Recent achievements in the construction of surfaces with special wettabilities, such as superhydrophobicity, superhydrophilicity, superoleophobicity, superoleophilicity, superamphiphilicity, superamphiphobicity, superhydrophobicity/superoleophilicity, and reversible switching between superhydrophobicity and superhydrophilicity, are presented. Particular attention is paid to superhydrophobic surfaces created via various methods and surfaces with reversible superhydrophobicity and superhydrophilicity that are driven by various kinds of external stimuli. The control of the surface micro-/nanostructure and the chemical composition is critical for these special properties. These surfaces with controllable wettability are of great importance for both fundamental research and practical applications.

Design and Creation of Superwetting/Antiwetting Surfaces

Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction

A superhydrophobic surface is a surface with a water contact angle close to or higher than 150°. In this feature article, we review the historical and present research on superhydrophobic surfaces, including the characterization of superhydrophobicity, different ways to fabricate rough surfaces, and low-surface-energy modifications on inorganic and organic rough surfaces. It is the combination of surface roughness and low-surface-energy modification that leads to superhydrophobicity. Notably, research on superhydrophobic surfaces has not only fundamental interest but various possible functional applications in micro- and nano-materials and devices.

Superhydrophobic surfaces: from structural control to functional application

Research into extreme water-repellent surfaces began many decades ago, although it was only relatively recently that the term superhydrophobicity appeared in literature Here we review the work on the preparation of superhydrophobic surfaces, with focus on the different techniques used and how they have developed over the years, with particular focus on the last two years We discuss the origins of water-repellent surfaces, examining how size and shape of surface features are used to control surface characteristics, in particular how techniques have progressed to form multi-scaled roughness to mimic the lotus leaf effect There are notable differences in the terminology used to describe the varying properties of water-repellent surfaces, so we suggest some key definitions

Progess in superhydrophobic surface development.

A view of contact angle hysteresis from the perspectives of the three-phase contact line and of the kinetics of contact line motion is given. Arguments are made that advancing and receding are discrete events that have different activation energies. That hysteresis can be quantified as an activation energy by the changes in interfacial area is argued. That this is an appropriate way of viewing hysteresis is demonstrated with examples.

Contact angle hysteresis explained

A surface roughening method by simple chemical etching was developed for the fabrication of superhydrophobic surfaces on three polycrystalline metals, namely aluminum, copper, and zinc. The key to the etching technique was the use of a dislocation etchant that preferentially dissolves the dislocation sites in the grains. The etched metallic surfaces, when hydrophobized with fluoroalkylsilane, exhibited superhydrophobic properties with water contact angles of larger than 150°, as well as roll-off angles of less than 10° for 8-μL drops. Also, the dislocation etching concept introduced here may be helpful in the fabrication of superhydrophobic surfaces on other polycrystalline substrates.

Baitai Qian

Papers

Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates.