1.0. Introduction 4044 2.0. Biomass Chemistry and Growth Rates 4047 2.1. Lignocellulose and Starch-Based Plants 4047 2.2. Triglyceride-Producing Plants 4049 2.3. Algae 4050 2.4. Terpenes and Rubber-Producing Plants 4052 3.0. Biomass Gasification 4052 3.1. Gasification Chemistry 4052 3.2. Gasification Reactors 4054 3.3. Supercritical Gasification 4054 3.4. Solar Gasification 4055 3.5. Gas Conditioning 4055 4.0. Syn-Gas Utilization 4056 4.1. Hydrogen Production by Water−Gas Shift Reaction 4056

/pdf/synthesis-of-transportation-fuels-from-biomass-chemistry-3sckhzoqoz.pdf

Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering.

This paper provides an updated review on fast pyrolysis of biomass for production of a liquid usually referred to as bio-oil. The technology of fast pyrolysis is described including the major reaction systems. The primary liquid product is characterised by reference to the many properties that impact on its use. These properties have caused increasingly extensive research to be undertaken to address properties that need modification and this area is reviewed in terms of physical, catalytic and chemical upgrading. Of particular note is the increasing diversity of methods and catalysts and particularly the complexity and sophistication of multi-functional catalyst systems. It is also important to see more companies involved in this technology area and increased take-up of evolving upgrading processes. © 2011 Elsevier Ltd.

Review of fast pyrolysis of biomass and product upgrading

Biomass is an important feedstock for the renewable production of fuels, chemicals, and energy. As of 2005, over 3% of the total energy consumption in the United States was supplied by biomass, and it recently surpassed hydroelectric energy as the largest domestic source of renewable energy. Similarly, the European Union received 66.1% of its renewable energy from biomass, which thus surpassed the total combined contribution from hydropower, wind power, geothermal energy, and solar power. In addition to energy, the production of chemicals from biomass is also essential; indeed, the only renewable source of liquid transportation fuels is currently obtained from biomass.

The Catalytic Valorization of Lignin for the Production of Renewable Chemicals

Arsenic removal from water/wastewater using adsorbents—A critical review

Biochar as a sorbent for contaminant management in soil and water: a review.

Fast pyrolysis utilizes biomass to produce a product that is used both as an energy source and a feedstock for chemical production. Considerable efforts have been made to convert wood biomass to liquid fuels and chemicals since the oil crisis in mid-1970s. This review focuses on the recent developments in the wood pyrolysis and reports the characteristics of the resulting bio-oils, which are the main products of fast wood pyrolysis. Virtually any form of biomass can be considered for fast pyrolysis. Most work has been performed on wood, because of its consistency and comparability between tests. However, nearly 100 types of biomass have been tested, ranging from agricultural wastes such as straw, olive pits, and nut shells to energy crops such as miscanthus and sorghum. Forestry wastes such as bark and thinnings and other solid wastes, including sewage sludge and leather wastes, have also been studied. In this review, the main (although not exclusive) emphasis has been given to wood. The literature on woo...

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

The pyrolysis of southern pine, red oak, and sweet gum sawdust is reported. Pyrolysis experiments were conducted under either a helium or nitrogen atmosphere at ∼371−871 °C, to determine the balance between liquid and gas products. Gas- and liquid-phase pyrolysis products were identified using gas chromatography (GC) and GC/mass spectrometry (MS). A total of 109 liquid and 40 gas compounds were identified. A total of 59 chemical compounds (35 liquids and 24 gaseous products) were quantitatively determined. The influence of the gas-phase residence time and biomass feed particle size were studied. The gas residence time determined the extent of secondary reactions. Very short residence times enhanced liquid production versus gas production. Particle sizes (d 297 μm) did not have a pronounced effect on either the yield or product distributions, indicating that heat-transfer limitations within the particles were negligible. The pyrolysis of pine, red...

and Charles U. Pittman

Papers

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

Product Analysis and Thermodynamic Simulations from the Pyrolysis of Several Biomass Feedstocks