The review deals with drop impacts on thin liquid layers and dry surfaces. The impacts resulting in crown formation are referred to as splashing. Crowns and their propagation are discussed in detail, as well as some additional kindred, albeit nonsplashing, phenomena like drop spreading and deposition, receding (recoil), jetting, fingering, and rebound. The review begins with an explanation of various practical motivations feeding the interest in the fascinating phenomena of drop impact, and the above-mentioned topics are then considered in their experimental, theoretical, and computational aspects.

Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing ...

A drop hitting a solid surface can deposit, bounce, or splash. Splashing arises from the breakup of a fine liquid sheet that is ejected radially along the substrate. Bouncing and deposition depend crucially on the wetting properties of the substrate. In this review, we focus on recent experimental and theoretical studies, which aim at unraveling the underlying physics, characterized by the delicate interplay of not only liquid inertia, viscosity, and surface tension, but also the surrounding gas. The gas cushions the initial contact; it is entrapped in a central microbubble on the substrate; and it promotes the so-called corona splash, by lifting the lamella away from the solid. Particular attention is paid to the influence of surface roughness, natural or engineered to enhance repellency, relevant in many applications.

https://hal.archives-ouvertes.fr/hal-01398138/document

Drop Impact on a Solid Surface

Surfaces designed so that drops do not adhere to them but instead bounce off have received substantial attention because of their ability to stay dry, self-clean and resist icing. A drop striking a non-wetting surface of this type will spread out to a maximum diameter and then recoil to such an extent that it completely rebounds and leaves the solid material. The amount of time that the drop is in contact with the solid--the 'contact time'--depends on the inertia and capillarity of the drop, internal dissipation and surface-liquid interactions. And because contact time controls the extent to which mass, momentum and energy are exchanged between drop and surface, it is often advantageous to minimize it. The conventional approach has been to minimize surface-liquid interactions that can lead to contact line pinning; but even in the absence of any surface interactions, drop hydrodynamics imposes a minimum contact time that was conventionally assumed to be attained with axisymmetrically spreading and recoiling drops. Here we demonstrate that it is possible to reduce the contact time below this theoretical limit by using superhydrophobic surfaces with a morphology that redistributes the liquid mass and thereby alters the drop hydrodynamics. We show theoretically and experimentally that this approach allows us to reduce the overall contact time between a bouncing drop and a surface below what was previously thought possible.

Reducing the contact time of a bouncing drop

Undesired ice accumulation leads to severe economic issues and, in some cases, loss of lives. Although research on anti-icing has been carried out for decades, environmentally harmless, economical, and efficient strategies for anti-icing remain to be developed. Recent researches have provided new insights into the icing phenomenon and shed light on some promising bio-inspired anti-icing strategies. The present review critically categorizes and discusses recent developments. Effectively trapping air in surface textures of superhydrophobic surfaces weakens the interaction of the surfaces with liquid water, which enables timely removal of impacting and condensed water droplets before freezing occurs. When ice already forms, ice adhesion can be significantly reduced if liquid is trapped in surface textures as a lubricating layer. As such, ice could be shed off by an action of wind or its gravity. In addition, bio-inspired anti-icing strategies via trapping or introducing other media, such as phase change mate...

Bio-inspired strategies for anti-icing.

When a water drop bounces back from a hydrophobic surface, its initial, spherical shape is usually restored. Now, experiments with a specially engineered superhydrophobic surface made from micrometre-sized tapered pillars covered with copper oxide ‘nanoflowers’ show that droplets can bounce back with a flat, pancake-like shape. Engineering surfaces that promote rapid drop detachment1,2 is of importance to a wide range of applications including anti-icing3,4,5, dropwise condensation6 and self-cleaning7,8,9. Here we show how superhydrophobic surfaces patterned with lattices of submillimetre-scale posts decorated with nanotextures can generate a counter-intuitive bouncing regime: drops spread on impact and then leave the surface in a flattened, pancake shape without retracting. This allows a fourfold reduction in contact time compared with conventional complete rebound 1,10,11,12,13. We demonstrate that the pancake bouncing results from the rectification of capillary energy stored in the penetrated liquid into upward motion adequate to lift the drop. Moreover, the timescales for lateral drop spreading over the surface and for vertical motion must be comparable. In particular, by designing surfaces with tapered micro/nanotextures that behave as harmonic springs, the timescales become independent of the impact velocity, allowing the occurrence of pancake bouncing and rapid drop detachment over a wide range of impact velocities.

Pancake bouncing on superhydrophobic surfaces.

We first study the impact of a liquid drop of low viscosity on a super-hydrophobic surface. Denoting the drop size and speed as are the liquid density and surface tension). This law is also observed to hold on partially wettable surfaces, provided that liquids of low viscosity (such as water) are used. The law is interpreted as resulting from the effective acceleration experienced by the drop during its impact. Viscous drops are also analysed, allowing us to propose a criterion for predicting if the spreading is limited by capillarity, or by viscosity.

Maximal deformation of an impacting drop

Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink

https://hal.archives-ouvertes.fr/hal-01223577/document

Cédric Béguin

Papers

Maximal deformation of an impacting drop

Wind tunnel demonstration of galloping mitigation with a purely nonlinear energy sink

Two-phase damping for internal flow: Physical mechanism and effect of excitation parameters

Two-phase flow pattern identification in a tube bundle based on void fraction and pressure measurements, with emphasis on churn flow

Effect of Reynolds number on the stability of a single flexible tube predicted by the quasi-steady model in tube bundles