다중혈관 관상동맥 환자에서 y-문합을 이용하여 양쪽 내흉동맥만을 사용한 우회술의 조기 성적

“Unpaired Image-to-Image Translation using Cycle-Consistent Adversarial Networks”の学習報告

About the Author.Foreword.Preface.Glossary.1. Introduction.2. Video Formats and Quality.3. Video Coding Concepts.4. The MPEG-4 and H.264 Standards.5. MPEG-4 Visual.6. H.264/MPEG-4 Part 10.7. Design and Performance.8. Applications and Directions.Bibliography.Index.

H.264 and MPEG-4 Video Compression: Video Coding for Next-generation Multimedia

We survey recent developments in the design of large-capacity content-addressable memory (CAM). A CAM is a memory that implements the lookup-table function in a single clock cycle using dedicated comparison circuitry. CAMs are especially popular in network routers for packet forwarding and packet classification, but they are also beneficial in a variety of other applications that require high-speed table lookup. The main CAM-design challenge is to reduce power consumption associated with the large amount of parallel active circuitry, without sacrificing speed or memory density. In this paper, we review CAM-design techniques at the circuit level and at the architectural level. At the circuit level, we review low-power matchline sensing techniques and searchline driving approaches. At the architectural level we review three methods for reducing power consumption.

https://www.pagiamtzis.com/pubs/pagiamtzis-jssc2006.pdf

Content-addressable memory (CAM) circuits and architectures: a tutorial and survey

Advances in wireless communication technologies, such as wearable and implantable biosensors, along with recent developments in the embedded computing area are enabling the design, development, and implementation of body area networks. This class of networks is paving the way for the deployment of innovative healthcare monitoring applications. In the past few years, much of the research in the area of body area networks has focused on issues related to wireless sensor designs, sensor miniaturization, low-power sensor circuitry, signal processing, and communications protocols. In this paper, we present an overview of body area networks, and a discussion of BAN communications types and their related issues. We provide a detailed investigation of sensor devices, physical layer, data link layer, and radio technology aspects of BAN research. We also present a taxonomy of BAN projects that have been introduced/proposed to date. Finally, we highlight some of the design challenges and open issues that still need to be addressed to make BANs truly ubiquitous for a wide range of applications.

Body Area Networks: A Survey

Capacitive sensor array (CSA) plays an important role in life science applications, such as cell monitoring, DNA detection, or drug screening. This brief presents a <inline-formula> <tex-math notation="LaTeX">$480\times 960$ </tex-math></inline-formula> time-sharing TDC (ts-TDC) architecture of global shutter CSA. It provides an opportunity to merge interfacing, read-out and sampling circuits in pixel and dynamically adjust the electrode size according to the characteristic of biosample. Each pixel size is within <inline-formula> <tex-math notation="LaTeX">$2.25\times 2.25\,\,\mu m^{2}$ </tex-math></inline-formula>. The sensitivity of the proposed CSA is 6.896 codes/fF, and 43 fps can be adopted for real-time monitoring. Experiment results show that noise canceling significantly improves the sensing performance. Moreover, sensitivity can be optimized by given fusion-pixel pattern, making our proposal very flexible and suitable for cell biology applications and personalized medicine.

A 460 800 Pixels CMOS Capacitive Sensor Array With Programmable Fusion Pixels and Noise Canceling for Life Science Applications

Abstract Background Digital dental technology (DDT) has progressed and been introduced to Taiwan in the recent years, gradually changing the industry ecology. Many studies have demonstrated that DDT is more accurate and faster than conventional dental technology. However, there is a paucity of research exploring dental technicians’ perspectives on digital dental techniques, and their burnout, job satisfaction, and turnover intention. Methods This cross-sectional survey with convenience sampling was conducted at the conference venue of the Taiwan Association of Dental Technology to investigate the perspectives of dental technicians. We used the snowballing method in this study; two sampling methods were adopted, a convenience sampling of dental technicians to complete a survey, followed by asking the survey participants of the convenience sample to invite their colleagues to participate in the online survey. The survey questionnaire included questions on demographics, work-related information, acceptance and experiences of dental technicians toward DDT, occupational burnout, job satisfaction, and turnover intention. Regression models were used to determine the predictors of job satisfaction and determinants of turnover intention. Results In total, 341 valid questionnaires were obtained. Overall, the participants reported long working hours (95.5%), positive score on the DDT acceptance scale, moderate job satisfaction, higher personal burnout, and work burnout, along with lower over-commitment. Among them, 32.9% and 28.2% reported the intention to leave their organization and profession, respectively. The stepwise multiple regression model revealed that higher work burnout decreased job satisfaction, while higher DDT acceptance and position as employer increased job satisfaction. The binary logistic regression models revealed that geographical area of workplace, work burnout, and job satisfaction were significant predictors of turnover intentions. Conclusions Many Taiwanese dental technicians reported turnover intentions and higher burnout. With the trend of digitalization in the dental industry, even though most dental technicians had a positive outlook toward DDT, its influence on job satisfaction appears limited. Retaining good and professional talents required of a dental technician is crucial, especially as Taiwan’s dental care becomes increasingly specialized. Strategies for improving the work environment and occupational health of dental technicians should thus be the focus of future studies. 

/pdf/acceptance-and-experience-of-digital-dental-technology-1y3diu0c.pdf

Acceptance and experience of digital dental technology, burnout, job satisfaction, and turnover intention for Taiwanese dental technicians

An absolute time delay generating device includes a PVT (process-voltage-temperature) detection device and a delay-timing generator. The PVT detection device includes at least a delay module and a signal phase/frequency control module. The delay module includes a control unit and a reference unit. The control unit differs from the reference unit in sensitivity of delay property to PVT. The delay module compares phase or frequency differences generated when origin signals pass through the control unit and reference unit respectively, and produce delay parameters of the delay module. The signal phase/frequency control module receives and compares the delay parameters to determine an ambient PVT condition for the absolute time delay generating device, so as to control and correct the delay-timing generator and thereby generate accurate absolute time delay. Under various PVT influences, the absolute time delay generating device is capable of generating accurate, absolute time signals.

https://ir.nctu.edu.tw:443/bitstream/11536/105449/1/20100013536.pdf

Absolute time delay generating device

Forward Error Correction (FEC) is a key component in communication system which mostly contains scrambler, Reed-Solomon coding, interleaving, and trellis coding. For the performance and complexity issues, design parameters are different in various applications. In this paper, a multi-mode FEC processor is presented to meet different system requirements with a power and area efficient architecture. The proposed processor is fully compliant to ITU-T J.83 cable modem system including the reconfigurable Reed-Solomon decoder and memory-based universal convolutional interleaver. With 0.18 /spl mu/m 1P6M CMOS technology, the simulation result shows the FEC decoder can work over 100 MHz while costs 54.5 K gate counts and two 376/spl times/8 bits embedded duel-port SRAM. The average power consumption in most critical mode is about 34.2 mW at 100 MHz. While running at 7 MHz that meets symbol rate of cable modem, the power dissipation is 2.32 mW.

/pdf/a-power-and-area-efficient-multi-mode-fec-processor-21mnnrch4r.pdf

A power and area efficient multi-mode FEC processor

A cracking method for cracking a secret key of an encrypting device includes: building up a leakage model for the encrypting device; performing a mathematical calculation on the leakage model, according to a plurality of sets of input data, to generate a mathematical model; generating a plurality of sets of hypothesized keys; generating a plurality of sets of simulation data corresponding to the hypothesized keys using the mathematical model; providing the input data for the encrypting device and detecting a plurality of sets of leakage data generated by the encrypting device; performing the mathematical calculation on the leakage data to generate calculated data; determining a correlation between each of the simulation data and the calculated data; and determining one of the hypothesized keys to be consistent with the secret key according to the correlation.

Chen-Yi Lee

Papers

A 460 800 Pixels CMOS Capacitive Sensor Array With Programmable Fusion Pixels and Noise Canceling for Life Science Applications

Acceptance and experience of digital dental technology, burnout, job satisfaction, and turnover intention for Taiwanese dental technicians

Absolute time delay generating device

A power and area efficient multi-mode FEC processor

Cracking devices and methods thereof