Review of high efficiency and clean reactivity controlled compression ignition (RCCI) combustion in internal combustion engines

Evolution, challenges and path forward for low temperature combustion engines

Heavy-Duty RCCI Operation Using Natural Gas and Diesel

Due to the shortage of the conventional fossil fuels and air pollution from combustion, new, sustainable and cleaner fuel resources are urgently required. Biodiesel has been introduced as a potential and alternative fuel for years. Biodiesel can be produced from different sources such as vegetable oils, animal fat, waste oil, etc. All of them are renewable and do not affect the food security. When biodiesel is used as a fuel resource for diesel engines, the performance and emission characteristics such as brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and brake power are almost maintained while hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM) is decreased significantly. However, higher NOx concentration is observed. This disadvantage of using biodiesel or biofuels in general is improved in recent years. The purpose of this work is to do a comprehensive investigation of different approaches applying to biodiesel fueled engine like biodiesel additives, exhaust gas recirculation (EGR), water injection (WI), emulsion technology (ET), injection strategy modification, simultaneous technologies (ST), combustion chamber geometry modification and low temperature combustion (LTC) mode. By the way, the impacts of these technologies on engine performance and emission characteristics are summarized. Upon the comparison, using LTC mode is more efficient and feasible than the others. It can reduce both NOx and PM emissions simultaneously by up to 95% and 98%, respectively, while engine performance is slightly reduced. Looking inside the LTC mode, the most efficient model is the reactivity controlled compression ignition (RCCI) combustion system. Applying RCCI combustion model might lead to the increase of CO and HC emissions, but this issue can be easily solved by using some available technologies.

Effect of different technologies on combustion and emissions of the diesel engine fueled with biodiesel: A review

Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review

In the present study, various low temperature combustion strategies were investigated using single cylinder engine experiments. The combustion strategies that were investigated premix the majority of the fuel and do not require exhaust gas recirculation (EGR) to achieve ultra-low NOx and soot emissions for low- to mid-load engine operation. These types of advanced compression ignition combustion strategies have been shown to have challenges with combustion phasing control. The focus of the study was to compare engine performance and emissions, combustion sensitivity to intake conditions, and the ability to control any observed sensitivity through the fuel injection strategy. Even though these are steady state engine experiments, this will demonstrate a given combustion strategies controllability on a cycle-to-cycle basis. The combustion strategies that were investigated are fully premixed dual-fuel homogeneous charge compression ignition (HCCI), dual-fuel reactivity controlled compression ignition (RCCI),...

Comparison of Low Temperature Combustion Strategies for Advanced Compression Ignition Engines with a Focus on Controllability

Effect of Piston Bowl Geometry on Dual Fuel Reactivity Controlled Compression Ignition (RCCI) in a Light-Duty Engine Operated with Gasoline/Diesel and Methanol/Diesel

Effect of Cetane Improvers on Gasoline, Ethanol, and Methanol Reactivity and the Implications for RCCI Combustion

Many research studies have shown that low temperature combustion in compression ignition engines has the ability to yield ultra-low NOx and soot emissions while maintaining high thermal efficiency. To achieve low temperature combustion, sufficient mixing time between the fuel and air in a globally dilute environment is required, thereby avoiding fuel-rich regions and reducing peak combustion temperatures, which significantly reduces soot and NOx formation, respectively. It has been demonstrated that achieving low temperature combustion with diesel fuel over a wide range of conditions is difficult because of its properties, namely, low volatility and high chemical reactivity. On the contrary, gasoline has a high volatility and low chemical reactivity, meaning it is easier to achieve the amount of premixing time required prior to autoignition to achieve low temperature combustion. In order to achieve low temperature combustion while meeting other constraints, such as low pressure rise rates and maintaining ...

https://journals.sagepub.com/doi/pdf/10.1177/1468087415621805

A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low NOx and soot emissions: Effects of in-cylinder fuel stratification*:

Adam B. Dempsey

Papers

Heavy-Duty RCCI Operation Using Natural Gas and Diesel

Comparison of Low Temperature Combustion Strategies for Advanced Compression Ignition Engines with a Focus on Controllability

Effect of Piston Bowl Geometry on Dual Fuel Reactivity Controlled Compression Ignition (RCCI) in a Light-Duty Engine Operated with Gasoline/Diesel and Methanol/Diesel

Effect of Cetane Improvers on Gasoline, Ethanol, and Methanol Reactivity and the Implications for RCCI Combustion

A perspective on the range of gasoline compression ignition combustion strategies for high engine efficiency and low NOx and soot emissions: Effects of in-cylinder fuel stratification*: