ion. The oxidative addition mechanism was originally proposed22i because of the lack of a strong rate dependence on polar factors and on the acidity of the medium. Later, however, the electrophilic substitution mechanism also was proposed. Recently, the oxidative addition mechanism was confirmed by investigations into the decomposition and protonolysis of alkylplatinum complexes, which are the reverse of alkane activation. There are two routes which operate in the decomposition of the dimethylplatinum(IV) complex Cs2Pt(CH3)2Cl4. The first route leads to chloride-induced reductive elimination and produces methyl chloride and methane. The second route leads to the formation of ethane. There is strong kinetic evidence that the ethane is produced by the decomposition of an ethylhydridoplatinum(IV) complex formed from the initial dimethylplatinum(IV) complex. In D2O-DCl, the ethane which is formed contains several D atoms and has practically the same multiple exchange parameter and distribution as does an ethane which has undergone platinum(II)-catalyzed H-D exchange with D2O. Moreover, ethyl chloride is formed competitively with H-D exchange in the presence of platinum(IV). From the principle of microscopic reversibility it follows that the same ethylhydridoplatinum(IV) complex is the intermediate in the reaction of ethane with platinum(II). Important results were obtained by Labinger and Bercaw62c in the investigation of the protonolysis mechanism of several alkylplatinum(II) complexes at low temperatures. These reactions are important because they could model the microscopic reverse of C-H activation by platinum(II) complexes. Alkylhydridoplatinum(IV) complexes were observed as intermediates in certain cases, such as when the complex (tmeda)Pt(CH2Ph)Cl or (tmeda)PtMe2 (tmeda ) N,N,N′,N′-tetramethylenediamine) was treated with HCl in CD2Cl2 or CD3OD, respectively. In some cases H-D exchange took place between the methyl groups on platinum and the, CD3OD prior to methane loss. On the basis of the kinetic results, a common mechanism was proposed to operate in all the reactions: (1) protonation of Pt(II) to generate an alkylhydridoplatinum(IV) intermediate, (2) dissociation of solvent or chloride to generate a cationic, fivecoordinate platinum(IV) species, (3) reductive C-H bond formation, producing a platinum(II) alkane σ-complex, and (4) loss of the alkane either through an associative or dissociative substitution pathway. These results implicate the presence of both alkane σ-complexes and alkylhydridoplatinum(IV) complexes as intermediates in the Pt(II)-induced C-H activation reactions. Thus, the first step in the alkane activation reaction is formation of a σ-complex with the alkane, which then undergoes oxidative addition to produce an alkylhydrido complex. Reversible interconversion of these intermediates, together with reversible deprotonation of the alkylhydridoplatinum(IV) complexes, leads to multiple H-D exchange

Activation of c-h bonds by metal complexes

This article provides an up-to-date perspective on the use of anion-exchange membranes in fuel cells, electrolysers, redox flow batteries, reverse electrodialysis cells, and bioelectrochemical systems (e.g. microbial fuel cells). The aim is to highlight key concepts, misconceptions, the current state-of-the-art, technological and scientific limitations, and the future challenges (research priorities) related to the use of anion-exchange membranes in these energy technologies. All the references that the authors deemed relevant, and were available on the web by the manuscript submission date (30th April 2014), are included.

/pdf/anion-exchange-membranes-in-electrochemical-energy-systems-46uquenb56.pdf

Anion-exchange membranes in electrochemical energy systems

This review summarizes different catalytic options for the production of syngas and hydrogen starting from simple hydrogen-containing molecules. Particular attention is given to new direct catalytic alternatives in natural gas conversion. Improvements in syngas technology are discussed, including partial oxidation, autothermal reforming, combined reforming and carbon dioxide reforming, and the energy efficiencies of direct and indirect methane conversion are compared. Processes, issues and practical difficulties are discussed with academic and applied efforts presented in parallel. It is emphasized that most of the ongoing research related to the direct processes is at the exploratory stage while technology utilizing indirect approach has advanced to semi-works and initial commercialization plants. The new emerging processes based on partial oxidation features are unique for syngas generation. Further enhancement of such processes plus improvements in other second generation technologies and advances in direct processes are anticipated to provide additional, new attractive paths to the chemical conversion of natural gas. Similarly, on board generation of hydrogen-rich gaseous fuels either for spark ignition engines or for coupled-fuel-cells electric engines is discussed within the scope of both partial oxidation and catalytic decomposition of methanol. A concept based in the thermochemical water splitting, which provides a renewable portable fuel from water in the form of H2, is also presented. Above all, as the chemistry involved in most of these catalytic alternatives takes place under extreme conditions, highly stable catalysts and engineering concepts are being developed.

New catalytic routes for syngas and hydrogen production

Oxidation catalysis not only plays a crucial role in the current chemical industry for the production of key intermediates such as alcohols, epoxides, aldehydes, ketones and organic acids, but also will contribute to the establishment of novel green and sustainable chemical processes. This review is devoted to dealing with selective oxidation reactions, which are important from the viewpoint of green and sustainable chemistry and still remain challenging. Actually, some well-known highly challenging chemical reactions involve selective oxidation reactions, such as the selective oxidation of methane by oxygen. On the other hand some important oxidation reactions, such as the aerobic oxidation of alcohols in the liquid phase and the preferential oxidation of carbon monoxide in hydrogen, have attracted much attention in recent years because of their high significance in green or energy chemistry. This article summarizes recent advances in the development of new catalytic materials or novel catalytic systems for these challenging oxidation reactions. A deep scientific understanding of the mechanisms, active species and active structures for these systems are also discussed. Furthermore, connections among these distinct catalytic oxidation systems are highlighted, to gain insight for the breakthrough in rational design of efficient catalytic systems for challenging oxidation reactions.

Recent advances in heterogeneous selective oxidation catalysis for sustainable chemistry

A homogeneous system for the selective, catalytic oxidation of methane to methanol via methyl bisulfate is reported. The net reaction catalyzed by mercuric ions, Hg(II), is the oxidation of methane by concentrated sulfuric acid to produce methyl bisulfate, water, and sulfur dioxide. The reaction is efficient. At a methane conversion of 50 percent, 85 percent selectivity to methyl bisulfate (∼43 percent yield; the major side product is carbon dioxide) was achieved at a molar productivity of 10–7 mole per cubic centimeter per second and Hg(II) turnover frequency of 10–3 per second. Separate hydrolysis of methyl bisulfate and reoxidation of the sulfur dioxide with air provides a potentially practical scheme for the oxidation of methane to methanol with molecular oxygen. The primary steps of the Hg(II)-catalyzed reaction were individually examined and the essential elements of the mechanism were identified. The Hg(II) ion reacts with methane by an electrophilic displacement mechanism to produce an observable species, CH3HgOSO3H, 1. Under the reaction conditions, 1 readily decomposes to CH3OSO3H and the reduced mercurous species, Hg22+ The catalytic cycle is completed by the reoxidation of Hg22+ with H2SO4 to regenerate Hg(II) and byproducts SO2 and H2O. Thallium(III), palladium(II), and the cations of platinum and gold also oxidize methane to methyl bisulfate in sulfuric acid.

https://science.sciencemag.org/content/sci/259/5093/340.full.pdf

A Mercury-Catalyzed, High-Yield System for the Oxidation of Methane to Methanol

(1990). Conversion of Methane by Oxidative Coupling. Catalysis Reviews: Vol. 32, No. 3, pp. 163-227.

/pdf/conversion-of-methane-by-oxidative-coupling-4q6ymd6a5e.pdf

Conversion of Methane by Oxidative Coupling

Cationic binuclear "A-frame" complexes of rhodium(I) and iridium(I)

Novel binuclear cationic complexes of rhodium(I) and iridium(I)

The structures and hydroformylation catalytic activities of polyphosphine complexes of rhodium(i), and related complexes-immobilised on polymer supports

Alan R. Sanger

Papers

Conversion of Methane by Oxidative Coupling

Cationic binuclear "A-frame" complexes of rhodium(I) and iridium(I)

Novel binuclear cationic complexes of rhodium(I) and iridium(I)

The structures and hydroformylation catalytic activities of polyphosphine complexes of rhodium(i), and related complexes-immobilised on polymer supports

Hydroformylation of 1-hexene catalysed by complexes of rhodium(I) with DI- or tritertiary phosphines