1.0. Introduction 4044 2.0. Biomass Chemistry and Growth Rates 4047 2.1. Lignocellulose and Starch-Based Plants 4047 2.2. Triglyceride-Producing Plants 4049 2.3. Algae 4050 2.4. Terpenes and Rubber-Producing Plants 4052 3.0. Biomass Gasification 4052 3.1. Gasification Chemistry 4052 3.2. Gasification Reactors 4054 3.3. Supercritical Gasification 4054 3.4. Solar Gasification 4055 3.5. Gas Conditioning 4055 4.0. Syn-Gas Utilization 4056 4.1. Hydrogen Production by Water−Gas Shift Reaction 4056

/pdf/synthesis-of-transportation-fuels-from-biomass-chemistry-3sckhzoqoz.pdf

Synthesis of transportation fuels from biomass: chemistry, catalysts, and engineering.

https://chemical.eng.usm.my/bassim/PDF/adsorption%20isotherm.pdf

Insights into the modeling of adsorption isotherm systems

Application of low-cost adsorbents for dye removal – A review

Dye and its removal from aqueous solution by adsorption: A review

Adsorption of methylene blue on low-cost adsorbents: A review

Synthesis of copper pillared bentonite ferrioxalate catalyst for degradation of 4-nitrophenol in visible light assisted Fenton process

https://uotechnology.edu.iq/dep-chem-eng/PAPERS/Khayoon%201.pdf

Utilization of crude karanj (Pongamia pinnata) oil as a potential feedstock for the synthesis of fatty acid methyl esters.

Titanium dioxide (TiO(2)) with an enhanced photocatalytic activity was developed by doping it with calcium ions through a sol-gel method The developed photocatalysts were characterized by Fourier transform infrared (FTIR) spectroscopy, N(2) physisorption, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction Their surface morphologies were studied using surface scanning electron microscopy (SEM) The XPS analyses confirmed the presence of Ti, O, Ca, and C in the Ca-doped TiO(2) sample The activities of the catalysts were evaluated by photocatalytic degradation of an azo dye, acid red 1 (AR1), using UV light irradiation The results of the investigations revealed that the samples calcined at 300 °C for 36h in a cyclic (2 cycles) mode had the best performance Lower percentage dopant, 03-10 wt%, enhanced the photocatalytic activity of TiO(2), with the best at 05 wt% Ca-TiO(2) The performance of 05 wt% Ca-TiO(2) in the degradation of AR1 was far superior to that of a commercial anatase TiO(2) Sigma product CAS No 1317-70-0 The effect of pH on the degradation of AR1 was studied, and the pH of the dye solution exerted a great influence on the degradation of the dye

B.H. Hameed

Papers

Synthesis of copper pillared bentonite ferrioxalate catalyst for degradation of 4-nitrophenol in visible light assisted Fenton process

Utilization of crude karanj (Pongamia pinnata) oil as a potential feedstock for the synthesis of fatty acid methyl esters.

Enhancement of the photocatalytic activity of TiO2 by doping it with calcium ions

Preparation of activated carbon by microwave heating of langsat (Lansium domesticum) empty fruit bunch waste.

NaY zeolite from wheat (Triticum aestivum L.) straw ash used for the adsorption of tetracycline