Starting from the early 1990’s, the chemistry of polyvalent iodine organic compounds has experienced an explosive development. This surging interest in iodine compounds is mainly due to the very useful oxidizing properties of polyvalent organic iodine reagents, combined with their benign environmental character and commercial availability. Iodine(III) and iodine(V) derivatives are now routinely used in organic synthesis as reagents for various selective oxidative transformations of complex organic molecules. Several areas of hypervalent organoiodine chemistry have recently attracted especially active interest and research activity. These areas, in particular, include the synthetic applications of 2-iodoxybenzoic acid (IBX) and similar oxidizing reagents based on the iodine(V) derivatives, the development and synthetic use of polymer-supported and recyclable polyvalent iodine reagents, the catalytic applications of organoiodine compounds, and structural studies of complexes and supramolecular assemblies of polyvalent iodine compounds.

The chemistry of polyvalent iodine has previously been covered in four books1–4 and several comprehensive review papers.5–17 Numerous reviews on specific classes of polyvalent iodine compounds and their synthetic applications have recently been published.18–61 Most notable are the specialized reviews on [hydroxy(tosyloxy)iodo]benzene,41 the chemistry and synthetic applications of iodonium salts,29,36,38,42,43,46,47,54,55 the chemistry of iodonium ylides,56–58 the chemistry of iminoiodanes,28 hypervalent iodine fluorides,27 electrophilic perfluoroalkylations,44 perfluoroorgano hypervalent iodine compounds,61 the chemistry of benziodoxoles,24,45 polymer-supported hypervalent iodine reagents,30 hypervalent iodine-mediated ring contraction reactions,21 application of hypervalent iodine in the synthesis of heterocycles,25,40 application of hypervalent iodine in the oxidation of phenolic compounds,32,34,50–53,60 oxidation of carbonyl compounds with organohypervalent iodine reagents,37 application of hypervalent iodine in (hetero)biaryl coupling reactions,31 phosphorolytic reactivity of o-iodosylcarboxylates,33 coordination of hypervalent iodine,19 transition metal catalyzed reactions of hypervalent iodine compounds,18 radical reactions of hypervalent iodine,35,39 stereoselective reactions of hypervalent iodine electrophiles,48 catalytic applications of organoiodine compounds,20,49 and synthetic applications of pentavalent iodine reagents.22,23,26,59

The main purpose of the present review is to summarize the data that appeared in the literature following publication of our previous reviews in 1996 and 2002. In addition, a brief introductory discussion of the most important earlier works is provided in each section. The review is organized according to the classes of organic polyvalent iodine compounds with emphasis on their synthetic application. Literature coverage is through July 2008.

Chemistry of Polyvalent Iodine

The preparation, structure, and chemistry of hypervalent iodine compounds are reviewed with emphasis on their synthetic application. Compounds of iodine possess reactivity similar to that of transition metals, but have the advantage of environmental sustainability and efficient utilization of natural resources. These compounds are widely used in organic synthesis as selective oxidants and environmentally friendly reagents. Synthetic uses of hypervalent iodine reagents in halogenation reactions, various oxidations, rearrangements, aminations, C–C bond-forming reactions, and transition metal-catalyzed reactions are summarized and discussed. Recent discovery of hypervalent catalytic systems and recyclable reagents, and the development of new enantioselective reactions using chiral hypervalent iodine compounds represent a particularly important achievement in the field of hypervalent iodine chemistry. One of the goals of this Review is to attract the attention of the scientific community as to the benefits of...

Advances in Synthetic Applications of Hypervalent Iodine Compounds

A.L.-P. thanks CSIC for a contract under the JAE-doctor
program. Financial support by PLE2009 project from MCIINN
and Consolider-Ingenio 2010 (proyecto MULTICAT) are also
acknowledged.

Gold-catalyzed carbon-heteroatom bond-forming reactions.

C-C, C-O, C-N bond formation on sp2 carbon by Pd(II)-catalyzed reactions involving oxidant agents.

The development of catalytic reactions of alkenes transformed the chemical industry in the mid-20th century. Representative reactions included hydrogenation, oxidation, hydroformylation, oligomerization and polymerization. In 1959, researchers at Wacker Chemie developed a Pd-catalyzed method for the aerobic oxidative coupling of ethylene and water to produce acetaldehyde (eq 1, Scheme 1).1,2,3 This reaction represented the starting point for the development of numerous other Pd-catalyzed reactions in subsequent decades, ranging from alkene and diene oxidation reactions to cross-coupling reactions of aryl halides. 




(1)





Scheme 1

The Wacker Reaction.




The stoichiometric oxidation of ethylene by aqueous PdII salts had been known since the 19th century;4 however, the industrial Wacker Process owes its success to the recognition that the oxidized catalyst could be regenerated by molecular oxygen in the presence of cocatalytic CuCl2 (Scheme 1). The reaction proceeds through a β-hydroxyethyl-PdII intermediate that forms via the net addition of hydroxide and Pd across the C–C double bond of ethylene. This seemingly straightforward “hydroxypalladation” step has been the subject of extensive mechanistic research and controversy over the past five decades. A major focus of this debate has centered on whether the reaction proceeds by a cis-hydroxypalladation pathway, involving migration of a coordinated water or hydroxide to the ethylene molecule (eq 2), or a trans-hydroxypalladation pathway, involving nucleophilic attack of exogenous water or hydroxide on the coordinated ethylene molecule (eq 3). The current mechanistic understanding of the hydroxypalladation step in the Wacker Process is the subject of an excellent recent review by Keith and Henry.3




(2)







(3)



Soon after the discovery of the Wacker process, a number of research groups demonstrated that PdII could facilitate the addition of several different nucleophiles to alkenes, and a variety of oxidative and non-oxidative C–O, C–N, and C–C bond-forming transformations have been developed, including intra- and intermolecular reactions.5 The PdII-alkyl intermediate formed in the nucleopalladation step can participate in a number of subsequent transformations (e.g., see Scheme 2). Such opportunities, together with the broad functional-group compatibility and air- and moisture-tolerance of the PdII-catalysts, enable the preparation of important organic building blocks as well as useful hetero- and carbocyclic molecules.



Scheme 2

Versatility of the PdII-Alkyl Intermediate Arising from Alkene Nucleopalladation.



Nucleopalladation of an alkene often generates a new stereogenic center, and the synthetic utility of the catalytic reactions is enhanced significantly if the stereochemical course of C–Nu bond formation can be controlled. Enantioselective PdII-catalyzed functionalization of alkenes has experienced considerably less success than have many other classes of enantioselective transformations, despite the extensive history of the Wacker process and related oxidation reactions. The former reactions face several challenges. Phosphine ligands, which have been highly successful in other enantioselective processes, are often incompatible with the oxidants used in these reactions (such as O2), and their σ-donating ability can attenuate the electrophilicity and/or oxidizing ability of the PdII salts. A mechanistic basis for the difficulty in achieving effective enantioselective catalysis is that nucleopalladation reactions are capable of proceeding by two stereochemically different pathways: cis- or trans-nucleopalladation (Scheme 3). Experimental results obtained over the past 40 years, especially in the last decade, demonstrate that the energy barriers associated with these different pathways can be very similar, in some cases similar enough that both pathways operate in parallel. This mechanistic scenario can increase the difficulty of achieving high levels of enantioinduction.



Scheme 3

Stereochemical Pathways of Nucleopalladation.



In the present review, we summarize recent progress in two synergistic areas: (1) mechanistic studies of the stereochemical pathway of nucleopalladation reactions of alkenes (i.e., cis- vs. trans-nucleopalladation) under catalytically relevant reaction conditions and (2) advances in the development of enantioselective Pd-catalyzed reactions that proceed via nucleopalladation of an alkene substrate. The results summarized in the first portion of this review highlight the mechanistic complexity of these reactions and illustrate how subtle changes to the catalyst, substrate, and/or the reaction conditions can alter the stereochemical course of the reaction. Despite the challenges associated with enantioselective PdII-catalyzed reactions of alkenes, important progress has been made over the past 10–15 years. These advances are surveyed in the second portion of this review. The comprehensive coverage of this review begins with results from the late 1990s and early 2000s, when several important advances were made, including the first examples of highly enantioselective reactions proceeding via nucleopalladation6,7,8,9 and the development of ligand-supported Pd-catalysts for aerobic Wacker-type cyclization reactions.10,11 It is hoped that the collective presentation of mechanistic insights and empirical reaction-discovery efforts in this review will provide a foundation for accelerated progress in this important field.

Palladium(II)-Catalyzed Alkene Functionalization via Nucleopalladation: Stereochemical Pathways and Enantioselective Catalytic Applications

Intramolecular diamination reactions are described which yield cyclic ureas as direct products of an oxidative alkene transformation in the presence of palladium acetate and iodosobenzene diacetate as terminal oxidant. The reaction is truly catalytic in metal catalyst and represents the proof of principle for this elusive type of alkene oxidation.

Palladium(II)-catalyzed intramolecular diamination of unfunctionalized alkenes.

A first palladium-catalyzed intramolecular diamination of unfunctionalized terminal alkenes has recently been reported. This study investigates the details of its mechanistic course based on NMR titration, kinetic measurements competition experiments, and deuterium labeling. It concludes a two-step procedure consisting of syn-aminopalladation with an unligated palladium(II) catalyst state followed by oxidation to palladium(IV) and subsequent C−N bond formation to give the final products as cyclic diamines. Related reactions employing sulfamides give rise to aminoalkoxy-functionalization of alkenes. This process was investigated employing deuterated alkenes and found to follow an identical mechanism where stereochemistry is concerned. It exemplifies the importance of cationic palladium(IV) intermediates prior to the final reductive elimination from palladium and proves that the nucelophile for this step stems from the immediate coordination sphere of the palladium(IV) precursor. These results have importan...

Oxidative Diamination of Alkenes with Ureas as Nitrogen Sources: Mechanistic Pathways in the Presence of a High Oxidation State Palladium Catalyst

https://www.rsc.org/suppdata/CC/b7/b719479j/B719479J.PDF

Direct synthesis of bicyclic guanidines through unprecedented palladium(II) catalysed diamination with copper chloride as oxidant

Exploring the Nickel-Catalyzed Oxidation of Alkenes: A Diamination by Sulfamide Transfer

The oxidative intramolecular diamination of alkenes with tethered ureas and related groups as the nitrogen source has been investigated both with the iodonium reagent IPy(2)BF(4) (Py=pyridine) and under palladium catalysis in the presence of copper(II) bromide as a reoxidant. For terminal alkenes, the two procedures enable selective and high-yielding transformations. Studies with deuterated material led to the conclusion that the reactions proceed through different stereochemical pathways. An advanced protocol for palladium-catalyzed diamination through six-membered-ring annulation was also developed, and the first examples of the intramolecular diamination of internal alkenes are described. In this case, the same stereochemical outcome was observed for the iodonium-promoted and palladium-catalyzed transformations. On this basis, it was possible to determine the importance of aminohalogenated intermediates in both diamination reactions. Overall, the disclosed procedures broaden significantly the synthetic applicability of the oxidative intramolecular diamination of alkenes.

Claas H. Hövelmann

Papers

Palladium(II)-catalyzed intramolecular diamination of unfunctionalized alkenes.

Oxidative Diamination of Alkenes with Ureas as Nitrogen Sources: Mechanistic Pathways in the Presence of a High Oxidation State Palladium Catalyst

Direct synthesis of bicyclic guanidines through unprecedented palladium(II) catalysed diamination with copper chloride as oxidant

Exploring the Nickel-Catalyzed Oxidation of Alkenes: A Diamination by Sulfamide Transfer

Intramolecular diamination of alkenes with palladium(II)/copper(II) bromide and IPy2BF4: the role of halogenated intermediates.