressed Natural Gas as an Alternative Fuel: A Review

The single cylinder modeling and simulation for four-stroke direct-injection diesel engine requires the use of advanced analysis and development tools to carry out of performance the diesel engine model. The simulation and computational development of modeling for the research use the commercial of GT-SUITE 6.2 software. In this research, the one dimensional modeling of single cylinder for four-stroke direct-injection diesel engine developed. The analysis of the model is combustion performance process in the engine cylinder. The model simulation covers the full engine cycle consisting of intake, compression, power and exhaust. In this model it can to know the diesel engine performance effect with simulation and modeling in any speeds (rpm) parameters. The performance trend of the diesel engine model developed result of this model based on the theoretical and computational model shows in graphics in the paper.

Investigation of Diesel Engine Performance Based on Simulation

The diesel engine converted to compressed natural gas (CNG) engine effect is lower in performance. Problem statement: The hypothesis is that the lower performance of CNG engine is caused by the effect of lower in engine cylinder pressure. Are the CNG engine is lower cylinder pressure than diesel engine? This research is conducted to investigate the cylinder pressure of CNG engine as a new engine compared to diesel engine as a baseline engine. Approach: The research approach in this study is by convert the diesel engine to multi point injection dedicated CNG engine. The engine conversion is by changed the diesel fuel to CNG fuel, changed the injection fuel system, changed the ignition system, modified piston to reduce the compression ratio and added throttle to in intake port. If the development is completed, the engine cylinder pressure is investigated. In this study, the cylinder pressure is investigated in 7 cases engine speed from 1000 to 4000 rpm with range in 500. Results: The research results are cylinder pressure and maximum pressure of CNG engine compared to diesel engine in 1000 to 4000 rpm engine speed. Conclusion/Recommendations: Effect of diesel engine converted to CNG engine is decrease the cylinder pressure. The further research is needed to find the higher performance of CNG engine.

Effect of Diesel Engine Converted to Sequential Port Injection Compressed Natural Gas Engine on the Cylinder Pressure vs Crank Angle in Variation Engine Speeds

Abdul Rahim Ismail

Papers

Fuel Injection Pressure Effect on Performance of Direct Injection Diesel Engines Based on Experiment

Combustion Temperature Effect of Diesel Engine Convert to Compressed Natural Gas Engine

Green Engines Development Using Compressed Natural Gas as an Alternative Fuel: A Review

Investigation of Diesel Engine Performance Based on Simulation

Effect of Diesel Engine Converted to Sequential Port Injection Compressed Natural Gas Engine on the Cylinder Pressure vs Crank Angle in Variation Engine Speeds