High-performance parallel computer architecture and systems have been improved at a phenomenal rate. In the meantime, VLSI computer-aided design (CAD) software for multibillion-transistor IC design has become increasingly complex and requires prohibitively high computational resources. Recent studies have shown that, numerous CAD problems, with their high computational complexity, can greatly benefit from the fast-increasing parallel computation capabilities. However, parallel programming imposes big challenges for CAD applications. Fully exploiting the computational power of emerging general-purpose and domain-specific multicore/many-core processor systems, calls for fundamental research and engineering practice across every stage of parallel CAD design, from algorithm exploration, programming models, design-time and run-time environment, to CAD applications, such as verification, optimization, and simulation. This journal special section will cover recent progress on parallel CAD research, including algorithm foundations, programming models, parallel architectural-specific optimization, and verification. More specifically, papers with in-depth and extensive coverage of the following topics will be considered, as well as other topics relevant to the design of parallel CAD algorithms and software tools. 1. Parallel algorithm design and specification for CAD applications 2. Parallel programming models and languages of particular use in CAD 3. Runtime support and performance optimization for CAD applications 4. Parallel architecture-specific design and optimization for CAD applications 5. Parallel program debugging and verification techniques particularly relevant for CAD The papers should be submitted via the Manuscript Central website and should adhere to standard ACM TODAES formatting requirements (http://todaes.acm.org/). The page count limit is 25.

Parallel CAD: Algorithm Design and Programming Special Section Call for Papers TODAES: ACM Transactions on Design Automation of Electronic Systems

The advent of multicore processors has renewed interest in the idea of incorporating transactions into the programming model used to write parallel programs. This approach, known as transactional memory, offers an alternative, and hopefully better, way to coordinate concurrent threads. The ACI (atomicity, consistency, isolation) properties of transactions provide a foundation to ensure that concurrent reads and writes of shared data do not produce inconsistent or incorrect results. At a higher level, a computation wrapped in a transaction executes atomically - either it completes successfully and commits its result in its entirety or it aborts. In addition, isolation ensures the transaction produces the same result as if no other transactions were executing concurrently. Although transactions are not a parallel programming panacea, they shift much of the burden of synchronizing and coordinating parallel computations from a programmer to a compiler, to a language runtime system, or to hardware. The challenge for the system implementers is to build an efficient transactional memory infrastructure. This book presents an overview of the state of the art in the design and implementation of transactional memory systems, as of early spring 2010. Table of Contents: Introduction / Basic Transactions / Building on Basic Transactions / Software Transactional Memory / Hardware-Supported Transactional Memory / Conclusions

Transactional Memory, 2nd Edition

Multithreaded programming is notoriously difficult to get right. A key problem is non-determinism, which complicates debugging, testing, and reproducing errors. One way to simplify multithreaded programming is to enforce deterministic execution, but current deterministic systems for C/C++ are incomplete or impractical. These systems require program modification, do not ensure determinism in the presence of data races, do not work with general-purpose multithreaded programs, or run up to 8.4× slower than pthreads. This paper presents Dthreads, an efficient deterministic multithreading system for unmodified C/C++ applications that replaces the pthreads library. Dthreads enforces determinism in the face of data races and deadlocks. Dthreads works by exploding multithreaded applications into multiple processes, with private, copy-on-write mappings to shared memory. It uses standard virtual memory protection to track writes, and deterministically orders updates by each thread. By separating updates from different threads, Dthreads has the additional benefit of eliminating false sharing. Experimental results show that Dthreads substantially outperforms a state-of-the-art deterministic runtime system, and for a majority of the benchmarks evaluated here, matches and occasionally exceeds the performance of pthreads.

/pdf/dthreads-efficient-deterministic-multithreading-4328mo1be6.pdf

Dthreads: efficient deterministic multithreading

Most high-performance software transactional memories (STM) use optimistic invisible reads. Consequently, a transaction might have an inconsistent view of the objects it accesses unless the consistency of the view is validated whenever the view changes. Although all STMs usually detect inconsistencies at commit time, a transaction might never reach this point because an inconsistent view can provoke arbitrary behavior in the application (e.g., enter an infinite loop). In this paper, we formally introduce a lazy snapshot algorithm that verifies at each object access that the view observed by a transaction is consistent. Validating previously accessed objects is not necessary for that, however, it can be used on-demand to prolong the view's validity. We demonstrate both formally and by measurements that the performance of our approach is quite competitive by comparing other STMs with an STM that uses our algorithm.

https://doc.rero.ch/record/18139/files/Riegel_Torvald_-_A_Lazy_Snapshot_Algorithm_with_Eager_Validation_20100430.pdf

A Lazy Snapshot Algorithm with Eager Validation

Cloud computing is a new computing paradigm, combining diverse client devices -- PCs, smartphones, sensors, single-function, and embedded -- with computation and data storage in the cloud. As with every advance in computing, programming is a fundamental challenge, as the cloud is a concurrent, distributed system running on unreliable hardware and networks. Orleans is a software framework for building reliable, scalable, and elastic cloud applications. Its programming model encourages the use of simple concurrency patterns that are easy to understand and employ correctly. It is based on distributed actor-like components called grains, which are isolated units of state and computation that communicate through asynchronous messages. Within a grain, promises are the mechanism for managing both asynchronous messages and local task-based concurrency. Isolated state and a constrained execution model allow Orleans to persist, migrate, replicate, and reconcile grain state. In addition, Orleans provides lightweight transactions that support a consistent view of state and provide a foundation for automatic error handling and failure recovery. We implemented several applications in Orleans, varying from a messaging-intensive social networking application to a data- and compute-intensive linear algebra computation. The programming model is a general one, as Orleans allows the communications to evolve dynamically at runtime. Orleans enables a developer to concentrate on application logic, while the Orleans runtime provides scalability, availability, and reliability.

/pdf/orleans-cloud-computing-for-everyone-32qfopevyg.pdf

Orleans: cloud computing for everyone

Building applications that are responsive and can exploit parallel hardware while remaining simple to write, understand, test, and maintain, poses an important challenge for developers. In particular, it is often desirable to enable various tasks to read or modify shared data concurrently without requiring complicated locking schemes that may throttle concurrency and introduce bugs.We introduce a mechanism that simplifies the parallel execution of different application tasks. Programmers declare what data they wish to share between tasks by using isolation types, and execute tasks concurrently by forking and joining revisions. These revisions are isolated: they read and modify their own private copy of the shared data only. A runtime creates and merges copies automatically, and resolves conflicts deterministically, in a manner declared by the chosen isolation type.To demonstrate the practical viability of our approach, we developed an efficient algorithm and an implementation in the form of a C# library, and used it to parallelize an interactive game application. Our results show that the parallelized game, while simple and very similar to the original sequential game, achieves satisfactory speedups on a multicore processor.

/pdf/concurrent-programming-with-revisions-and-isolation-types-k7bd4tr9jy.pdf

Concurrent programming with revisions and isolation types

With the advent of the Internet of Things, billions of objects or devices are inserted into the global computer network, generating and processing data at a volume never imagined before. This paper proposes a way to collect and process local data through a data fusion technology called summarization. The main feature of the proposal is the local data fusion, through parameters provided by the application, ensuring the quality of data collected by the sensor node. In the evaluation, the sensor node was compared when performing the data summary with another that performed a continuous recording of the collected data. Two sets of nodes were created, one with a sensor node that analyzed the luminosity of the room, which in this case obtained a reduction of 97% in the volume of data generated, and another set that analyzed the temperature of the room, obtaining a reduction of 80% in the data volume. Through these tests, it has been proven that the local data fusion at the node can be used to reduce the volume of data generated, consequently decreasing the volume of messages generated by IoT environments.

Data Summarization in the Node by Parameters (DSNP): Local Data Fusion in an IoT Environment

Semi-supervised and active learning through Manifold Reciprocal kNN Graph for image retrieval

A “Concurrent Sharing Model” provides a programming model based on revisions and isolation types for concurrent revisions of states, data, or variables shared between two or more concurrent tasks or programs. This model enables revisions of shared states, data, or variables to maintain determinacy despite nondeterministic scheduling between concurrent tasks or programs. More specifically, the Concurrent Sharing Model provides various techniques wherein shared states, data, or variables are conceptually replicated on forks, and only copied or written if necessary, then deterministically merged on joins such that concurrent tasks or programs can work with independent local copies of the shared states, data, or variables while ensuring automated conflict resolution. This model is applicable to a wide variety of system architectures, including applications that execute tasks on a CPU or GPU, applications that run, in full or in part, on multi-core processors without full shared-memory guarantees, and applications that run within cloud computing environments.

Sharing data among concurrent tasks

Euclidean-based search spaces have been extensively studied to drive optimization techniques to the search for better solutions. However, in high dimensional spaces, non-convex functions might become too tricky to be optimized, thus requiring different representations aiming at smoother fitness landscapes. In this paper, we present a variant of the Harmony Search algorithm based on quaternions, which extend complex numbers and have been shown to be suitable to handle optimization problems in high dimensional spaces. The experimental results in a number of benchmark functions against standard Harmony Search, Improved Harmony Search and Particle Swarm Optimization showed the robustness of the proposed approach. Additionally, we demonstrated the robustness of the proposed approach in the context of fine-tuning parameters in Restricted Boltzmann Machines.

Alexandro Baldassin

Papers

Concurrent programming with revisions and isolation types

Data Summarization in the Node by Parameters (DSNP): Local Data Fusion in an IoT Environment

Semi-supervised and active learning through Manifold Reciprocal kNN Graph for image retrieval

Sharing data among concurrent tasks

On the Harmony Search Using Quaternions