This paper provides an updated review on fast pyrolysis of biomass for production of a liquid usually referred to as bio-oil. The technology of fast pyrolysis is described including the major reaction systems. The primary liquid product is characterised by reference to the many properties that impact on its use. These properties have caused increasingly extensive research to be undertaken to address properties that need modification and this area is reviewed in terms of physical, catalytic and chemical upgrading. Of particular note is the increasing diversity of methods and catalysts and particularly the complexity and sophistication of multi-functional catalyst systems. It is also important to see more companies involved in this technology area and increased take-up of evolving upgrading processes. © 2011 Elsevier Ltd.

Review of fast pyrolysis of biomass and product upgrading

Renewable fuels and chemicals by thermal processing of biomass

Fast pyrolysis for production of liquids has developed considerably since the first experiments in the late 1970s. Many reactors and processes have been investigated and developed to the point where fast pyrolysis is now an accepted feasible and viable route to renewable liquid fuels, chemicals and derived products. It is also now clear that liquid products offer significant advantages in storage and transport over gas and heat. These advantages have caused greater attention to be paid to fast pyrolysis, leading to significant advances in process development. The technology of fast pyrolysis for liquids is noteworthy for the wide range of reactor configurations that have been developed to meet the stringent requirements for high yields of useful liquids, for use as a fuel in boilers, engines and turbines and as a source of chemical commodities. This review summarizes the key features of fast pyrolysis and the resultant liquid product and describes the major reaction systems and processes that have been developed over the last 20 years.

http://ehsan13967.persiangig.com/document/pyrolysis5.pdf

Fast pyrolysis processes for biomass

This book offers comprehensive coverage of the design, analysis, and operational aspects of biomass gasification, the key technology enabling the production of biofuels from all viable sources--some examples being sugar cane and switchgrass. This versatile resource not only explains the basic principles of energy conversion systems, but also provides valuable insight into the design of biomass gasifiers. The author provides many worked out design problems, step-by-step design procedures and real data on commercially operating systems. After fossil fuels, biomass is the most widely used fuel in the world. Biomass resources show a considerable potential in the long term if residues are properly handled and dedicated energy crops are grown. 5 years of the author's research in the area Biomass fuel production First book devoted to Biomass Gasification Includes step-by-design procedures, cases studies and worked out numerical examples

Biomass Gasification and Pyrolysis: Practical Design and Theory

Power production from biomass derived pyrolysis liquids has been under development for the past few years. If technically successful, it would make decentralized bio-energy production possible. Several technologies and system components have been developed by academia, R&D organizations, and industrial companies in many countries. Much experience has been gained and many useful results published. The present work aims at reviewing the most significant experience in power generation from biomass liquids produced by fast pyrolysis processes. Power plant technologies addressed are diesel engines, gas turbines, and natural gas/steam power plants. Main results are reviewed and R&D needs identified for each technology. The analysis shows that even for the most promising solutions long-term demonstration has not yet been achieved. Pyrolysis liquid use in gas turbine plants and in co-firing mode in large power stations are technically most advanced. Recent work with diesel engines also appears quite promising.

http://www.combio-project.com/download/PDF/Power_generation_using_fast_pyrolysis_liquids_from_biomass.pdf

Power generation using fast pyrolysis liquids from biomass

A handicap facing both the producer and the user of fast-pyrolysis oils is the lack of a description of these oils that is adequate for commercial applications. These oils are highly oxygenated and are relatively immiscible with petroleum oils. Under the current IEA Biomass Energy Agreement, the new Pyrolysis Activity (PYRA) has taken on the task of establishing a useful description of a series of pyrolysis oils. This series roughly parallels that of petroleum fuel oils already described, so that with as few changes as possible to the users’ equipment, a bio-oil could be used in place of the equivalent petroleum-derived oil. The specifications for biomass pyrolysis oils differ in the density, heating value, water content, and corrosiveness. These proposed specifications are presented for discussion by the biomass conversion community and feedback to the Pyrolysis Activity.

D. Huffman

Papers

Proposed Specifications for Various Grades of Pyrolysis Oils